Schneider Electric BSH1401T32F2A, EAN: 3389118141346

Schneider Electric BSH1401T32F2A AC servomotor 11

Industrial Material > Engines and accessories

Schneider Electric BSH1401T32F2A AC servomotor 11

Lieske Part No. 293515
Mfg Part No BSH1401T32F2A
EAN-Code 3389118141346
Manufacturer Schneider Electric
Here only 3.429,79 EUR
4.081,45 EUR incl. VAT

Further information for Schneider Electric BSH1401T32F2A AC servomotor 11

Complementary
Range compatibilityLexium 05; Lexium 15
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current13.9 A
maximum continuous power3.6 W
Maximum current Irms37.1 A for LXM15MD56N4; 37.1 A for LXM05AD42M3X; 37.1 A for LXM05BD42M3X; 37.1 A for LXM05CD42M3X
Maximum permanent current37.1 A
Switching frequency4 kHz
Second shaftWithout second shaft end
Shaft diameter24 mm
Shaft length50 mm
Key width40 mm
Feedback typeMultiturn SinCos Hiperface
Holding torque23 N.m holding brake
Motor flange size140 mm
Number of motor stacks1
Torque constant0.83 N.m/A at 120 °C
Back emf constant56 V/krpm at 120 °C
Number of motor poles10
Rotor inertia8.56 kg.cm²
Stator resistance0.4 Ohm at 20 °C; 0.44 Ohm at 20 °C
Stator inductance4.9 mH at 20 °C; 5.15 mH at 20 °C
Stator electrical time constant11.14 ms at 20 °C; 12.88 ms at 20 °C
Maximum radial force Fr1530 N at 3000 rpm; 1760 N at 2000 rpm; 2210 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power24 W
Type of coolingNatural convection
Length255.5 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight13 kg
Sizing referenceBSH1401T
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed4000 rpm
Continuous stall torque11.1 N.m for LXM15MD56N4, 230 V, three phase; 11.4 N.m for LXM05AD42M3X, 200...240 V, three phase; 11.4 N.m for LXM05BD42M3X, 200...240 V, three phase; 11.4 N.m for LXM05CD42M3X, 200...240 V, three phase
Peak stall torque23.33 N.m for LXM15MD56N4, 230 V, three phase; 23.33 N.m for LXM05AD42M3X, 200...240 V, three phase; 23.33 N.m for LXM05BD42M3X, 200...240 V, three phase; 23.33 N.m for LXM05CD42M3X, 200...240 V, three phase
Nominal output power2000 W for LXM15MD56N4, 230 V, three phase; 2200 W for LXM05AD42M3X, 200...240 V, three phase; 2200 W for LXM05BD42M3X, 200...240 V, three phase; 2200 W for LXM05CD42M3X, 200...240 V, three phase
Nominal torque6.9 N.m for LXM05AD42M3X, 200...240 V, three phase; 6.9 N.m for LXM05BD42M3X, 200...240 V, three phase; 6.9 N.m for LXM05CD42M3X, 200...240 V, three phase; 7.63 N.m for LXM15MD56N4, 230 V, three phase
Nominal speed3000 rpm for LXM05AD42M3X, 200...240 V, three phase; 3000 rpm for LXM05BD42M3X, 200...240 V, three phase; 3000 rpm for LXM05CD42M3X, 200...240 V, three phase; 2500 rpm for LXM15MD56N4, 230 V, three phase
Product compatibilityLXM05AD42M3X at 200...240 V three phase; LXM05BD42M3X at 200...240 V three phase; LXM05CD42M3X at 200...240 V three phase; LXM15MD56N4 at 230 V three phase
Shaft endKeyed
IP degree of protectionIP65 standard; IP67 with IP67 kit
Speed feedback resolution131072 points/turn x 4096 turns
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height27.0 cm
Package 1 Width27.0 cm
Package 1 Length48.2 cm
Package 1 Weight9.79 kg
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and achieves a peak torque of 27 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3170 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed with a key and complies with protection class IP65. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/293515
qrcode für Schneider Electric BSH1401T32F2A AC servomotor 11