Schneider Electric CAD32BD, EAN: 3389110404166

Schneider Electric CAD32BD Auxiliary Contactor 3S+2NO 24VDC

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric CAD32BD Auxiliary Contactor 3S+2NO 24VDC

Lieske Part No. 468906
Mfg Part No CAD32BD
EAN-Code 3389110404166
Manufacturer Schneider Electric
Here only 107,23 EUR
127,60 EUR incl. VAT

Further information for Schneider Electric CAD32BD Auxiliary Contactor 3S+2NO 24VDC

Complementary
Utilisation categoryDC-13; AC-15; AC-14
Pole contact composition3 NO + 2 NC
Control circuit typeDC standard
[Uc] control circuit voltage24 V DC
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
[Ith] conventional free air thermal current10 A (at 60 °C)
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
[Icw] rated short-time withstand current100 A - 1 s; 120 A - 500 ms; 140 A - 100 ms
Associated fuse rating10 A gG conforming to IEC 60947-5-1
[Ui] rated insulation voltage600 V UL certified; 600 V CSA certified; 690 V conforming to IEC 60947-5-1
Mounting supportRail; Plate
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Tightening torque1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2; 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm; 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2
Control circuit voltage limits0.1...0.25 Uc (-40…70 °C):drop-out DC; 0.7...1.25 Uc (-40…60 °C):operational DC; 1...1.25 Uc (60…70 °C):operational DC
Operating time53...72 ms coil energisation and NO closing; 16...24 ms coil de-energisation and NO opening; 47...63 ms coil energisation and NC opening; 15...25 ms coil de-energisation and NC closing
Mechanical durability30 Mcycles
Maximum operating rate180 cyc/mn
Time constant28 ms
Inrush power in W5.4 W (at 20 °C)
Hold-in power consumption in W5.4 W at 20 °C
Minimum switching voltage17 V
Minimum switching current5 mA
Non-overlap time1.5 ms on energisation between NC and NO contact; 1.5 ms on de-energisation between NC and NO contact
Insulation resistance> 10 MOhm
Mechanical robustnessShocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27; Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27; Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6; Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6
Height77 mm
Width45 mm
Depth93 mm
Net weight0.58 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 60947-5-1; GB/T 14048.5; UL 60947-5-1; CSA C22.2 No 60947-5-1; JIS C8201-5-1
Product certificationsCB; CCC; UL; CSA; EAC; CE; UKCA
IP degree of protectionIP2X front face conforming to VDE 0106
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for operation-40…60 °C; 60…70 °C with derating
Ambient air temperature for storage-60…80 °C
Operating altitude0...3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys CAD
Product or component typeControl relay
Device short nameCAD
Contactor applicationControl circuit
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.200 cm
Package 1 Width9.400 cm
Package 1 Length11.400 cm
Package 1 Weight521.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight8.108 kg
Unit Type of Package 3P06
Number of Units in Package 3240
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight137.730 kg
The control relay CAD32BD from the TeSys Deca series by Schneider Electric is an auxiliary contactor designed for use in control circuits. It operates at 24 V DC and features five integrated auxiliary contacts configured as 3 NO + 2 NC (3 normally open, 2 normally closed). The device is designed for use in industrial applications, where it is employed for signal transmission, controlling auxiliary functions, or interlocking switching operations. The screw terminals allow connection with flexible or rigid cables in cross-sections from 1 to 4 mm²; for flexible cables with wire end ferrules, a cross-section of 1 to 2.5 mm² is also permitted. Mounting is either on a rail or directly onto a plate, with a device width of 45 mm.

Applications include control of drives, machine controls, safety functions, and other electrical switching operations in industrial environments. The device is designed for use in environments with an operating temperature range of -40 °C to 60 °C; at temperatures from 60 °C to 70 °C, a derating is required. Storage is possible in the range of -60 °C to 80 °C. The operating altitude is up to 3,000 m above sea level. The front-side protection rating IP2x protects against finger contact and offers some protection against solid objects, but not against water. The coating corresponds to category TH according to IEC 60068, indicating high resistance to humidity and temperature fluctuations.

Functions and features in detail include an integrated protective circuitry ensuring safe and reliable operation. The rated transient voltage withstand is 6 kV, ensuring high electrical strength under transient voltage stress. The rated insulation voltage is 690 V according to IEC 60947-5-1, with additional certifications for 600 V UL and CSA. The rated switching capacity is specified as 140 A for AC and 250 A for DC, enabling use in high-performance systems. The rated short-time withstand current is 100 A for 1 second, 120 A for 500 ms, and 140 A for 100 ms. The associated fuse protection is defined as 10 A gG according to IEC 60947-5-1.

Technology explained simply shows that the device operates with a control circuit voltage of 24 V DC, with the operating voltage required to be between 0.7 and 1.25 times the nominal voltage (at -40 °C to 60 °C). The minimum switching voltage is 17 V, and the minimum switching current is 5 mA. The coil pickup power and holding power consumption are each 5.4 W at 20 °C. The operating time is 53 to 72 ms for coil energization and closing of NO contacts, and 16 to 24 ms for de-energization and opening of NO contacts. The mechanical life is 30 million switching cycles, with a maximum operating rate of 180 operations per minute. The non-overlapping time between normally open and normally closed contacts is 1.5 ms, ensuring safe contact separation. The insulation resistance is greater than 10 MΩ, ensuring high electrical insulation.

Compatibility and accessories include the option to extend the device with additional auxiliary contacts. Expansion by up to nine additional auxiliary contacts is possible, with compatible auxiliary contact blocks such as LADN13 (1S3Ö), LADN22 (2S2Ö), or LA1DZ40 (4S) available. Additional components such as protective covers (e.g. LAD9ET1S), time blocks (e.g. LADT4), or interlocking blocks (e.g. LAD6K10F) can be added to meet specific requirements. Mounting is via screw or snap fastening, with a tightening torque of 1.7 Nm for the screw terminals.

Mounting and installation is on a standard rail (e.g. DIN rail) or directly onto a mounting plate. The device dimensions are 45 mm width, 77 mm height, and 93 mm depth. The product weight is 0.58 kg. Installation is simple and performed with a screwdriver (Phillips No. 2, flat Ø 6 or position No. 2). Mechanical robustness is specified according to IEC 60068-2-27 and IEC 60068-2-6, allowing shocks of 10 Gn (open) or 15 Gn (closed), and vibrations of 2 Gn (open) or 4 Gn (closed) in the frequency range of 5 to 300 Hz.

Operational advantages include high mechanical life, high switching capacity, easy mounting, and expandability. The integrated protective circuitry ensures reliable operation even under demanding operating conditions. Certifications according to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and other standards guarantee compliance with international standards. The usage categories DC-13, AC-15, and AC-14 define the operating conditions for DC and AC applications. The device is therefore suitable for a wide range of industrial control tasks, particularly in systems with high switching frequencies and demanding environmental conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/468906
qrcode für Schneider Electric CAD32BD Auxiliary Contactor 3S+2NO 24VDC