| Additional features |
| [Ui] Rated insulation voltage | 800 V AC 50/60 Hz |
| [Uimp] Rated impulse voltage withstand | 8 kV |
| [Ics] Rated operational short-circuit breaking capacity | 85 kA at 220 - 240 V AC 50/60 Hz corresponds to IEC 60947-2; 36 kA at 380 - 415 V AC 50/60 Hz corresponds to IEC 60947-2; 30 kA at 440 V AC 50/60 Hz corresponds to IEC 60947-2; 10 kA at 500 V AC 50/60 Hz corresponds to IEC 60947-2; 10 kA at 525 V AC 50/60 Hz corresponds to IEC 60947-2 |
| Mechanical life | 20000 cycles |
| Electrical lifetime | 20000 cycles at 440 V In/2; 10000 cycles at 440 V In; 10000 cycles at 690 V In/2; 5000 cycles at 690 V In |
| Power dissipation per pole | 3,8 W |
| Mounting bracket | Rear panel |
| Mounting position | Horizontal and vertical; lying on back |
| Connection on top side | front side |
| Connection on underside | front side |
| Terminal clamps | Cable lug/busbar |
| Terminal pitch | 35 mm with terminal extensions; 27 mm without terminal extensions |
| 9-mm pitch | 12 modules |
| Trigger power | 40 A at 40 °C |
| [Ir] type of long-time pickup setting (thermal protection) | Adjustable |
| [Ir] Long-time protection pick-up adjustment range | 0,7 - 1 x In |
| [tr] Type of long-time protection delay adjustment | Fixed |
| Neutral conductor protection setting | No protection (3D) |
| [Ii] type of instantaneous short-circuit protection setting | Fixed |
| [Ii] setting range of instantaneous short-circuit protection | 600 A |
| Earth fault protection | None |
| Number of sockets for electrical auxiliary devices | 1 socket (sockets) for auxiliary switch OF; 1 socket (sockets) for alarm switch SD; 1 socket (sockets) for voltage release MN or MX |
| Local signalling | Green status bit for auxiliary switch available |
| Width (B) | 108 mm |
| Height (H) | 137 mm |
| Depth (T) | 80 mm |
| Product weight | 1,42 kg |
| Colour | Grey (RAL 7016) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | ComPacT |
| Product name | ComPacT NSXm |
| Device short name | NSXm 63F |
| Product or component type | Power-cut-out switch |
| Device application | Distribution |
| Pole description | 4P |
| Description of protected poles | 3D |
| Neutral position | Left |
| [In] Rated current | 40 A at 40 °C |
| [Ue] Rated operational voltage | 690 V AC 50/60 Hz |
| Type of network | AC |
| Network frequency | 50/60 Hz |
| Suitability for insulation | Yes, complies with IEC 60947-2 |
| Application category | Category A |
| [Icu] Rated short-circuit breaking capacity | 85 kA Icu at 220 - 240 V AC 50/60 Hz conforms to IEC 60947-2; 36 kA Icu at 380 - 415 V AC 50/60 Hz conforms to IEC 60947-2; 35 kA Icu at 440 V AC 50/60 Hz conforms to IEC 60947-2; 15 kA Icu at 500 V AC 50/60 Hz conforms to IEC 60947-2; 10 kA Icu at 525 V AC 50/60 Hz conforms to IEC 60947-2 |
| Power class | F 36 kA 415 V AC |
| Trigger name | TM-D |
| Trigger technology | Thermal-magnetic |
| Tripping unit protection functions | LI |
| Control type | Toggle switch |
| Mounting type of power switch | Fixed |
| Mounting |
| Standards | EN/IEC 60947-2 |
| Over voltage category | III |
| Protection class for electric shocks | Class I on front |
| Pollution degree | 3 entspricht IEC 60664-1 |
| Degree of protection (IP) | IP40 complies with IEC 60529 |
| Degree of protection (IK) | IK07 corresponds to IEC 62262 |
| Operating ambient temperature | -25…70 °C |
| Ambient temperature during storage | -50…85 °C |
| Relative humidity | 0…95 % |
| Operating altitude | 2000 m without power reduction; 5000 m with power reduction |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 13,000 cm |
| VPE 1 width | 13,000 cm |
| VPE 1 length | 21,000 cm |
| Packaging weight (Lbs) | 1,480 kg |
| VPE 2 type | S03 |
| VPE 2 quantity | 6 |
| VPE 2 height | 30,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 9,300 kg |
| VPE 3 type | P12 |
| VPE 3 quantity | 48 |
| VPE 3 height | 45,000 cm |
| VPE 3 width | 80,000 cm |
| VPE 3 length | 120,000 cm |
| VPE 3 weight | 86,400 kg |