| Complementary |
| Range compatibility | Lexium 15; Lexium 32; Lexium 05 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 3.2 A |
| maximum continuous power | 1.06 W |
| Maximum current Irms | 10 A for LXM32.D18M2; 9 A for LXM32.U90M2; 9.9 A for LXM15LD13M3; 9.9 A for LXM15LD21M3; 9.9 A for LXM15LU60N4; 9.9 A for LXM15LD10N4 |
| Maximum permanent current | 10.1 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| Feedback type | Single turn SinCos Hiperface |
| Motor flange size | 70 mm |
| Number of motor stacks | 1 |
| Torque constant | 0.44 N.m/A at 120 °C |
| Back emf constant | 26 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.25 kg.cm² |
| Stator resistance | 3.3 Ohm at 20 °C |
| Stator inductance | 6.75 mH at 20 °C |
| Stator electrical time constant | 3.73 ms at 20 °C |
| Maximum radial force Fr | 360 N at 6000 rpm; 380 N at 5000 rpm; 410 N at 4000 rpm; 460 N at 3000 rpm; 520 N at 2000 rpm; 660 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 154 mm |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 82 mm |
| Net weight | 2.2 kg |
| Sizing reference | BSH0701T |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 10.1 A |
| Inertia | 0.0 kg.cm² of brake; 0.25 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 8000 rpm |
| Shaft end | Untapped |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | Without |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 12.3 cm |
| Package 1 Width | 12.8 cm |
| Package 1 Length | 37.7 cm |
| Package 1 Weight | 2.1 kg |
The servomotor BSH0701T21A2A from Schneider Electric belongs to the BSH series of Lexium 32 servo drives and is designed as a three-phase AC servomotor for dynamic applications. It features a low rotor inertia, enabling high acceleration capability. The winding technology ensures increased power density in a compact design. The motor has a nominal continuous standstill torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. The rated speed reaches up to 7200 rpm, with the rated power reaching up to 950 W depending on voltage. The maximum mechanical speed is 8000 rpm. The motor is designed for 3-phase supply, with a maximum supply voltage of 480 V.
Applications
This servomotor is suitable for industrial applications requiring high dynamics, precision, and reliability. Typical applications include machine building, automation technology, packaging technology, and material handling. The combination of low inertia and high power density makes it particularly suitable for drives with fast motion cycles and high accelerations.
Functions and Equipment in Detail
The motor features an integrated encoder with SinCos Hiperface Singleturn technology, providing a resolution of 131072 points per revolution. This high resolution enables precise position detection and control. Feedback is provided via Singleturn encoder technology, ensuring accurate angular measurement within one revolution. The accuracy deviation is 1.4 °. Electrical connection is made via two rotatable angled connectors (M23), offset by 90°, allowing flexible mounting and cabling. The shaft end is smooth, with a diameter of 11 mm and a length of 23 mm. The protection rating is standard IP65, with an upgrade to IP67 possible using an additional IP67 kit. The motor housing is designed for industrial environments and provides protection against dust and splashing water.
Technology Explained Simply
The torque constant is 0.44 Nm/A at a copper temperature of 120 °C, describing the motor's efficiency under high loads. The back-EMF constant is 26 V/krpm, indicating the electrical feedback during rotation. The motor has 3 poles and a rotor inertia of 0.25 kg.cm². The stator resistance is 3.3 Ohm at 20 °C, the stator inductance is 6.75 mH, and the electrical time constant is 3.73 ms. Cooling is achieved through natural convection, ensuring maintenance-free and reliable operation. The maximum radial force varies with speed between 360 N (at 6000 rpm) and 660 N (at 1000 rpm), while the maximum axial force is 0.2 times the radial force.
Compatibility and Accessories
The servomotor is compatible with the Lexium 15, Lexium 32, and Lexium 05 servo amplifier families. For connection to the drive, encoder cables such as VW3M8102R150 (15 m) or VW3M8102R100 (10 m) are suitable. Additionally, gearboxes such as GBX060008K (reduction ratio 8:1) or GBX080020K (20:1) can be used to adjust speed and torque. For operation with safety functions, the safety cable VW3M8802R15 (1.5 m) is available. The use of brake resistors such as VW3A7603R30 or VW3A7605R30 is required for systems with holding brakes, although the motor itself is not equipped with a holding brake.
Mounting and Installation
The motor is mounted using an international standard flange with a 70 mm diameter. Mounting is done via 4 holes with a diameter of 5.5 mm, arranged on a circular diameter of 82 mm. The centering ring has a diameter of 60 mm and a depth of 2.5 mm. The total length of the motor is 154 mm. The rotatable angled connectors allow for easy and flexible cabling. Mounting typically occurs on machine structures, with mechanical loads (radial and axial forces) needing to be considered.
Advantages in Operation
The motor offers high dynamics due to low inertia and high acceleration capability. The SinCos Hiperface encoder technology ensures precise position detection. Natural convection cooling reduces maintenance requirements. Compatibility with various Lexium servo amplifiers enables flexible integration into existing systems. The IP65 protection rating (optional IP67) makes the motor suitable for use in industrial environments with increased contamination risk. The maximum continuous power is 1.06 W, the continuous standstill current is 3.2 A, and the maximum continuous current is 10.1 A. The pulse frequency is 8 kHz, ensuring fast drive response. The product weight is 2.2 kg.