| Complementary |
| [Ui] rated insulation voltage | 600 V conforming to UL 508; 690 V conforming to IEC 60947-1; 600 V conforming to CSA C22.2 No 14 |
| [Ue] rated operational voltage | 48...690 V AC; 24...240 V DC |
| [Ith] conventional free air thermal current | 6 A |
| Mechanical durability | 100000 cycles |
| Minimum switching current | 5 mA |
| Minimum switching voltage | 17 V |
| Protection type | GB2CB... circuit breaker; GG fuse 10 A |
| Rated operational power in VA | 300 VA at 48 V AC-15 - electrical durability: 100000 cycles; 414 VA at 690 V AC-15 - electrical durability: 100000 cycles; 500 VA at 110…127 V AC-15 - electrical durability: 100000 cycles; 500 VA at 500 V AC-15 - electrical durability: 100000 cycles; 650 VA at 440 V AC-15 - electrical durability: 100000 cycles; 720 VA at 230…240 V AC-15 - electrical durability: 100000 cycles; 850 VA at 380…415 V AC-15 - electrical durability: 100000 cycles |
| Rated operational power in W | 120 W at 240 V DC-13 - electrical durability: 100000 cycles; 140 W at 110 V DC-13 - electrical durability: 100000 cycles; 140 W at 24 V DC-13 - electrical durability: 100000 cycles; 180 W at 60 V DC-13 - electrical durability: 100000 cycles; 240 W at 48 V DC-13 - electrical durability: 100000 cycles |
| Tightening torque | 1.4 N.m screw clamp terminals |
| Height | 89 mm |
| Width | 9.3 mm |
| Depth | 66 mm |
| Net weight | 0.05 kg |
| Colour | Dark grey |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Environmental characteristic | Normal environment |
| Standards | EN/IEC 60947-5-1; UL 60947-4-1; CSA C22.2 No 60947-4-1; IEC/EN 60335-1:Clause 30.2; IEC/EN 60335-2-40:Annex JJ |
| Product certifications | CB Scheme; CE; UKCA; CCC; cULus; EAC |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range | TeSys; TeSys Deca |
| Device short name | GVAN |
| Product or component type | Auxiliary contact block |
| Product compatibility | GV2P; GV2L; GV2ME; GV2LE; GV2RT; GV2LM; GV3P; GV3L |
| Mounting location | Left side |
| Pole contact composition | 1 NO + 1 NC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1.5 cm |
| Package 1 Width | 13 cm |
| Package 1 Length | 15 cm |
| Package 1 Weight | 42 g |
| Unit Type of Package 2 | S01 |
| Number of Units in Package 2 | 25 |
| Package 2 Height | 15 cm |
| Package 2 Width | 15 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 1.245 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 800 |
| Package 3 Height | 75 cm |
| Package 3 Width | 60 cm |
| Package 3 Length | 80 cm |
| Package 3 Weight | 49.84 kg |
The GVAN11 from Schneider Electric is an auxiliary switch block from the TeSys Deca product range, specifically designed for use with motor protection circuit breakers of types GV2P, GV2L, GV2ME, GV2LE, GV2RT, GV2LM, GV3P and GV3L. It serves as an additional switching contact to transmit signals from the main function of the motor protection circuit breaker to external control systems, indicators or safety circuits. The switch is intended for mounting on the left side of the motor protection circuit breaker and enables integration into existing control and monitoring systems. The construction includes an
auxiliary switch block with a
composition of 1 S + 1 Ö, i.e. one normally open and one normally closed contact, connected via screw terminals. The
screw terminals require a tightening torque of 1.4 Nm to ensure a secure and durable connection.
Applications
The GVAN11 is used in industrial plants where monitoring the status of motors or transformers is required. It is suitable for applications in manufacturing automation, process engineering and power supply, where signal transmission of switching states (e.g. motor switched on or off) to control devices or warning systems is necessary. The device is used in conjunction with motor protection circuit breakers from the GV2/3 series, available in power ranges from 0.1 to 65 A. Mounting is on the left side of the main device, enabling standardized integration into enclosures and control systems.
Functions and Equipment in Detail
The auxiliary switch block features a
rated insulation voltage of 600 V according to UL 508 and CSA C22.2 No. 14, as well as 690 V according to IEC 60947-1, ensuring safe insulation even at high voltages. The
operating rated voltage ranges from 48 to 690 V AC and 24 to 240 V DC, enabling broad applicability in various electrical systems. The
conventional thermal current in free air is 6 A, indicating the maximum current load capacity of the contact. The
mechanical life is specified at 100,000 cycles, indicating high load capacity and durability. The
minimum switching voltage is 17 V and the
minimum switching current is 5 mA, ensuring reliability even under low load conditions.
Technology Explained Simply
The GVAN11 operates as a mechanically coupled auxiliary switch that reflects the state of the main motor protection circuit breaker. When the motor protection circuit breaker trips, for example, due to overload protection or a short circuit, the auxiliary switch responds accordingly – the normally closed contact opens and the normally open contact closes. This enables the control of external devices, such as a warning light or relay, to visually or electrically monitor the operating state. The
protection class GB2CB refers to use with power circuit breakers and GG fuses up to 10 A, defining the installation conditions in enclosures. The
rated operational powers vary depending on voltage and range from 300 VA (at 48 V AC) to 850 VA (at 380–415 V AC), with electrical endurance also rated at 100,000 cycles. For direct current, the values range from 120 W (240 V DC) to 240 W (48 V DC). These values define the maximum power the contact can safely switch.
Compatibility and Accessories
The GVAN11 is specifically developed for use with motor protection circuit breakers from the GV2 and GV3 series by Schneider Electric. Compatible models include, for example, GV2L22, GV3L32, GV2P05, GV2LE05, GV2ME08, GV3P25, GV2L04, GV2L20, GV2RT10, GV2ME14, GV2ME21, GV2P21, GV2P07, GV2LE32, GV2LE22, GV2ME22, GV2ME02, GV2L10, GV2P20 and GV2RT08. These devices cover a power range from 0.1 to 65 A and offer different tripping mechanisms such as magnetic trip units, rotary drives or push-button operation. Combining these motor protection circuit breakers enables flexible adaptation to various requirements in industrial control technology.
Mounting and Installation
Mounting is on the left side of the motor protection circuit breaker, with the screw terminals tightened to a torque of 1.4 Nm. The dimensions of the auxiliary switch block are 89 mm (height), 9.3 mm (width) and 66 mm (depth), enabling compact integration into enclosures. The color is dark gray, matching the standard color scheme of TeSys devices. Installation is carried out under normal environmental conditions, complying with standards EN/IEC 60947-5-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1, as well as IEC/EN 60335-1 and -2-40. Product certifications include CB regulation, CE, UKCA, CCC, cULus and EAC, confirming compliance with international safety and quality standards.
Advantages in Operation
The GVAN11 provides reliable signal transmission with high mechanical life and is designed for a wide range of voltage and current ranges. The use of screw terminals ensures simple and secure connections. Compatibility with a broad range of motor protection circuit breakers from the GV2/3 series enables flexible use in various plants. Compliance with international standards and certifications ensures safe operation in industrial environments. The device is designed for use in enclosures and requires no additional mounting aids or tools beyond standard tools. Batteries are not included in the delivery scope.