| Complementary |
| [Ui] rated insulation voltage | 300 V conforming to UL 508; 300 V conforming to CSA C22.2 No 14; 250 V conforming to IEC 60947-1 |
| [Ue] rated operational voltage | 24...240 V AC; 24...60 V DC |
| [Ith] conventional free air thermal current | 2.5 A |
| Mechanical durability | 100000 cycles |
| Minimum switching current | 5 mA |
| Minimum switching voltage | 17 V |
| Protection type | GG fuse 10 A; GB2CB06 circuit breaker 10 A maximum |
| Rated operational power in VA | 120 VA at 110…120 V AC-15 - electrical durability: 100000 cycles; 120 VA at 230…240 V AC-15 - electrical durability: 100000 cycles; 48 VA at 24 V AC-15 - electrical durability: 100000 cycles; 60 VA at 48 V AC-15 - electrical durability: 100000 cycles |
| Rated operational power in W | 15 W at 48 V DC-13 - electrical durability: 100000 cycles; 24 W at 24 V DC-13 - electrical durability: 100000 cycles; 9 W at 60 V DC-13 - electrical durability: 100000 cycles |
| Tightening torque | 1.7 N.m screw clamp terminals |
| Height | 11 mm |
| Width | 45 mm |
| Depth | 29 mm |
| Net weight | 0.02 kg |
| Colour | Dark grey |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Environmental characteristic | Normal environment |
| Standards | EN/IEC 60947-5-1; UL 60947-4-1; CSA C22.2 No 60947-4-1; IEC/EN 60335-1:Clause 30.2; IEC/EN 60335-2-40:Annex JJ |
| Product certifications | CB Scheme; CE; UKCA; CCC; cULus; EAC |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range | TeSys; TeSys Deca |
| Device short name | GVAE |
| Product or component type | Auxiliary contact block |
| Product compatibility | GV2P; GV2L; GV2ME; GV2LE; GV2RT; GV2LM; GV3P; GV3L |
| Mounting location | Front side |
| Pole contact composition | 2 NO |
| Quantity per set | Set of 10 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1.000 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 9.000 cm |
| Package 1 Weight | 18.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 3.000 cm |
| Package 2 Width | 20.000 cm |
| Package 2 Length | 27.000 cm |
| Package 2 Weight | 183.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 260 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 5.204 kg |
The GVAE20 from Schneider Electric is an auxiliary switch block from the TeSys Deca product series, specifically designed for integration into motor protection circuit breakers of the GV2 and GV3 series with rated currents from 0.1 to 65 A. It serves as an auxiliary contact to enable additional switching functions such as signal inputs and outputs, status indication, or control of auxiliary devices during plant operation. The switch is mounted on the front side and features screw terminals for connection to wiring. The configuration includes two close contacts (2S), meaning that when the main device is actuated, both contacts close. The maximum number of auxiliary switches per device is one, so the GVAE20 is used as a single block.
Applications
This auxiliary switch block is designed for industrial applications where status monitoring or remote control of motor protection circuit breakers is required. It is commonly used in systems controlling motors, pumps, fans, or other electrical loads, where a signal indicating the operating state (e.g., on/off) must be transmitted to a control device, PLC, or operator console. Compatibility with various models from the GV2 and GV3 series—including GV2P, GV2L, GV2ME, GV2LE, GV2RT, GV2LM, GV3P, and GV3L—enables flexible use in different switching installations.
Functions and Equipment in Detail
The GVAE20 has a mechanical life of 100,000 switching cycles, making it suitable for long-term operational requirements in industrial environments. The electrical endurance is also 100,000 cycles, with the rated operational power varying depending on the voltage system: 120 VA at 110–120 V AC-15, 120 VA at 230–240 V AC-15, 48 VA at 24 V AC-15, and 60 VA at 48 V AC-15. For direct current, the rated power is 24 W at 24 V DC-13, 15 W at 48 V DC-13, and 9 W at 60 V DC-13. The rated operational voltage ranges from 24 to 240 V AC and 24 to 60 V DC, with the rated insulation voltage being 300 V (equivalent to UL 508 and CSA C22.2 No. 14) and 250 V (equivalent to IEC 60947-1). The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, ensuring reliable switching performance even under low-load conditions.
Technology Explained Simply
The auxiliary switch block operates mechanically in sync with the main device, so the state of the motor protection circuit breaker (on or off) is transmitted via the auxiliary contacts. The screw terminals allow for a secure and durable connection with cables, with the required tightening torque being 1.7 Nm. The device color is dark gray, and its dimensions are 45 mm (width), 11 mm (height), and 29 mm (depth). The product weight is 0.02 kg. Certifications include CB Regulation, CE, UKCA, CCC, cULus, and EAC, confirming compliance with international safety and quality standards.
Compatibility and Accessories
The GVAE20 is compatible with a wide range of motor protection circuit breakers from the GV2 and GV3 series, including models such as GV2ME06, GV2L32, GV2RT07, GV2P04, GV3P73, and GV3L25. These devices can be combined with the auxiliary switch block to enable additional functions such as status indication, remote control, or signal output.
Mounting and Installation
Mounting is performed on the front side of the motor protection circuit breaker, with screw terminals provided for connection to control wiring. Installation requires no special tools other than a screwdriver to achieve the specified tightening torque of 1.7 Nm. The installation dimensions are compact, allowing the auxiliary switch block to be easily integrated into standardized enclosures or control systems.
Operational Advantages
The use of the GVAE20 enables precise status monitoring and remote control of motor protection circuit breakers. The high mechanical and electrical life ensures reliable performance over long operating periods. Compatibility with various models from the GV2 and GV3 series offers flexibility in system design. The screw terminals ensure a secure and maintenance-friendly connection. Certifications according to international standards such as IEC/EN 60947-5-1, UL 60947-4-1, and CSA C22.2 No. 60947-4-1 confirm the safety and quality of the product.