Schneider Electric BSH1402P22F2A, EAN: 3389118141858

Schneider Electric BSH1402P22F2A AC servomotor 19

Industrial Material > Engines and accessories

Schneider Electric BSH1402P22F2A AC servomotor 19

Lieske Part No. 150532
Mfg Part No BSH1402P22F2A
EAN-Code 3389118141858
Manufacturer Schneider Electric
Here only 3.359,70 EUR
3.998,04 EUR incl. VAT

Further information for Schneider Electric BSH1402P22F2A AC servomotor 19

Complementary
Range compatibilityLexium 05; Lexium 15
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current13.2 A
maximum continuous power4.2 W
Maximum current Irms44.1 A for LXM15LD28M3; 44.1 A for LXM15MD28N4; 44.1 A for LXM15MD40N4; 44.1 A for LXM15MD56N4; 44.1 A for LXM05AD42M3X; 44.1 A for LXM05AD57N4; 44.1 A for LXM05BD42M3X; 44.1 A for LXM05BD57N4; 44.1 A for LXM05CD42M3X; 44.1 A for LXM05CD57N4; 72 A for LXM32.D72N4
Maximum permanent current44.1 A
Switching frequency4 kHz
Second shaftWithout second shaft end
Shaft diameter24 mm
Shaft length50 mm
Feedback typeMultiturn SinCos Hiperface
Holding torque23 N.m holding brake
Motor flange size140 mm
Number of motor stacks2
Torque constant1.47 N.m/A at 120 °C
Back emf constant101 V/krpm at 120 °C
Rotor inertia14.48 kg.cm²
Stator resistance0.6 Ohm at 20 °C
Stator inductance7.4 mH at 20 °C
Stator electrical time constant12.33 ms at 20 °C
Maximum radial force Fr1680 N at 3000 rpm; 1930 N at 2000 rpm; 2430 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power24 W
Type of coolingNatural convection
Length310.5 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight17.7 kg
Sizing referenceBSH1402P
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed4000 rpm
Shaft endUntapped
IP degree of protectionIP65 standard; IP67 with IP67 kit
Speed feedback resolution131072 points/turn
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.16 cm
Package 1 Width20.32 cm
Package 1 Length59.18 cm
Package 1 Weight18.7 kg
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3660 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing conforms to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/150532
qrcode für Schneider Electric BSH1402P22F2A AC servomotor 19