Schneider Electric GBX080003K, EAN: 3606480388316

Schneider Electric GBX080003K gear PLE080 I=3

Schneider Electric GBX080003K gear PLE080 I=3

Lieske Part No. 510163
Mfg Part No GBX080003K
EAN-Code 3606480388316
Manufacturer Schneider Electric
Here only 433,24 EUR
515,56 EUR incl. VAT

Further information for Schneider Electric GBX080003K gear PLE080 I=3

Complementary
Maximum torsional backlash7 arc.min
Torsional rigidity6 N.m/arcmin
Housing colourBlack
Housing materialBlack anodized aluminium
Shaft materialC 45
Additional informationLubricated for life
Service life in hours30000 h at 100 rpm at 30 °C
Mounting positionAny position
Efficiency97.0 %
Maximum radial force Fr650 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C
Maximum axial force Fa1200 N at 100 rpm, during 30000 hour at 30°C
moment of inertia0.455 kg.cm²
Continuous output torque85 N.m at 100 rpm at 30 °C
Maximum output torque136 N.m at 100 rpm at 30 °C
Net weight2.1 kg
Input diameter19.0 mm
No load running torque0.1 N.m
Compatibility codeGBX
Internal length72.0 mm
Contractual warranty
Warranty (in months)18
Environment
Noise level60 dB at 1 m, no-load
IP degree of protectionShaft output: IP54
ambient temperature for operation-25…90 °C
Logistical informations
Country of originDE
Main
Range compatibilityLexium 32; Lexium SD3; Lexium 62; Lexium ILS; Lexium 62 ILM; Lexium 52; Lexium 32i; Lexium 28
Gear box typeStraight teeth
Product or component typePlanetary gearbox
Device short nameGBX
Product compatibilityBMI (70 mm, 2 motor stacks); BMI (70 mm, 3 motor stacks); BMH (100 mm, 1 motor stacks); BMH (100 mm, 2 motor stacks); BMH (100 mm, 3 motor stacks); BSH (100 mm, 1 motor stacks); BSH (100 mm, 2 motor stacks); BSH (100 mm, 3 motor stacks); BRS3; ILS (85 mm, 1 motor stacks); ILS (85 mm, 2 motor stacks); ILS (85 mm, 3 motor stacks); BCH2 (80 mm, 1 motor stacks); BCH2 (80 mm, 2 motor stacks); SH3; MH3; ILM
Gearbox external diameter80 mm
Reduction ratio3:1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.0 cm
Package 1 Width10.7 cm
Package 1 Length16.5 cm
Package 1 Weight1.914 kg
Unit Type of Package 2S03
Number of Units in Package 25
Package 2 Height30.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight10.065 kg
The product GBX080003K from Schneider Electric is a planetary gear unit with straight gearing, specifically developed for combination with Lexium servo motors. It serves to adapt speeds and torques in servo applications, ensuring high precision and minimal mechanical backlash. The gear unit features a housing diameter of 80 mm and a gear ratio of 3:1, making it suitable for applications requiring moderate reduction. The design is intended for easy installation and risk-free commissioning, with the connection to Lexium motors enabling direct and reliable integration.

Applications

The planetary gear unit GBX080003K is used in industrial applications where precise and reliable torque transmission is required. It is compatible with a wide range of Lexium servo motors, including the models Lexium 32, Lexium SD3, Lexium 62, Lexium ILS, Lexium 62 ILM, Lexium 52, Lexium 32i, and Lexium 28. The gear units are also suitable for various motor stack configurations, including BMI (70 mm, 2 and 3 motor stacks), BMH (100 mm, 1, 2 and 3 motor stacks), BSH (100 mm, 1, 2 and 3 motor stacks), BRS3, ILS (85 mm, 1, 2 and 3 motor stacks), BCH2 (80 mm, 1 and 2 motor stacks), SH3, MH3, and ILM. Application areas include machine building, automation technology, and precise positioning tasks in manufacturing technology.

