Schneider Electric CAD32R7, EAN: 3389110402049

Schneider Electric CAD32R7 contactor 3S2Ö 440 V

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric CAD32R7 contactor 3S2Ö 440 V

Lieske Part No. 566375
Mfg Part No CAD32R7
EAN-Code 3389110402049
Manufacturer Schneider Electric
Here only 62,57 EUR
74,46 EUR incl. VAT

Further information for Schneider Electric CAD32R7 contactor 3S2Ö 440 V

Complementary
Utilisation categoryAC-15; AC-14; DC-13
Pole contact composition3 NO + 2 NC
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage440 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
[Ith] conventional free air thermal current10 A (at 60 °C)
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
[Icw] rated short-time withstand current100 A - 1 s; 120 A - 500 ms; 140 A - 100 ms
Associated fuse rating10 A gG conforming to IEC 60947-5-1
[Ui] rated insulation voltage600 V UL certified; 600 V CSA certified; 690 V conforming to IEC 60947-5-1
Mounting supportRail; Plate
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Tightening torque1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2; 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm; 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2
Control circuit voltage limits0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz; 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
Operating time12...22 ms coil energisation and NO closing; 4...12 ms coil de-energisation and NO opening; 4...19 ms coil energisation and NC opening; 6...17 ms coil de-energisation and NC closing
Mechanical durability30 Mcycles
Maximum operating rate180 cyc/mn
Inrush power in VA70 VA 50 Hz (at 20 °C)
Hold-in power consumption in VA8 VA 50 Hz (at 20 °C)
Minimum switching voltage17 V
Minimum switching current5 mA
Non-overlap time1.5 ms on energisation between NC and NO contact; 1.5 ms on de-energisation between NC and NO contact
Insulation resistance> 10 MOhm
Mechanical robustnessShocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27; Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27; Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6; Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6
Height77 mm
Width45 mm
Depth84 mm
Net weight0.58 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 60947-5-1; GB/T 14048.5; UL 60947-5-1; CSA C22.2 No 60947-5-1; JIS C8201-5-1
Product certificationsCB; CCC; UL; CSA; EAC; CE; UKCA
IP degree of protectionIP2X front face conforming to VDE 0106
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for operation-40…60 °C; 60…70 °C with derating
Ambient air temperature for storage-60…80 °C
Operating altitude0...3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys CAD
Product or component typeControl relay
Device short nameCAD
Contactor applicationControl circuit
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5 cm
Package 1 Width9.2 cm
Package 1 Length11.2 cm
Package 1 Weight350 g
Unit Type of Package 2S02
Number of Units in Package 220
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight7.332 kg
The control relay CAD32R7 from the TeSys Deca series by Schneider Electric is an auxiliary contactor designed for use in control circuits. It features a 440 V AC 50/60 Hz coil and is rated for usage categories AC-15, AC-14, and DC-13. The device provides a contact configuration of 3 normally closed contacts (NO) and 2 normally open contacts (NC), making it suitable for complex control tasks in industrial systems. The screw terminals allow connection with flexible and rigid cables in cross-sections from 1 to 4 mm², with the connection method varying depending on cable type and cross-section. Mounting is possible either on a rail or on a plate, enabling flexible integration into existing control panels.

Applications include controlling auxiliary functions in industrial machines, plant control systems, and applications requiring high operating speeds. The relay is designed for a maximum operating rate of 180 cycles per minute, corresponding to a total mechanical life of 30 million cycles. The rated impulse voltage withstand is 6 kV, ensuring reliability during transient voltage surges. The rated insulation voltage is 690 V according to IEC 60947-5-1, making the device suitable for applications in high-voltage environments. The rated switching capacity is 140 A for AC and 250 A for DC, highlighting its capability for safe switching under load.

Functions and equipment in detail include a conventional thermal current rating of 10 A at 60 °C, ensuring thermal stability under load. The coil power consumption is 70 VA at 50 Hz, while the holding power consumption is 8 VA, enabling efficient energy use. The minimum switching voltage is defined as 17 V and the minimum switching current as 5 mA, ensuring reliability even with weak signals. The non-overlapping time between normally closed and normally open contacts is 1.5 ms, which is important for precise switching in time-critical applications. The operating times are 12–22 ms for coil energization and NO closure, and 4–12 ms for coil de-energization and NO opening, ensuring fast responsiveness.

Technology explained simply indicates that the device is designed for operation in a temperature range of -40 °C to 60 °C, with performance reduction required at temperatures from 60 °C to 70 °C. The operating altitude is limited to 0 to 3,000 m above sea level. Mechanical robustness is confirmed by shock and vibration tests according to IEC 60068-2-27 and IEC 60068-2-6, with the device exhibiting 10 Gn shock resistance in open state and 15 Gn in closed state. The insulation resistance is specified as > 10 MΩ, ensuring high electrical insulation. The coating corresponds to category TH according to IEC 60068, enhancing resistance to environmental influences.

Compatibility and accessories include use with various auxiliary switch blocks such as LADN13 (1S3Ö), LADN22 (2S+2Ö), LADN40 (4S), or LADN10 (1S), which extend the number of contacts. Interlocking blocks such as LAD6K10F (110–127 VAC/DC) or LAD6K10M (220/240 V AC/DC) enable mechanical interlocking with other relays. Time delay blocks such as LADR0 (0.10–3.00 s) or LADR2 (1–30.00 s) allow integration of time delay functions. Protection covers such as LAD9ET1S or LAD9ET1 provide additional protection for contacts. Identification plates LA9D92 and LA9D93 are used for marking terminals.

Mounting and installation is performed using the provided mounting brackets on a rail or plate. The torque values for the screw terminals are 1.7 Nm, and mounting can be done using a Phillips screwdriver No. 2, a flat screwdriver Ø 6, or a positioning screwdriver No. 2. The protection rating is IP2x on the front according to VDE 0106, providing protection against finger contact but not against dust or water. The certifications include CB, CCC, UL, CSA, EAC, CE, UKCA, ensuring international usability of the device. Compliance with standards is according to EN/IEC 60947-5-1, GB/T 14048.5, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and JIS C8201-5-1.

Operational advantages include high mechanical life, fast switching speed, and reliability at high operating rates. RoHS/REACH compliance ensures environmental compatibility. The rated short-time current withstand of 100 A (1 s), 120 A (500 ms), 140 A (100 ms) ensures stability during short-term overloads. The rated insulation voltage of 690 V and impulse voltage withstand of 6 kV enhance safety in electrical installations. The associated fuse rating is specified as 10 A gG, enabling correct dimensioning of protective measures. The device is designed for use in industrial environments with high requirements for reliability and service life.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/566375
qrcode für Schneider Electric CAD32R7 contactor 3S2Ö 440 V