| Additional features |
| Control type | Toggle switch |
| Mounting mode | Fixed |
| Mounting bracket | Rear panel |
| Connection on top side | front side |
| Connection on underside | front side |
| Mechanical life | 13000 cycles |
| Terminal pitch | 25 mm |
| Local signalling | Function indicator |
| Neutral conductor protection setting | Without protection |
| Earth fault protection | None |
| Height | 130 mm |
| Width | 75 mm |
| Depth | 60 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | EasyPact |
| Product or component type | Power-cut-out switch |
| Device short name | Easypact EZC100B |
| Power switch designation | Easypact EZC100B |
| Device application | Distribution |
| Pole description | 3P |
| Description of protected poles | 3t |
| Type of network | DC; AC |
| Network frequency | 50/60 Hz |
| [In] Rated current | 15 A at 40 °C |
| [Ui] Rated insulation voltage | 690 V AC 50/60 Hz complies with IEC 60947-2 |
| [Uimp] Rated impulse voltage withstand | 6 kV corresponds to IEC 60947-2 |
| [Ue] Rated operational voltage | 550 V AC 50/60 Hz corresponds to IEC 60947-2 |
| Breaking capacity | B |
| [Ics] Rated operational breaking capacity | 0.625 kA at 550 V AC 50/60 Hz corresponds to IEC 60947-2; 1.25 kA at 440 V AC 50/60 Hz corresponds to IEC 60947-2; 1.875 kA at 380 V AC 50/60 Hz corresponds to IEC 60947-2; 1.875 kA at 400/415 V AC 50/60 Hz corresponds to IEC 60947-2; 2.5 kA at 110/130 V AC 50/60 Hz corresponds to IEC 60947-2; 2.5 kA at 220/230/240 V AC 50/60 Hz corresponds to IEC 60947-2 |
| Suitability for insulation | Yes, complies with IEC 60947-2 |
| Application category | Category A |
| Trigger name | TM-D |
| Trigger technology | Thermal-magnetic |
| Trigger power | 15 A at 50 °C |
| Degree of protection | Overload protection; short-circuit protection |
| Pollution degree | 3 corresponds to IEC 60664-1; 3 corresponds to IEC 947-1 |
| Mounting |
| Standards | EN/IEC 60947-2; JIS C8201-2-2; EN/IEC 60947-1; GB/T 14048.2 |
| Degree of protection (IP) | IP20 complies with IEC 60529 |
| Degree of protection (IK) | IK07 corresponds to IEC 62262 |
| Operating ambient temperature | -25…70 °C |
| Ambient temperature during storage | -35…85 °C |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 10,000 cm |
| VPE 1 width | 8,000 cm |
| VPE 1 length | 14,000 cm |
| Packaging weight (Lbs) | 797,000 g |
| VPE 2 type | S02 |
| VPE 2 quantity | 12 |
| VPE 2 height | 15,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 9,960 kg |
| VPE 3 type | P06 |
| VPE 3 quantity | 192 |
| VPE 3 height | 75,000 cm |
| VPE 3 width | 80,000 cm |
| VPE 3 length | 60,000 cm |
| VPE 3 weight | 167,092 kg |
Dies ist ein 15 A Leistungsschalter für EasyPact EZC100B. Dieses Produkt kann unterhalb der Nennbetriebsspannung (Ue) von 550 VAC bei 50/60 Hz betrieben werden. Das Ausschaltvermögen (Icu) wird je nach Zustand des Netzwerks unterschiedlich angezeigt. Bei Bedarf muss Ics gleich 25 % Icu entsprechen. Diese Produktversion verfügt über einen 3-poligen Rahmen mit Erkennung an 3 Polen und ist mit einer TMD-Auslöseeinheit für thermomagnetischen Schutz ausgestattet. Es entspricht der Norm IEC60947, der CE-Zertifizierung und einigen unabhängigen Labors (KEMA, ASEFA, TÜV) oder Drittanbietern wie Tilva. Dieses Gerät ist für den Betrieb in Umgebungen der Verschmutzungsgradklasse III entsprechend IEC60947 zertifiziert und hat die Prüfung unter extremen atmosphärischen Bedingungen bestanden. Das Gerät kann vertikal oder horizontal in einem Metallgehäuse montiert und durch Vorhängeschlösser gegen Sicherheitsrisiken gesichert werden. Die Schutzart beträgt IP40 für den direkten Drehgriff und IP54 für den verlängerten Drehgriff. Diese Serie verfügt über Steckplätze, die je nach Einbauort im Gerät hinter der Frontabdeckung des Leistungsschalters zur Anzeige oder zur Positionierung von Hilfsvorrichtungen zur Spannungsfreischaltung dienen. Die festen Abmessungen betragen 75 mm (Breite), 130 mm (Höhe) und 60 mm (Tiefe).