Additional features
Compatible product family	EVlink EcoStruxure EV Charging Expert; EVlink EVlink Pro AC Metal; EcoStruxure EcoStruxure EV Advisor
Installation type	Indoor; Outdoor
Supplied equipment	1 residual current circuit breaker (RCD) integrated; 1 MNx auxiliary contact integrated; 1 energy meter
Accuracy class of energy meter	Class 1
Protection device type	Residual current device (RCD) Type B-EV (electric vehicle)
Pole description	3P + N for circuit; 1P + N for circuit
Mounting mode	Wall mounting; wall mounting (construction kit housing); floor-standing (stela); floor-standing (construction kit housing)
Mounting bracket	Stele, to be ordered separately; enclosure kit, to be ordered separately
Cable entry	Lower entry; cable entry from top; cable entry from rear
[UH,nom] Rated operating voltage	380 - 415 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz
Rated output power	22 kW 32 A 380 - 415 V
Number of socket outlets	2
Output type	Front side T2 with cover socket / silver-plated contacts; front side TF socket
Authentication system	RFID tag compliant with ISO/IEC 14443 A and B; RFID tag compliant with ISO/IEC 15693; NFC tag; Free access
RFID-compatible technology	MIFARE Classic; MIFARE Ultralight; MIFARE Plus
NFC frequency	13.56 MHz
NFC tag type	Type 1; Type 2; Type 4; Type 5
Earthing system	TT; TN-S; TN-C-S; IT (single phase network only allowed, 400V 3 phases network forbidden)
Operating conditions	Single phase distribution or 3x230VAC (ph-ph) distribution forbidden
Number of inputs	3
Input type	Binary for charging power reduction normally open contact; Binary for delayed charging normally open contact; Binary for vehicle detection normally open contact
Type of excitation	Can be controlled decentralised
Local signalling	1 green LED strip, function: available; 1 blue LED strip, function: charging; 1 red LED strip, function: fault indication
Standards	EN/IEC 61851-1:Ed. 3; EN/IEC 62196-1:Ed. 2; EN/IEC 62196-2:Ed. 1; EN 61000-6-2:2019; EN 61000-6-3:2007; EN 61000-6-3:2011/A1; IEC 60884-1; NF C 61314; ISO 15118
Usage condition	To be ordered separately
Product certifications	EV Ready; CE
Installation height	2,000 m without derating
Height	529 mm
Width	317 mm
Depth	158 mm
Product weight	7,2 kg
Colour	Front: white (RAL 9003); Housing: dark grey (RAL 7016); Rear: black (RAL 9005)
Contractual warranty
Warranty (in months)	24
Main features
Product series	EVlink
Product name	EVlink Pro AC
Product or component type	Charging station
Device short name	EVB3
Communication network type	Ethernet; Bluetooth; 3G/4G modem optional; Modbus TCP
Connector type	2 RJ45 for Ethernet LAN connection
Communications protocol	OCPP 1.6
Communication service	JSON Smart Charging for OCPP 1.6
Operating mode	Cluster architecture; island operation
Function available	Diagnostics functions; charging status; charging management
Mounting
Degree of protection (IP)	IP54
Degree of protection (IK)	IK10
Operating ambient temperature	-30…50 °C
Ambient temperature during storage	-40…80 °C
Relative humidity	5…95 %
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	28,500 cm
VPE 1 width	36,000 cm
VPE 1 length	57,500 cm
Packaging weight (Lbs)	8,948 kg
VPE 2 type	P06
VPE 2 quantity	4
VPE 2 height	72,000 cm
VPE 2 width	60,000 cm
VPE 2 length	80,000 cm
VPE 2 weight	41,000 kg

EVlink Pro AC wallbox with type 2 socket with shutters and type F Schuko socket. For use in semi-public garages or parking lots, for indoor or outdoor installation on the wall, on the EVlink stele (EVA1PBS1 / EVA1PBS2) or in the metal kit (EVA1RWKS1 / EVA1RFKS1 / EVA1RFKS2). Mode 3 charging according to IEC 61851-1, 3-phase with a maximum charging power of 22 kW, type 2 socket, type F Schuko socket up to 2.3 kW 1-phase. With integrated FI type B-EV and iMNx undervoltage release for shutdown in the event of contact welding in accordance with EV Ready requirements. Digital inputs: 1 for temporary current limitation, 1 for postponed/suspended charging, 1 for EV presence detection. Access controller via NFC / RFID reader. NFC reader 13.56 MHz compatible with type 1, 2, 4 and 5 badges, RFID reader: Complies with the protocols ISO/CEI 14443 A &, B and ISO/CEI 15693, Compatible with Mifare Ultralight, Mifare Classic, Mifare Plus. User information and status message via a clearly visible LED arch, commissioning of the wallbox via eSetup app via Bluetooth. Communication standards: Bluetooth, Ethernet 2 connections (1 for daisy chain), Modbus serial, Modbus TCP, OCPP 1.6J for connection to a backend and the load management system EcoStruxure EV Charging Expert. Optional accessories: WiFi module (EVA1MW), modem module (EVA1MM), ISO 15118 module (EVA1M8), can be plugged into the charging controller. Color of the charging station: Body: dark gray RAL 7016 and black RAL 9005, front cover: white RAL 9003. Dimensions WxHxD: 317x529x158mm, weight: 7.5 kg, material: UV-treated polycarbonate. Shock resistance IK10, protection class IP54, operating temperature -30 to 50°C, storage temperature -40 to 80°C, operating altitude max. 2000m without derating, relative humidity 5 to 95%, own consumption up to 10W. Earthing system: TT, TN(S) or TN(C)(S), IT compatible with additional isolation transformer in the power supply. Norms and standards: CE, EV Ready, IEC/EN 61851-1 Ed 3.0, IEC/EN 62196-1 Ed 2.0, IEC/EN 62196-2 Ed 1.0, EN 61000-6-2: 2019, EN 61000-6-3:2007 + A1:2011, IEC 60884-1 and NF-C 61314.