Schneider Electric BSH1001P11F1A, EAN: 3389118138223

Schneider Electric BSH1001P11F1A AC servomotor 3

Industrial Material > Engines and accessories

Schneider Electric BSH1001P11F1A AC servomotor 3

Lieske Part No. 783297
Mfg Part No BSH1001P11F1A
EAN-Code 3389118138223
Manufacturer Schneider Electric
Here only 1.725,76 EUR
2.053,65 EUR incl. VAT

Further information for Schneider Electric BSH1001P11F1A AC servomotor 3

Complementary
Range compatibilityLexium 15; Lexium 32; Lexium 05
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current3.5 A
maximum continuous power1.6 W
Maximum current Irms12 A for LXM15LD21M3; 12 A for LXM15LD10N4; 12 A for LXM15LD17N4; 12 A for LXM05AD17M3X; 12 A for LXM05AD22N4; 12 A for LXM05BD17M3X; 12 A for LXM05BD22N4; 12 A for LXM05CD17M3X; 12 A for LXM05CD22N4; 12 A for LXM32.D18N4
Maximum permanent current12 A
Switching frequency8 kHz
Second shaftWithout second shaft end
Shaft diameter19 mm
Shaft length40 mm
Key width30 mm
Feedback typeSingle turn SinCos Hiperface
Holding torque9 N.m holding brake
Motor flange size100 mm
Number of motor stacks1
Torque constant0.89 N.m/A at 120 °C
Back emf constant60 V/krpm at 120 °C
Number of motor poles4.0
Rotor inertia2.018 kg.cm²
Stator resistance3.8 Ohm at 20 °C
Stator inductance9.5 mH at 20 °C
Stator electrical time constant4.63 ms at 20 °C
Maximum radial force Fr530 N at 5000 rpm; 570 N at 4000 rpm; 630 N at 3000 rpm; 720 N at 2000 rpm; 900 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power18 W
Type of coolingNatural convection
Length199.5 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes115 mm
Net weight4.8 kg
Sizing referenceBSH1001P
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak12.0 A
Inertia0.618 kg.cm² of brake; 1.4 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed6000 rpm
Shaft endKeyed
IP degree of protectionIP50 standard
Speed feedback resolution131072 points/turn
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionStraight connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height15.4 cm
Package 1 Width16.3 cm
Package 1 Length40.7 cm
Package 1 Weight4.95 kg
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.3 Nm and achieves a peak torque of 9.6 Nm. Its nominal speed is up to 6000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1630 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is designed with a key and complies with protection class IP54. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/783297
qrcode für Schneider Electric BSH1001P11F1A AC servomotor 3