Schneider Electric HMISAC, EAN: 3606480564796

Schneider Electric HMISAC rear panel HMI controller

Industrial Material > Automation > PLC Systems

Schneider Electric HMISAC rear panel HMI controller

Lieske Part No. 1856861
Mfg Part No HMISAC
EAN-Code 3606480564796
Manufacturer Schneider Electric
Here only 634,18 EUR
754,67 EUR incl. VAT

Further information for Schneider Electric HMISAC rear panel HMI controller

Complementary
SupplyExternal source
[Us] rated supply voltage24 V (20.4…28.8 V)DC
Immunity to microbreaks10 ms
Inrush current30 A
Power consumption in W15 W
Local signallingNo indicator
Number of pagesLimited by internal memory capacity
Operating systemHarmony
Processor nameCPU RISC
Memory descriptionFlash NAND, 128 MB; Internal data storage FRAM, 128 kB; Application run DRAM, 128 MB
Integrated connection type1 serial link - RJ45 - RS232/RS485 (rate:
Realtime clockBuilt-in
Downloadable protocolsModbus; Modbus TCP/IP; CANopen
Fixing modeBy 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel
Enclosure materialPC/PBT
Shock resistance147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27; 294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
Vibration resistance+/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6; 1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
Discrete input number2 for fast input (normal mode) conforming to IEC 61131-2 Type 1; 14 for digital input conforming to IEC 61131-2 Type 1
Discrete input voltage24 V DC, discrete input logic: sink or source (positive/negative)
Number of common point1 for fast input (HSC mode); 2 for digital input
Discrete input current7.83 mA for fast input; 5 mA for digital
Input impedance4.7 kOhm; 2.81 kOhm
Sensor power supply15…28.8 V DC >= 15 V, current (state 1): >= 5 mA = 2.5 mA
Configurable filtering time0 ms no filter (none); 0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2)); 3...12 ms integrator (none/run/stop)
Maximum input frequency100 kHz for fast input (encoder mode) - control type A/B; 100 kHz for fast input - control type single phase; 100 kHz for fast input - control type pulse/direction
Maximum cable distance between devicesShielded cable:
Connection pitch3.5 mm
Overvoltage protectionWith overvoltage protection
Isolation between channels and internal logic500 V DC
Isolation between channelsNone
Discrete output number2 fast output (normal mode), output logic: source; 8 digital output, output logic: source
Discrete output voltage24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s); 24 V DC (voltage limit: 5...30 V) with relay discrete output(s); 220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
Input/output number2 for fast input, terminal(s): FI0...FI1; 14 for digital input, terminal(s): DI0...DI13; 2 for fast output, terminal(s): FQ0...FQ1; 8 for digital output, terminal(s): DQ0...DQ7
Discrete output current2 A 4 A), response time 5 ms with opening contact for digital output; 2 A 4 A), response time 2 ms with closing contact for digital output; 300 mA, response time 2 ms for fast output (normal mode); 50 mA, response time 2 ms for fast output (PWM or PTO mode)
Insulation resistance> 10 MOhm between the I/O and internal logic; > 10 MOhm between power supply and earth
Maximum output frequency100 kHz for fast output (PTO mode); 1 kHz for fast output (PWM mode)
Absolute accuracy error+/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode); 1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode); +/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode); +/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode); +/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
Height50.65 mm
Width128 mm
Depth102 mm
Net weight0.359 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsFCC Class A; ANSI/ISA 12-12-01; UL 508; IEC 61000-6-2; EN 61131-2; CSA C22.2 No 213 Class I Division 2
Product certificationsGOST; C-Tick; KCC; cULus 508; cULus CSA 22-2 No 142; cUL 1604 Class 1 Division 2
MarkingCE
Ambient air temperature for operation0…50 °C
Ambient air temperature for storage-20…60 °C
Relative humidity5…85 % without condensation
Storage altitude0…10000 m
Maximum pressure800...1114 hPa
IP degree of protectionIP20 (rear panel) conforming to IEC 60529; IP65 (front panel) conforming to IEC 60529
NEMA degree of protectionNEMA 4X front panel
Pollution degree2 conforming to IEC 60664
Environmental characteristicCorrosive gas free
Logistical informations
Country of originID
Main
Range of productHarmony SCU
Product or component typeController
Device presentationBasic element
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height9.200 cm
Package 1 Width19.000 cm
Package 1 Length26.800 cm
Package 1 Weight988.000 g
Unit Type of Package 2S03
Number of Units in Package 26
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight6.677 kg
HMI controller Magelis SCU Small. Spare parts. Rear part HMI controller, 16 inputs/10 outputs, digital. Use Replacement digital controller module for HMISCU.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1856861
qrcode für Schneider Electric HMISAC rear panel HMI controller