Schneider Electric BSH0701T31A2A, EAN: 3389118136113

Schneider Electric BSH0701T31A2A AC servomotor 1

Industrial Material > Engines and accessories

Schneider Electric BSH0701T31A2A AC servomotor 1

Lieske Part No. 149602
Mfg Part No BSH0701T31A2A
EAN-Code 3389118136113
Manufacturer Schneider Electric
Here only 1.180,79 EUR
1.405,14 EUR incl. VAT

Further information for Schneider Electric BSH0701T31A2A AC servomotor 1

Complementary
Range compatibilityLexium 32; Lexium 05; Lexium 15
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current3.2 A
maximum continuous power1.06 W
Maximum current Irms10 A for LXM32.D18M2; 9 A for LXM32.U90M2; 9.9 A for LXM15LD13M3; 9.9 A for LXM15LD21M3; 9.9 A for LXM15LU60N4; 9.9 A for LXM15LD10N4
Maximum permanent current10.1 A
Switching frequency8 kHz
Second shaftWithout second shaft end
Shaft diameter11 mm
Shaft length23 mm
Key width18 mm
Feedback typeSingle turn SinCos Hiperface
Motor flange size70 mm
Number of motor stacks1
Torque constant0.44 N.m/A at 120 °C
Back emf constant26 V/krpm at 120 °C
Number of motor poles3.0
Rotor inertia0.25 kg.cm²
Stator resistance3.3 Ohm at 20 °C
Stator inductance6.75 mH at 20 °C
Stator electrical time constant3.73 ms at 20 °C
Maximum radial force Fr360 N at 6000 rpm; 380 N at 5000 rpm; 410 N at 4000 rpm; 460 N at 3000 rpm; 520 N at 2000 rpm; 660 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Type of coolingNatural convection
Length154 mm
Centring collar diameter60 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes82 mm
Net weight2.2 kg
Sizing referenceBSH0701T
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak10.1 A
Inertia0.0 kg.cm² of brake; 0.25 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed8000 rpm
Shaft endKeyed
IP degree of protectionIP65 standard; IP67 with IP67 kit
Speed feedback resolution131072 points/turn
Holding brakeWithout
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height14.800 cm
Package 1 Width39.700 cm
Package 1 Length59.500 cm
Package 1 Weight2.865 kg
Unit Type of Package 2S04
Number of Units in Package 22
Package 2 Height30.000 cm
Package 2 Width40.000 cm
Package 2 Length60.000 cm
Package 2 Weight6.380 kg
Unit Type of Package 3P12
Number of Units in Package 38
Package 3 Height45.000 cm
Package 3 Width80.000 cm
Package 3 Length120.000 cm
Package 3 Weight37.520 kg
The BSH0701T31A2A servo motor from Schneider Electric is a three-phase AC servo motor of the BSH series, specifically designed for use in industrial drive systems. It is part of the Lexium 32 servo drive series and features a low rotor inertia, enabling high acceleration capability in dynamic applications. The winding technology ensures high power density in a compact design. The motor has a nominal continuous standstill torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. The rated speed reaches up to 7200 rpm, with the rated power reaching up to 950 W depending on voltage. The maximum mechanical speed is 8000 rpm.

Applications
This motor is suitable for applications in automation technology, such as in machine building, packaging technology, or robotic systems. The combination of high dynamics and compact design makes it particularly suitable for drives requiring high precision and fast response. The IP65 protection rating ensures reliable operation in industrial environments with dust and splashing water exposure. Optionally, the protection rating can be increased to IP67 by using the IP 67 set, enabling use in outdoor or humid environments.

Functions and Equipment in Detail
The motor is equipped with a SinCos Hiperface single-turn encoder, providing a resolution of 131072 points per revolution. This enables precise position and speed feedback for the drive. Electrical connection is made via two rotatable angled connectors (2x M23), offset by 90°, allowing flexible mounting and cable routing. The shaft end is fitted with a keyway, ensuring a secure mechanical connection to drive accessories. The shaft diameter is 11 mm, the shaft length is 23 mm, and the keyway width is 18 mm.

Technology Explained Simply
The torque constant is 0.44 Nm/A at a copper temperature of 120 °C, describing the motor's efficiency under high loads. The back-EMF constant is 26 V/krpm, indicating the electrical feedback during rotation. The stator resistance is 3.3 Ohm at 20 °C, the stator inductance is 6.75 mH, and the electrical time constant is 3.73 ms. These values are critical for the motor's controllability and stability during operation. Cooling is achieved through natural convection, ensuring maintenance-free and reliable operation.

Compatibility and Accessories
The motor is compatible with servo amplifiers from the Lexium 32, Lexium 05, and Lexium 15 families. For operation, the corresponding LXM32 series servo drives are recommended. Available accessories include encoder cables (e.g. VW3M8102R200, VW3M8102R150), brake resistors (e.g. VW3A7607R20, VW3A7603R07), and gearboxes (e.g. GBX060005K, GBX080020K), which can be added depending on the application configuration. Mounting is done via an international standard flange with a 70 mm diameter, featuring four mounting holes with a diameter of 5.5 mm and a circle diameter of 82 mm.

Mounting and Installation
Mounting is done via the standard flange, enabling universal fastening. The rotatable angled connectors simplify cable connection and allow optimal positioning. The maximum radial force is 360 N at 6000 rpm and decreases with lower speeds, while the maximum axial force is 20% of the radial force. The motor length is 154 mm, the centering ring diameter is 60 mm, and the centering ring depth is 2.5 mm.

Operational Advantages
The motor offers high dynamics due to low rotor inertia and a compact design. The SinCos Hiperface feedback ensures high positioning accuracy. The IP65 protection rating (optionally IP67) allows use in demanding environments. Natural convection cooling reduces maintenance requirements. Compatibility with the Lexium series ensures an integrated control solution. The maximum continuous power is 1.06 W, the continuous standstill current is 3.2 A, and the maximum current is 10.1 A. The pulse frequency is 8 kHz, enabling fast drive response. The angular error accuracy is 1.4 °, sufficient for precise positioning tasks. The copper temperature during operation reaches up to 120 °C, and the magnet temperature up to 100 °C, indicating thermal load capacity. The warranty period is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/149602
qrcode für Schneider Electric BSH0701T31A2A AC servomotor 1