| Complementary |
| Range compatibility | Lexium 05; Lexium 15 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 13.2 A |
| maximum continuous power | 4.2 W |
| Maximum current Irms | 44.1 A for LXM15LD28M3; 44.1 A for LXM15MD28N4; 44.1 A for LXM15MD40N4; 44.1 A for LXM15MD56N4; 44.1 A for LXM05AD42M3X; 44.1 A for LXM05AD57N4; 44.1 A for LXM05BD42M3X; 44.1 A for LXM05BD57N4; 44.1 A for LXM05CD42M3X; 44.1 A for LXM05CD57N4; 72 A for LXM32.D72N4 |
| Maximum permanent current | 44.1 A |
| Switching frequency | 4 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 23 N.m holding brake |
| Motor flange size | 140 mm |
| Number of motor stacks | 2 |
| Torque constant | 1.47 N.m/A at 120 °C |
| Back emf constant | 101 V/krpm at 120 °C |
| Rotor inertia | 14.48 kg.cm² |
| Stator resistance | 0.6 Ohm at 20 °C |
| Stator inductance | 7.4 mH at 20 °C |
| Stator electrical time constant | 12.33 ms at 20 °C |
| Maximum radial force Fr | 1680 N at 3000 rpm; 1930 N at 2000 rpm; 2430 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 24 W |
| Type of cooling | Natural convection |
| Length | 310.5 mm |
| Centring collar diameter | 130 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 11 mm |
| Circle diameter of the mounting holes | 165 mm |
| Net weight | 17.7 kg |
| Sizing reference | BSH1402P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 4000 rpm |
| Shaft end | Untapped |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 27.0 cm |
| Package 1 Width | 27.0 cm |
| Package 1 Length | 48.2 cm |
| Package 1 Weight | 18.7 kg |
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 19.5 Nm and achieves a peak torque of 60.1 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3660 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing conforms to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.