Schneider Electric EZC100H3100, EAN: 3303430301295

Schneider Electric EZC100H3100 power switch 3-pole 100A

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Schneider Electric EZC100H3100 power switch 3-pole 100A

Lieske Part No. 599566
Mfg Part No EZC100H3100
EAN-Code 3303430301295
Manufacturer Schneider Electric
Here only 326,12 EUR
388,08 EUR incl. VAT

Further information for Schneider Electric EZC100H3100 power switch 3-pole 100A

Additional features
Control typeToggle switch
Mounting modeFixed
Mounting bracketRear panel
Connection on top sidefront side
Connection on undersidefront side
Mechanical life13000 cycles
Terminal pitch25 mm
Local signallingFunction indicator
Neutral conductor protection settingWithout protection
Earth fault protectionNone
Height130 mm
Width75 mm
Depth60 mm
Contractual warranty
Warranty (in months)18
Main features
Product seriesEasyPact
Product or component typePower-cut-out switch
Device short nameEasypact EZC100H
Power switch designationEasypact EZC100H
Device applicationDistribution
Pole description3P
Description of protected poles3t
Type of networkDC; AC
Network frequency50/60 Hz
[In] Rated current100 A at 40 °C
[Ui] Rated insulation voltage690 V AC 50/60 Hz complies with IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to IEC 60947-2
[Ue] Rated operational voltage550 V AC 50/60 Hz complies with IEC 60947-2; 250 V DC complies with IEC 60947-2
Breaking capacityH
[Ics] Rated operational breaking capacity15 kA at 380 V AC 50/60 Hz corresponds to IEC 60947-2; 5 kA at 125 V DC corresponds to IEC 60947-2; 5 kA at 250 V DC corresponds to IEC 60947-2; 50 kA at 110/130 V AC 50/60 Hz corresponds to IEC 60947-2; 50 kA at 220/230/240 V AC 50/60 Hz corresponds to IEC 60947-2; 5 kA at 440 V AC 50/60 Hz corresponds to IEC 60947-2; 2.5 kA at 550 V AC 50/60 Hz corresponds to IEC 60947-2; 7.5 kA at 400/415 V AC 50/60 Hz corresponds to IEC 60947-2
Suitability for insulationYes, complies with IEC 60947-2
Application categoryCategory A
Trigger nameTM-D
Trigger technologyThermal-magnetic
Trigger power100 A at 50 °C
Degree of protectionShort-circuit protection; overload protection
Pollution degree3 corresponds to IEC 60664-1; 3 corresponds to IEC 947-1
Mounting
StandardsGB/T 14048.2; JIS C8201-2-2; EN/IEC 60947-1; EN/IEC 60947-2
Degree of protection (IP)IP20 complies with IEC 60529
Degree of protection (IK)IK07 corresponds to IEC 62262
Operating ambient temperature-25…70 °C
Ambient temperature during storage-35…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height9,5 cm
VPE 1 width8,5 cm
VPE 1 length14,0 cm
Packaging weight (Lbs)839,0 g
VPE 2 typeS02
VPE 2 quantity12
VPE 2 height15,0 cm
VPE 2 width30,0 cm
VPE 2 length40,0 cm
VPE 2 weight10,12 kg
VPE 3 typeP12
VPE 3 quantity192
VPE 3 height80,0 cm
VPE 3 width80,0 cm
VPE 3 length120,0 cm
VPE 3 weight175,568 kg
The power circuit breaker Easypact EZC100H from Schneider Electric is a 3-pole fixed power circuit breaker designed for use in electrical low-voltage installations. It is used for the distribution and protection of electrical circuits in industrial facilities as well as in buildings. The device is part of the EasyPact product series and features a thermal-magnetic trip unit (TM-D), providing both overload protection and short-circuit protection. The rated current is 100 A at 40 °C, with the trip unit also covering 100 A at 50 °C. The rated operational voltage is 550 V AC 50/60 Hz and 250 V DC, while the rated insulation voltage is 690 V AC. The rated impulse voltage withstand is specified as 6 kV, enabling use in environments with transient voltage surges.

Applications include standard industrial uses such as machine controls, drives, and distribution systems, as well as building applications for electrical energy distribution. The circuit breaker is designed for network frequencies of 50/60 Hz and complies with international standards IEC 60947-1 and IEC 60947-2, ensuring reliability and interoperability. The usage category is Category A, indicating suitability for applications with low load fluctuation. The protection rating IP20 according to IEC 60529 protects against finger contact and larger solid objects, while the protection rating IK07 according to IEC 62262 provides protection against mechanical impacts such as shocks and vibrations.

