| Additional features |
| Control type | Toggle switch |
| Mounting mode | Fixed |
| Mounting bracket | Rear panel |
| Connection on top side | front side |
| Connection on underside | front side |
| Mechanical life | 10000 cycles |
| Terminal pitch | 35 mm |
| Local signalling | Function indicator |
| Neutral conductor protection setting | Without protection |
| Earth fault protection | None |
| Height | 165 mm |
| Width | 105 mm |
| Depth | 60 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | EasyPact |
| Product or component type | Power-cut-out switch |
| Device short name | Easypact EZC250H |
| Power switch designation | Easypact EZC250H |
| Device application | Distribution |
| Pole description | 3P |
| Description of protected poles | 3t |
| Type of network | DC; AC |
| Network frequency | 50/60 Hz |
| [In] Rated current | 150 A at 40 °C |
| [Ui] Rated insulation voltage | 690 V AC 50/60 Hz complies with IEC 60947-2 |
| [Uimp] Rated impulse voltage withstand | 6 kV corresponds to IEC 60947-2 |
| [Ue] Rated operational voltage | 550 V AC 50/60 Hz complies with IEC 60947-2; 250 V DC complies with IEC 60947-2 |
| Breaking capacity | H |
| [Ics] Rated operational breaking capacity | 5 kA at 550 V AC 50/60 Hz corresponds to IEC 60947-2; 15 kA at 125 V DC corresponds to IEC 60947-2; 15 kA at 250 V DC corresponds to IEC 60947-2; 18 kA at 380 V AC 50/60 Hz corresponds to IEC 60947-2; 18 kA at 400/415 V AC 50/60 Hz corresponds to IEC 60947-2; 12.5 kA at 440 V AC 50/60 Hz corresponds to IEC 60947-2; 42.5 kA at 110/130 V AC 50/60 Hz corresponds to IEC 60947-2; 42.5 kA at 220/230/240 V AC 50/60 Hz corresponds to IEC 60947-2 |
| Suitability for insulation | Yes, complies with IEC 60947-2 |
| Application category | Category A |
| Trigger name | TM-D |
| Trigger technology | Thermal-magnetic |
| Trigger power | 150 A at 50 °C |
| Degree of protection | Overload protection; short-circuit protection |
| Pollution degree | 3 corresponds to IEC 60664-1; 3 corresponds to IEC 947-1 |
| Mounting |
| Standards | GB/T 14048,2; EN/IEC 60947-2; EN/IEC 60947-1; JIS C8201-2-2 |
| Degree of protection (IP) | IP20 complies with IEC 60529 |
| Degree of protection (IK) | IK07 corresponds to IEC 62262 |
| Operating ambient temperature | -25…70 °C |
| Ambient temperature during storage | -35…85 °C |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 11,400 cm |
| VPE 1 width | 11,300 cm |
| VPE 1 length | 18,000 cm |
| Packaging weight (Lbs) | 1,640 kg |
| VPE 2 type | S03 |
| VPE 2 quantity | 8 |
| VPE 2 height | 30,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 13,607 kg |
Dies ist ein 150 A Leistungsschalter für EasyPact EZC250H. Dieses Produkt kann unterhalb der Nennbetriebsspannung (Ue) von 550 VAC bei 50/60 Hz oder 250 VDC Netzbetrieb betrieben werden. Das Ausschaltvermögen (Icu) wird je nach Zustand des Netzwerks unterschiedlich angezeigt. Bei Bedarf muss Ics gleich 50 % Icu entsprechen. Diese Produktversion verfügt über einen 3-poligen Rahmen mit Erkennung an 3 Polen und ist mit einer TMD-Auslöseeinheit für thermomagnetischen Schutz ausgestattet. Es entspricht der Norm IEC60947, der CE-Zertifizierung und einigen unabhängigen Labors (KEMA, ASEFA, TÜV) oder Drittanbietern wie Tilva. Dieses Gerät ist für den Betrieb in Umgebungen der Verschmutzungsgradklasse III entsprechend IEC60947 zertifiziert und hat die Prüfung unter extremen atmosphärischen Bedingungen bestanden. Das Gerät kann vertikal oder horizontal in einem Metallgehäuse montiert und durch Vorhängeschlösser gegen Sicherheitsrisiken gesichert werden. Die Schutzart beträgt IP40 für den direkten Drehgriff und IP54 für den verlängerten Drehgriff. Diese Serie verfügt über Steckplätze, die je nach Einbauort im Gerät hinter der Frontabdeckung des Leistungsschalters zur Anzeige oder zur Positionierung von Hilfsvorrichtungen zur Spannungsfreischaltung dienen. Die festen Abmessungen betragen 105 mm (Breite), 165 mm (Höhe) und 60 mm (Tiefe).