| Additional features |
| Control type | Toggle switch |
| Mounting mode | Fixed |
| Mounting bracket | Rear panel |
| Connection on top side | front side |
| Connection on underside | front side |
| Mechanical life | 13000 cycles |
| Terminal pitch | 25 mm |
| Local signalling | Function indicator |
| Neutral conductor protection setting | Without protection |
| Earth fault protection | None |
| Height | 130 mm |
| Width | 75 mm |
| Depth | 60 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | EasyPact |
| Product or component type | Power-cut-out switch |
| Device short name | Easypact EZC100F |
| Power switch designation | Easypact EZC100F |
| Device application | Distribution |
| Pole description | 3P |
| Description of protected poles | 3t |
| Type of network | AC; DC |
| Network frequency | 50/60 Hz |
| [In] Rated current | 75 A at 40 °C |
| [Ui] Rated insulation voltage | 690 V AC 50/60 Hz complies with IEC 60947-2 |
| [Uimp] Rated impulse voltage withstand | 6 kV corresponds to IEC 60947-2 |
| [Ue] Rated operational voltage | 550 V AC 50/60 Hz complies with IEC 60947-2; 250 V DC complies with IEC 60947-2 |
| Breaking capacity | F |
| [Ics] Rated operational breaking capacity | 12.5 kA at 110/130 V AC 50/60 Hz corresponds to IEC 60947-2; 12.5 kA at 220/230/240 V AC 50/60 Hz corresponds to IEC 60947-2; 2.5 kA at 125 V DC corresponds to IEC 60947-2; 2.5 kA at 250 V DC corresponds to IEC 60947-2; 2.5 kA at 550 V AC 50/60 Hz corresponds to IEC 60947-2; 5 kA at 380 V AC 50/60 Hz corresponds to IEC 60947-2; 5 kA at 400/415 V AC 50/60 Hz corresponds to IEC 60947-2; 3.75 kA at 440 V AC 50/60 Hz corresponds to IEC 60947-2 |
| Suitability for insulation | Yes, complies with IEC 60947-2 |
| Application category | Category A |
| Trigger name | TM-D |
| Trigger technology | Thermal-magnetic |
| Trigger power | 75 A at 50 °C |
| Degree of protection | Overload protection; short-circuit protection |
| Pollution degree | 3 corresponds to IEC 60664-1; 3 corresponds to IEC 947-1 |
| Mounting |
| Standards | EN/IEC 60947-2; GB/T 14048,2; EN/IEC 60947-1; JIS C8201-2-2 |
| Degree of protection (IP) | IP20 complies with IEC 60529 |
| Degree of protection (IK) | IK07 corresponds to IEC 62262 |
| Operating ambient temperature | -25…70 °C |
| Ambient temperature during storage | -35…85 °C |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 8,000 cm |
| VPE 1 width | 9,000 cm |
| VPE 1 length | 14,000 cm |
| Packaging weight (Lbs) | 785,000 g |
| VPE 2 type | S02 |
| VPE 2 quantity | 12 |
| VPE 2 height | 15,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 9,835 kg |
| VPE 3 type | P06 |
| VPE 3 quantity | 192 |
| VPE 3 height | 75,000 cm |
| VPE 3 width | 80,000 cm |
| VPE 3 length | 60,000 cm |
| VPE 3 weight | 159,220 kg |
The power switch
Easypact EZC100F from
Schneider Electric is a 3-pole (3P) switch of the EasyPact series, designed for distribution in low-voltage installations. It provides protection for electrical installations in industrial and building technical applications and is intended for fixed mounting operation. The device features a thermomagnetic tripping unit of type
TM-D, offering both overload protection and short-circuit protection (instantaneous protection). The rated current is
75 A at 40 °C, with the tripping unit having a nominal rating of 75 A at 50 °C. The operating voltage is
550 V AC 50/60 Hz or
250 V DC, with a rated insulation voltage of 690 V AC. The rated impulse withstand voltage is 6 kV, ensuring suitability for environments with transient voltage surges.
Applications
This power switch is designed for standard applications in industry and building management. It is suitable for protection functions in distribution systems where reliable disconnection is required in case of overload or short-circuit. The usage category A according to IEC 60947-2 specifies that the switch is intended for use in installations with low short-circuit risk. The protection rating
IP20 according to IEC 60529 protects against contact with fingers and against ingress of solid foreign objects larger than 12.5 mm, but not against splashing water or dust. The mechanical life is
13,000 cycles, ensuring high operational reliability over an extended period.
Functions and Equipment in Detail
The switch features
fixed mounting on the rear wall and is equipped with a
toggle switch enabling operation from the front side. Connections are also located on the front side, with a connection pitch of 25 mm. Local signaling is provided by a
function indicator, visually displaying the operating status. Neutral conductor protection is not provided, nor is there an earth fault protection function. Dimensions are 75 mm (width) × 130 mm (height) × 60 mm (depth), enabling compact integration into standard distribution enclosures.
Technology Explained Simply
The thermomagnetic tripping technology combines a thermal and a magnetic tripping element. The thermal part responds to sustained overloads by deforming at elevated temperatures and tripping the switch. The magnetic part reacts immediately to high current surges, such as those occurring during short-circuits, and trips within milliseconds. The breaking capacity (Ics) varies depending on voltage: 5 kA at 400/415 V AC, 2.5 kA at 550 V AC, and 2.5 kA at 250 V DC. The protection rating
IK07 according to IEC 62262 protects against mechanical impacts such as light shocks or blows, enhancing safety in industrial environments.
Compatibility and Accessories
The power switch is compatible with various accessories that extend its functionality. These include, for example, the
load current tripping unit EZASHT200AC, the
rotary drive EZAROTDS for rotating the handle, and
connection extensions EZASPDR3P for larger cross-sections. Other options include
terminal covers EZATSHD3P,
frame terminals EZALUG1003 for cross-sections of 10–50 mm², and
U-coils EZAUVR200AC for remote control. These components allow adaptation to specific requirements such as remote operation, enhanced safety, or improved accessibility.
Mounting and Installation
Mounting is fixed to the rear wall of a distribution board. The front side is designed for operation and connection. The ambient temperature during operation ranges from -25 °C to 70 °C, while storage temperature ranges from -35 °C to 85 °C. Compliance with standards
EN/IEC 60947-1, -2 and
GB/T 14048.2 ensures conformity with international standards. Installation and maintenance must only be carried out by qualified personnel, observing safety regulations such as NFPA 70E or CSA Z462.
Operational Advantages
The switch provides reliable protection against overload and short-circuit, supported by a long mechanical life and clear visual indication of the operating status. Compatibility with various accessories allows flexible adaptation to different requirements. Compliance with international standards and approval for marine applications underline the quality and reliability of the device. The operating voltage of 550 V AC and insulation strength of 690 V AC make it suitable for a wide range of applications, particularly in industrial environments with high electrical loads.