| Complementary |
| Range compatibility | Lexium 05; Lexium 32; Lexium 15 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 7.3 A |
| maximum continuous power | 1.6 W |
| Maximum current Irms | 18 A for LXM32.D18M2 at 230 V; 15 A for LXM32.D30M2 at 115 V; 23 A for LXM15LD28M3; 25.1 A for LXM05AD28F1; 25.1 A for LXM05AD28M2 at 115 V; 25.1 A for LXM05AD42M3X; 25.1 A for LXM05BD28F1; 25.1 A for LXM05BD28M2; 25.1 A for LXM05BD42M3X; 25.1 A for LXM05CD28F1; 25.1 A for LXM05CD28M2; 25.1 A for LXM05CD42M3X |
| Maximum permanent current | 25.1 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Key width | 30 mm |
| Feedback type | Multiturn SinCos Hiperface |
| Holding torque | 9 N.m holding brake |
| Motor flange size | 100 mm |
| Number of motor stacks | 1 |
| Torque constant | 0.45 N.m/A at 120 °C |
| Back emf constant | 29 V/krpm at 120 °C |
| Number of motor poles | 4.0 |
| Rotor inertia | 2.018 kg.cm² |
| Stator resistance | 0.87 Ohm at 20 °C |
| Stator inductance | 2.15 mH at 20 °C |
| Stator electrical time constant | 4.6 ms at 20 °C |
| Maximum radial force Fr | 530 N at 5000 rpm; 570 N at 4000 rpm; 630 N at 3000 rpm; 720 N at 2000 rpm; 900 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 18 W |
| Type of cooling | Natural convection |
| Length | 199.5 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 4.8 kg |
| Sizing reference | BSH1001T |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 25.1 A |
| Inertia | 0.618 kg.cm² of brake; 1.4 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 6000 rpm |
| Product compatibility | LXM05AD28F1 at 110...120 V single phase; LXM05AD28M2 at 200...240 V single phase; LXM05BD28F1 at 110...120 V single phase; LXM05BD28M2 at 200...240 V single phase; LXM05CD28F1 at 110...120 V single phase; LXM05CD28M2 at 200...240 V single phase; LXM32.D30M2 at 115 V single phase; LXM32.D18M2 at 230 V single phase; LXM05AD42M3X at 200...240 V three phase; LXM05BD42M3X at 200...240 V three phase; LXM05CD42M3X at 200...240 V three phase; LXM15LD28M3 at 230 V three phase |
| Shaft end | Keyed |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.4 cm |
| Package 1 Width | 16.3 cm |
| Package 1 Length | 40.7 cm |
| Package 1 Weight | 4.95 kg |
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.3 Nm and achieves a peak torque of 9.6 Nm. Its nominal speed is up to 6000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1630 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is designed with a key and complies with protection class IP65. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.