Features and Equipment in Detail

The gear unit is equipped with a shaft featuring a keyway, ensuring a secure mechanical connection to the connected motor or tool. The lifetime lubrication ensures maintenance-free operation throughout the entire service life of the device, reducing maintenance costs and downtime. The torsional stiffness is 6 Nm/arcmin, enabling high mechanical stiffness and thus precise motion guidance. The maximum torsional backlash is 7 arc.min, suitable for applications with high accuracy requirements. The maximum radial force is 650 N and the maximum axial force is 1200 N, each at 100 rpm and an operating temperature of 30 °C, describing the load capacity under realistic operating conditions.

Technology Explained Simply

The straight gearing of the gear unit ensures efficient and quiet torque transmission. The efficiency is 97.0 %, indicating high energy efficiency and low power loss. The continuous torque is 85 Nm at 100 rpm and 30 °C, while the peak torque reaches 136 Nm. The moment of inertia of 0.455 kg.cm² influences the acceleration and braking behavior of the drive. The running torque without load is 0.1 Nm, indicating low friction and thus efficient motion guidance. The service life is 30,000 hours at 100 rpm and 30 °C, indicating high reliability and longevity under normal operating conditions.

Compatibility and Accessories

The gear unit is specifically designed for use with Lexium servo motors and can be combined with various models, such as BCH2LF0733CA5C, BCH2LF0433CA5C, BCH2LF0732CA5C, BCH2LF0433CF5C, BCH2LF0432CA5C, BCH2LF0732CF5C, BCH2LF0733CF5C, BCH2LF0432CF5C, and BCH2LF0431CA5C. These motors vary in power, design (with or without oil seal, with or without brake) and connection type (keyway or smooth). The combination with these motors enables flexible adaptation to different drive requirements. Additionally, the KIT GBX-GBY80 BSH-BMH1001-3 is available as suitable accessory, representing a complete drive unit for specific motor stack configurations.

Mounting and Installation

Mounting the gear unit is simple and quick due to standardized interfaces and the keyway shaft. The mounting position is arbitrary, enabling flexible placement in machine building. The IP54 protection rating at the shaft output protects against dust and splashing water, enabling use in industrial environments with moderate environmental conditions. The noise level is 60 dB at 1 m distance and no load, indicating quiet operation. The ambient temperature for operation ranges from -25 °C to 90 °C, enabling broad applicability in various climatic conditions.

Operational Advantages

The combination of high torsional stiffness, low torsional backlash, and lifetime lubrication ensures precise, reliable, and maintenance-free operation. The high energy efficiency, with an efficiency of 97.0 %, reduces energy consumption and operating costs. The long service life of 30,000 hours at 100 rpm and 30 °C minimizes maintenance and replacement intervals. Compatibility with a wide range of Lexium motors and motor stack configurations offers flexibility in system design. Mounting is simple and requires no special tools, accelerating commissioning and reducing error susceptibility.

Housing and Materials

The housing is made of anodized aluminum in black, offering high corrosion resistance and mechanical stability. The output shaft is made of C 45 steel, ensuring high strength and wear resistance. The product weight is 2.1 kg, representing a compact and easy-to-mount unit. The internal length of the gear unit is 72.0 mm, and the input diameter is 19.0 mm, enabling mechanical connection to compatible motors.

Operating Conditions

The gear unit is designed for operating temperatures from -25 °C to 90 °C, enabling broad applicability in various industrial environments. The IP54 protection rating at the shaft output protects against dust and splashing water, enabling use in environments with moderate contamination risk. The maximum radial force of 650 N and maximum axial force of 1200 N at 100 rpm and 30 °C describe the mechanical load capacity under realistic operating conditions. The service life of 30,000 hours at 100 rpm and 30 °C underscores the longevity of the product.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/510163
qrcode für Schneider Electric GBX080003K gear PLE080 I=3