Complementary
Range compatibility	Lexium 32; Lexium 15; Lexium 05
supply voltage max	480 V
Network number of phases	Three phase
Continuous stall current	7.8 A
maximum continuous power	3.6 W
Maximum current Irms	20.8 A for LXM15LD28M3; 20.8 A for LXM15MD28N4; 20.8 A for LXM15MD40N4; 20.8 A for LXM05AD34N4; 20.8 A for LXM05BD34N4; 20.8 A for LXM05CD34N4; 20.8 A for LXM32.D30N4
Maximum permanent current	20.8 A
Switching frequency	8 kHz
Second shaft	Without second shaft end
Shaft diameter	24 mm
Shaft length	50 mm
Key width	40 mm
Feedback type	Multiturn SinCos Hiperface
Motor flange size	140 mm
Number of motor stacks	1
Torque constant	1.43 N.m/A at 120 °C
Back emf constant	100 V/krpm at 120 °C
Number of motor poles	5.0
Rotor inertia	7.41 kg.cm²
Stator resistance	1.41 Ohm at 20 °C
Stator inductance	8.17 mH at 20 °C
Stator electrical time constant	11.06 ms at 20 °C
Maximum radial force Fr	1530 N at 3000 rpm; 1760 N at 2000 rpm; 2210 N at 1000 rpm
Maximum axial force Fa	0.2 x Fr
Type of cooling	Natural convection
Length	217.5 mm
Centring collar diameter	130 mm
Centring collar depth	3.5 mm
Number of mounting holes	4
Mounting holes diameter	11 mm
Circle diameter of the mounting holes	165 mm
Net weight	11.9 kg
Sizing reference	BSH1401P
Accuracy error [angular]	1.4 °
Temperature copper hot	120 °C
Temperature magnet hot	100 °C
Temperature magnet rt	20 °C
Output current 3s peak	20.8 A
Inertia	0.0 kg.cm² of brake; 7.41 kg.cm² of motor
Contractual warranty
Warranty (in months)	18
Main
Device short name	BSH
Product or component type	Servo motor
Maximum mechanical speed	4000 rpm
Product compatibility	LXM15LD28M3 at 230 V three phase; LXM05AD34N4 at 380...480 V three phase; LXM05BD34N4 at 380...480 V three phase; LXM05CD34N4 at 380...480 V three phase; LXM15MD28N4 at 400 V three phase; LXM15MD28N4 at 480 V three phase; LXM15MD40N4 at 400 V three phase; LXM15MD40N4 at 480 V three phase; LXM15MD28N4 at 230 V three phase
Shaft end	Keyed
IP degree of protection	IP65 standard; IP67 with IP67 kit
Speed feedback resolution	131072 points/turn x 4096 turns
Holding brake	Without
Mounting support	International standard flange
Electrical connection	Straight connectors
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	27.0 cm
Package 1 Width	27.0 cm
Package 1 Length	48.2 cm
Package 1 Weight	8.0 kg

BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and achieves a peak torque of 27 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3170 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed with a key and complies with protection class IP65. The motor housing complies with protection class IP65. There is no holding brake. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.