Functions and equipment in detail include a toggle switch as the control type and a function indicator for local signaling of the operating status. The mechanical life is 13,000 cycles, indicating high operational reliability and durability. The connection pitch is 25 mm, and the terminals are located on the front side, both at the top and bottom. The dimensions are 75 mm (width) × 130 mm (height) × 60 mm (depth), allowing the circuit breaker to be mounted in standard switchboards with 25 mm pitch. Mounting is fixed to the rear wall.

Technology explained simply shows that the thermal-magnetic trip unit combines two protection functions: the thermal part responds to sustained overloads by heat, while the magnetic part trips immediately in case of sudden short circuits. The interrupting capacity (H) is defined for various voltage ranges, for example 7.5 kA at 400/415 V AC 50/60 Hz, ensuring suitability for industrial distribution systems. The rated operational interrupting capacity (Ics) is specified for various voltages, achieving for example 50 kA at 220/230/240 V AC 50/60 Hz. The pollution degree class 3 according to IEC 60664-1 and IEC 947-1 indicates suitability for environments with increased pollution risk.

Compatibility and accessories include various extensions available for the Easypact EZC100H. These include for example the EZAROTE rotary drive with door coupling, the EZATSHD3P terminal cover, the EZAUVR200AC U-coil 200-240 VAC, the EZASPDR3P connection expansion 3-pole, the EZASHT200AC SHT load current trip unit, as well as various EZAUX signaling components such as EZAUX10 AX1 NO/NC and EZAUX11 AL AX2 NO/NC. These components allow adaptation to specific requirements such as remote control, additional signaling, or enhanced protection functions.

Mounting and installation are performed by fixed attachment to the rear wall of the switchboard. The front side is designed for connections, with terminals accessible at the top and bottom. The ambient temperature during operation ranges from -25 °C to 70 °C, and during storage from -35 °C to 85 °C, enabling broad applicability in various climatic conditions. The packaging unit contains a single device (PCE), with the packaging weight specified as 839 g.

Operational advantages lie in the combination of robust design, high service life, clear signaling, and the ability to extend the device with various accessories. Compliance with international standards such as IEC 60947-2 and UL 508, as well as certifications for shipping, underline reliability and global applicability. The warranty is 18 months.

Protection rating IP20 and IK07 ensure sufficient protection against mechanical impacts and contact, with the IP20 class suitable for indoor use. The rated operational voltage of 550 V AC and 250 V DC covers a wide range of applications, including industrial and stationary installations. The rated impulse voltage withstand of 6 kV enables use in environments with transient voltage surges. The mechanical life of 13,000 cycles demonstrates the device’s durability under normal operating conditions. The connection pitch of 25 mm allows standard mounting in switchboards. The function indicator provides visual feedback on the operating status. The suitability for isolation according to IEC 60947-2 ensures electrical separation in case of fault. The usage category A is intended for installations with low load fluctuation. The rated operational interrupting capacity (Ics) is defined for various voltage ranges, achieving for example 7.5 kA at 400/415 V AC 50/60 Hz. The pollution degree class 3 according to IEC 60664-1 and IEC 947-1 indicates suitability for polluted environments. The ambient temperature during operation ranges from -25 °C to 70 °C, and during storage from -35 °C to 85 °C. The packaging unit contains one device (PCE), with the packaging weight being 839 g. The warranty is 18 months.

Accessories such as the EZAROTE rotary drive, the EZATSHD3P terminal cover, the EZAUVR200AC U-coil, the EZASPDR3P connection expansion, the EZASHT200AC SHT load current trip unit, as well as the EZAUX signaling components enable adaptation to specific requirements such as remote control, additional signaling, or enhanced protection functions. These components are available for the Easypact EZC100H and can be added depending on the application.

In summary, the Easypact EZC100H is a reliable, versatile power circuit breaker with a thermal-magnetic trip unit, designed for standard applications in industry and buildings. It offers clear signaling, high service life, broad applicability across various voltage ranges, and is expandable with a wide range of accessories. Compliance with international standards and certifications underscores the quality and safety of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/599566
qrcode für Schneider Electric EZC100H3100 power switch 3-pole 100A