| Complementary |
| [Ui] rated insulation voltage | 300 V conforming to UL 508; 300 V conforming to CSA C22.2 No 14; 250 V conforming to IEC 60947-1 |
| [Ue] rated operational voltage | 24...240 V AC; 24...60 V DC |
| [Ith] conventional free air thermal current | 2.5 A |
| Mechanical durability | 100000 cycles |
| Minimum switching current | 5 mA |
| Minimum switching voltage | 17 V |
| Protection type | GG fuse 10 A; GB2CB06 circuit breaker 10 A maximum |
| Rated operational power in VA | 120 VA at 110…120 V AC-15 - electrical durability: 100000 cycles; 120 VA at 230…240 V AC-15 - electrical durability: 100000 cycles; 48 VA at 24 V AC-15 - electrical durability: 100000 cycles; 60 VA at 48 V AC-15 - electrical durability: 100000 cycles |
| Rated operational power in W | 15 W at 48 V DC-13 - electrical durability: 100000 cycles; 24 W at 24 V DC-13 - electrical durability: 100000 cycles; 9 W at 60 V DC-13 - electrical durability: 100000 cycles |
| Tightening torque | 1.7 N.m screw clamp terminals |
| Height | 11 mm |
| Width | 45 mm |
| Depth | 29 mm |
| Net weight | 0.02 kg |
| Colour | Dark grey |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Environmental characteristic | Normal environment |
| Standards | EN/IEC 60947-5-1; UL 60947-4-1; CSA C22.2 No 60947-4-1; IEC/EN 60335-1:Clause 30.2; IEC/EN 60335-2-40:Annex JJ |
| Product certifications | CB Scheme; CE; UKCA; CCC; cULus; EAC |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range | TeSys; TeSys Deca |
| Device short name | GVAE |
| Product or component type | Auxiliary contact block |
| Product compatibility | GV2P; GV2L; GV2ME; GV2LE; GV2RT; GV2LM; GV3P; GV3L |
| Mounting location | Front side |
| Pole contact composition | 1 NO/NC |
| Quantity per set | Set of 10 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1 cm |
| Package 1 Width | 6 cm |
| Package 1 Length | 7 cm |
| Package 1 Weight | 12 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 3 cm |
| Package 2 Width | 20.2 cm |
| Package 2 Length | 26 cm |
| Package 2 Weight | 130 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 260 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 3.821 kg |
The auxiliary switch block GVAE1 from Schneider Electric belongs to the TeSys and TeSys Deca series and serves as an additional component for motor protection circuit breakers of the GV2 and GV3 series in the nominal current range of 0.1 to 65 A. It enables the integration of auxiliary switching functions into existing control systems, particularly for signal transmission or controlling external devices. The switch block is mounted on the front side and features a screw connection, ensuring a secure and reliable connection. The contact configuration includes one close contact (S) and one open contact (Ö), making it suitable for various applications in industrial control technology.
Applications
The GVAE1 is used in industrial installations where state monitoring of motor protection circuit breakers is required. It can be used, for example, to feed back the switch status to a control system, operator panel, or monitoring system. Compatibility with various models of the GV2 and GV3 series—including GV2P, GV2L, GV2ME, GV2LE, GV2RT, GV2LM, GV3P, and GV3L—makes it a universally applicable component in different control system configurations.
Functions and Equipment in Detail
The auxiliary switch block is designed for operating voltages of 24 to 240 V AC and 24 to 60 V DC. The rated insulation voltage is 300 V according to UL 508 and CSA C22.2 No. 14, and 250 V according to IEC 60947-1. The mechanical life expectancy is 100,000 switching cycles, ensuring high reliability in continuously operated systems. The minimum switching current is 5 mA, and the minimum switching voltage is 17 V, ensuring functionality even under low-load conditions. The rated operational power varies depending on voltage: 120 VA at 110–120 V AC, 120 VA at 230–240 V AC, 48 VA at 24 V AC, and 60 VA at 48 V AC. For direct current, the power is 24 W at 24 V DC, 15 W at 48 V DC, and 9 W at 60 V DC. The electrical endurance is also 100,000 cycles.
Technology Explained Simply
The auxiliary switch block operates mechanically in sync with the main contact of the motor protection circuit breaker. When the main contact closes, the auxiliary switch (S) also closes, and when it opens, the auxiliary switch (Ö) also opens. This enables transmission of the switch status to external systems. The screw terminals with a tightening torque of 1.7 Nm ensure a stable electrical connection. The protection rating is designed for use with GG fuses up to 10 A and power circuit breakers up to 10 A. The device color is dark gray, and the dimensions are 45 mm width, 11 mm height, and 29 mm depth. The product weight is 0.02 kg.
Compatibility and Accessories
The GVAE1 is compatible with a wide range of motor protection circuit breakers from the GV2 and GV3 series, including models such as GV2RT10, GV2L10, GV2RT08, GV2LE22, GV2ME10, GV3P80, GV2ME08, GV2P08, GV2LE05, GV2P22, GV2L20, GV2L22, GV2ME02, GV2LE08, GV2P16, GV2ME03, GV2RT03, GV2L03, GV2LE10, and GV2L16. These devices can be combined with the auxiliary switch block to implement additional control and monitoring functions.
Mounting and Installation
Mounting is performed on the front side of compatible motor protection circuit breakers. The screw terminals allow for easy and secure connections. Installation does not require special tools or additional components. The environmental conditions are defined as normal, allowing use in typical industrial environments without special protection requirements.
Operational Advantages
The GVAE1 provides a reliable and low-maintenance solution for monitoring the status of motor protection circuit breakers. The high mechanical life expectancy and electrical endurance ensure long-term operation. Compatibility with various models of the GV2 and GV3 series increases flexibility in system design. Clear signal transmission via auxiliary switches simplifies diagnosis and control in complex installations.
Standards and Certifications
The auxiliary switch block complies with standards EN/IEC 60947-5-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1, IEC/EN 60335-1:Clause 30.2, and IEC/EN 60335-2-40:Annex JJ. Product certifications include CB Scheme, CE, UKCA, CCC, cULus, and EAC, confirming compliance with international safety and quality standards. The warranty period is 18 months.
The delivery includes the auxiliary switch block GVAE1. Packaging units are available in various sizes: single piece (VPE 1), set of 10 pieces (VPE 2), and bulk pack of 260 pieces (VPE 3).