Schneider Electric CAD32T7, EAN: 3389110402360

Schneider Electric CAD32T7 auxiliary contactor 3S+2Ö 480 V

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric CAD32T7 auxiliary contactor 3S+2Ö 480 V

Lieske Part No. 363965
Mfg Part No CAD32T7
EAN-Code 3389110402360
Manufacturer Schneider Electric
Here only 62,28 EUR
74,11 EUR incl. VAT

Further information for Schneider Electric CAD32T7 auxiliary contactor 3S+2Ö 480 V

Complementary
Utilisation categoryDC-13; AC-15; AC-14
Pole contact composition3 NO + 2 NC
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage480 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
[Ith] conventional free air thermal current10 A (at 60 °C)
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
[Icw] rated short-time withstand current100 A - 1 s; 120 A - 500 ms; 140 A - 100 ms
Associated fuse rating10 A gG conforming to IEC 60947-5-1
[Ui] rated insulation voltage600 V UL certified; 600 V CSA certified; 690 V conforming to IEC 60947-5-1
Mounting supportPlate; Rail
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Tightening torque1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2; 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm; 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2
Control circuit voltage limits0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz; 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
Operating time12...22 ms coil energisation and NO closing; 4...12 ms coil de-energisation and NO opening; 4...19 ms coil energisation and NC opening; 6...17 ms coil de-energisation and NC closing
Mechanical durability30 Mcycles
Maximum operating rate180 cyc/mn
Inrush power in VA70 VA 50 Hz (at 20 °C)
Hold-in power consumption in VA8 VA 50 Hz (at 20 °C)
Minimum switching voltage17 V
Minimum switching current5 mA
Non-overlap time1.5 ms on energisation between NC and NO contact; 1.5 ms on de-energisation between NC and NO contact
Insulation resistance> 10 MOhm
Mechanical robustnessShocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27; Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27; Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6; Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6
Height77 mm
Width45 mm
Depth84 mm
Net weight0.58 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 60947-5-1; GB/T 14048.5; UL 60947-5-1; CSA C22.2 No 60947-5-1; JIS C8201-5-1
Product certificationsCB; CCC; UL; CSA; EAC; CE; UKCA
IP degree of protectionIP2X front face conforming to VDE 0106
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for operation-40…60 °C; 60…70 °C with derating
Ambient air temperature for storage-60…80 °C
Operating altitude0...3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys CAD
Product or component typeControl relay
Device short nameCAD
Contactor applicationControl circuit
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.200 cm
Package 1 Width9.200 cm
Package 1 Length11.200 cm
Package 1 Weight349.000 g
Unit Type of Package 2S02
Number of Units in Package 220
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight7.236 kg
The control relay CAD32T7 from the TeSys Deca series by Schneider Electric is an auxiliary contactor designed for use in control circuits. It features a 480 V AC 50/60 Hz coil and is rated for usage categories AC-15, AC-14, and DC-13. The device provides a contact configuration of 3 normally open (NO) and 2 normally closed (NC) contacts, making it suitable for various control tasks in industrial applications. The screw terminals allow connection with flexible and rigid cables in cross-sections from 1 to 4 mm², with flexible cables with wire end ferrules permitting a cross-section of 1 to 2.5 mm². Mounting is possible either on a plate or on a rail, enabling flexible integration into existing control panels.

Applications include controlling auxiliary functions in industrial drives, such as signal transmission, feedback of switching states, or interconnection of control circuits. The relay is designed for demanding operating conditions, especially at high switching frequencies. The maximum operating rate is 180 cycles per minute, corresponding to a total life expectancy of 30 million switching cycles. Mechanical robustness is ensured by vibration and shock resistance according to IEC 60068-2-6 and IEC 60068-2-27, with the device exhibiting up to 15 Gn shock resistance in the closed state.

Functions and equipment in detail include high insulation strength with a rated impulse withstand voltage of 6 kV as per IEC 60947. The rated insulation voltage is 690 V according to IEC 60947-5-1, supplemented by certifications for 600 V UL and CSA. The rated make capacity is 140 A for AC and 250 A for DC, with the associated fuse protection specified as 10 A gG. The operating time for coil energization and NO contact closing is 12 to 22 ms, while de-energization of the coil and NC contact closing takes 6 to 17 ms. The non-overlapping time between NO and NC contacts is 1.5 ms, ensuring safe switching operations.

Technology explained simply shows that the relay operates with an AC coil at 480 V operating voltage. The pickup power is 70 VA at 50 Hz and the holding power consumption is 8 VA, ensuring efficient energy use. The minimum switching voltage is 17 V and the minimum switching current is 5 mA, ensuring reliability even with weak signals. The insulation resistance exceeds 10 MΩ, providing high electrical safety. The ambient temperature during operation ranges from -40 °C to 60 °C, with performance reduction required at temperatures from 60 to 70 °C. The operating altitude is up to 3,000 m above sea level.

Compatibility and accessories include a variety of extensions suitable for adapting to specific requirements. These include auxiliary switch blocks such as LAD8N11 (1S+1Oe), LADN20 (2S), LADC22 (2S2Oe), or LADN13 (1S3Oe), providing additional contacts. Time blocks such as LADT2 (0.10–30.00 s) or LADT4 (10.00–180.00 s) enable delayed switching operations. Interlock blocks such as LAD6K10E (42–48 VAC/DC) or LAD6K10F (110–127 VAC/DC) serve mechanical interlocking. Protection covers such as LAD9ET1 or LAD9ET1S offer additional front-side protection. Identification plates such as LA9D92 or LA9D93 facilitate identification.

Mounting and installation is performed by securing to a mounting plate or rail. The screw terminals require a tightening torque of 1.7 Nm, using screwdrivers with Phillips No. 2, flat Ø 6, or position No. 2. Dimensions are 77 mm height, 45 mm width, and 84 mm depth. The product weight is 0.58 kg.

Operational advantages include high mechanical life expectancy, reliability at high switching frequencies, and broad compliance with standards. Certifications include CB, CCC, UL, CSA, EAC, CE, UKCA, as well as compliance with RoHS/REACH. The protection rating IP2x on the front side corresponds to VDE 0106 and protects against finger contact. The coating corresponds to category TH according to IEC 60068, ensuring high resistance to environmental conditions. The operating altitude up to 3,000 m and storage temperature from -60 to 80 °C extend the application range across various climatic and geographic regions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/363965
qrcode für Schneider Electric CAD32T7 auxiliary contactor 3S+2Ö 480 V