Complementary
Range compatibility	Lexium 05; Lexium 32; Lexium 15
supply voltage max	480 V
Network number of phases	Three phase
Continuous stall current	4.1 A
maximum continuous power	1.7 W
Maximum current Irms	15.2 A for LXM15LD13M3; 15.2 A for LXM15LD21M3; 15.2 A for LXM15LD17N4; 15.2 A for LXM15LU60N4; 15.2 A for LXM15LD10N4; 17 A for LXM05AD17M2; 17 A for LXM05AD28M2; 17 A for LXM05AD17M3X; 17 A for LXM05AD22N4; 17 A for LXM05BD17M2; 17 A for LXM05BD28M2; 17 A for LXM05BD17M3X; 17 A for LXM05BD22N4; 17 A for LXM05CD17M2; 17 A for LXM05CD28M2; 17 A for LXM05CD17M3X; 17 A for LXM05CD22N4; 17 A for LXM32.D18N4
Maximum permanent current	17 A
Switching frequency	8 kHz
Second shaft	Without second shaft end
Shaft diameter	14 mm
Shaft length	30 mm
Feedback type	Single turn SinCos Hiperface
Motor flange size	70 mm
Number of motor stacks	3
Torque constant	0.78 N.m/A at 120 °C
Back emf constant	49 V/krpm at 120 °C
Number of motor poles	3.0
Rotor inertia	0.58 kg.cm²
Stator resistance	2.7 Ohm at 20 °C
Stator inductance	7.3 mH at 20 °C
Stator electrical time constant	4.82 ms at 20 °C
Maximum radial force Fr	400 N at 6000 rpm; 430 N at 5000 rpm; 460 N at 4000 rpm; 510 N at 3000 rpm; 580 N at 2000 rpm; 730 N at 1000 rpm
Maximum axial force Fa	0.2 x Fr
Type of cooling	Natural convection
Length	220 mm
Centring collar diameter	60 mm
Centring collar depth	2.5 mm
Number of mounting holes	4
Mounting holes diameter	5.5 mm
Circle diameter of the mounting holes	82 mm
Net weight	3.62 kg
Sizing reference	BSH0703P
Accuracy error [angular]	1.4 °
Temperature copper hot	120 °C
Temperature magnet hot	100 °C
Temperature magnet rt	20 °C
Output current 3s peak	17.0 A
Inertia	0.0 kg.cm² of brake; 0.58 kg.cm² of motor
Contractual warranty
Warranty (in months)	18
Main
Device short name	BSH
Product or component type	Servo motor
Maximum mechanical speed	8000 rpm
Shaft end	Untapped
IP degree of protection	IP50 standard
Speed feedback resolution	131072 points/turn
Holding brake	Without
Mounting support	International standard flange
Electrical connection	Straight connectors
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	11.500 cm
Package 1 Width	19.100 cm
Package 1 Length	39.900 cm
Package 1 Weight	3.822 kg
Unit Type of Package 2	S06
Number of Units in Package 2	12
Package 2 Height	73.500 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	60.112 kg

BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its nominal speed is up to 7200 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1550 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 70 mm for fastening. The drive shaft has a diameter of 14 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing conforms to protection class IP65. There is no holding brake. The Lexium LXM32 series servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.