| Complementary |
| Range compatibility | Lexium 15 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 12.7 A |
| maximum continuous power | 3.64 W |
| Maximum current Irms | 34.8 A for LXM15LD28M3; 61 A for LXM15MD40N4 |
| Maximum permanent current | 66.3 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Feedback type | Multiturn SinCos Hiperface |
| Motor flange size | 100 mm |
| Number of motor stacks | 4 |
| Torque constant | 1.62 N.m/A at 120 °C; 0.86 N.m/A at 120 °C |
| Back emf constant | 103 V/krpm at 120 °C; 50 V/krpm at 120 °C |
| Number of motor poles | 8 |
| Rotor inertia | 4.22 kg.cm² |
| Stator resistance | 1.81 Ohm at 20 °C |
| Stator inductance | 13 mH at 20 °C; 2.9 mH at 20 °C |
| Stator electrical time constant | 6.44 ms at 20 °C; 7.18 ms at 20 °C |
| Maximum radial force Fr | 1070 N at 1000 rpm; 740 N at 3000 rpm; 850 N at 2000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 276.5 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 9.2 kg |
| Sizing reference | BSH1004T |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 6000 rpm |
| Continuous stall torque | 9.31 N.m for LXM15MD40N4, 230 V, three phase; 8.18 N.m for LXM15LD28M3, 230 V, three phase |
| Peak stall torque | 15.7 N.m for LXM15LD28M3, 230 V, three phase; 21.04 N.m for LXM15MD40N4, 230 V, three phase |
| Nominal output power | 2500 W for LXM15LD28M3, 230 V, three phase; 2500 W for LXM15MD40N4, 230 V, three phase |
| Nominal torque | 7 N.m for LXM15LD28M3, 230 V, three phase; 7 N.m for LXM15MD40N4, 230 V, three phase |
| Nominal speed | 3500 rpm for LXM15LD28M3, 230 V, three phase; 3500 rpm for LXM15MD40N4, 230 V, three phase |
| Product compatibility | LXM15LD28M3 at 230 V three phase; LXM15MD40N4 at 230 V three phase |
| Shaft end | Untapped |
| IP degree of protection | IP50 standard |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Holding brake | Without |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 19.2 cm |
| Package 1 Width | 17.5 cm |
| Package 1 Length | 55.7 cm |
| Package 1 Weight | 10.0 kg |
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 10 Nm and achieves a peak torque of 40.5 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2.6 kW. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing conforms to protection class IP65. There is no holding brake. The Lexium LXM32 series servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.