| Additional features |
| Type of auxiliary contacts | Standard |
| [Ith] conventional thermal current in free air | 5 A |
| [Ie] Rated operational current | AC-12: 3 A at 250 V AC 50/60 Hz; AC-12: 5 A at 125 V AC 50/60 Hz; AC-12: 5 A at 24 V AC 50/60 Hz; AC-12: 5 A at 48 V AC 50/60 Hz; AC-15: 2 A at 250 V AC 50/60 Hz; AC-15: 3 A at 125 V AC 50/60 Hz; AC-15: 5 A at 24 V AC 50/60 Hz; AC-15: 5 A at 48 V AC 50/60 Hz; DC-12: 0.2 A at 250 V DC; DC-12: 0.4 A at 125 V DC; DC-12: 2.5 A at 48 V DC; DC-12: 4 A at 24 V DC; DC-14: 0.2 A at 250 V DC; DC-14: 0.4 A at 125 V DC; DC-14: 1 A at 48 V DC; DC-14: 3 A at 24 V DC |
| Minimum load | 10 mA at 24 V |
| Auxiliary terminal clamp | Lead wire |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | EasyPact EZC; EasyPacT CVS; GoPact R MCCB |
| Device short name | EZC100; CVS100BS; GR12T |
| Product or component type | Switch |
| Device application | Signaling; alarm |
| Compatible product family | EasyPacT EasyPact EZC EZC100 circuit breaker; EasyPacT EasyPacT CVS CVS100BS; GoPact R MCCB GR12T |
| Signal contact composition | 2 normally open contacts/normally closed contacts |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 2,54 cm |
| VPE 1 width | 7,11 cm |
| VPE 1 length | 8,38 cm |
| Packaging weight (Lbs) | 0,06 kg |
This composition is an auxiliary and alarm switch (AL+AX) as part of the signaling contact for the EasyPact EZC100 circuit breaker. This AL+AX can indicate whether the circuit breaker has been tripped or not and the contact status due to a fault. It is used for indicators, electrical interlock, relay, etc. These electrical auxiliaries are locked in one place when the front cover is opened.