Schneider Electric BSH0701T02A2A, EAN: 3389118135918

Schneider Electric BSH0701T02A2A AC servomotor

Industrial Material > Engines and accessories

Schneider Electric BSH0701T02A2A AC servomotor

Lieske Part No. 150641
Mfg Part No BSH0701T02A2A
EAN-Code 3389118135918
Manufacturer Schneider Electric
Here only 1.759,33 EUR
2.093,60 EUR incl. VAT

Further information for Schneider Electric BSH0701T02A2A AC servomotor

Complementary
Range compatibilityLexium 05; Lexium 15; Lexium 32
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current3.2 A
maximum continuous power1.06 W
Maximum current Irms10 A for LXM32.D18M2; 9 A for LXM32.U90M2; 9.9 A for LXM15LD13M3; 9.9 A for LXM15LD21M3; 9.9 A for LXM15LU60N4; 9.9 A for LXM15LD10N4
Maximum permanent current10.1 A
Switching frequency8 kHz
Second shaftWithout second shaft end
Shaft diameter11 mm
Shaft length23 mm
Feedback typeMultiturn SinCos Hiperface
Motor flange size70 mm
Number of motor stacks1
Torque constant0.44 N.m/A at 120 °C
Back emf constant26 V/krpm at 120 °C
Number of motor poles3.0
Rotor inertia0.25 kg.cm²
Stator resistance3.3 Ohm at 20 °C
Stator inductance6.75 mH at 20 °C
Stator electrical time constant3.73 ms at 20 °C
Maximum radial force Fr360 N at 6000 rpm; 380 N at 5000 rpm; 410 N at 4000 rpm; 460 N at 3000 rpm; 520 N at 2000 rpm; 660 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Type of coolingNatural convection
Length154 mm
Centring collar diameter60 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes82 mm
Net weight2.2 kg
Sizing referenceBSH0701T
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak10.1 A
Inertia0.0 kg.cm² of brake; 0.25 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed8000 rpm
Shaft endUntapped
IP degree of protectionIP50 standard
Speed feedback resolution131072 points/turn x 4096 turns
Holding brakeWithout
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height12.3 cm
Package 1 Width12.8 cm
Package 1 Length37.7 cm
Package 1 Weight2.1 kg
The BSH0701T02A2A servo motor from Schneider Electric is a three-phase AC servo motor from the Lexium 32 series, designed for dynamic applications in industrial automation. It features a low rotor inertia, enabling high acceleration capability. The winding technology ensures a compact design with high power density. The motor has a nominal continuous standstill torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. The maximum mechanical speed is 8000 rpm, with the rated speed reaching up to 7200 rpm depending on the supply voltage. The rated power is voltage-dependent and can reach up to 950 W. The maximum operating voltage is 480 V, and the supply is via a 3-phase power source.

Applications
This motor is suitable for applications requiring high dynamics and precision, such as in the machine tool industry, robotics, or packaging automation. The combination of low inertia and high power density makes it particularly suitable for drives with fast motion cycles. The protection rating IP50 for the shaft end and IP65 for the motor housing allows use in environments with low dust and splash water ingress, with the shaft end designed to IP54.

Functions and Equipment in Detail
The motor is equipped with a multiturn SinCos Hiperface encoder, providing a resolution of 131072 points per revolution and 4096 revolutions. This feedback technology ensures precise position and speed measurement over multiple revolutions. The electrical connection is made via rotatable angled connectors (2x M23), bent at 90°, enabling flexible mounting and cable routing. The shaft end is smooth, with a diameter of 11 mm and a length of 23 mm. No holding brake is integrated.

Technology Explained Simply
The torque constant is 0.44 Nm/A at a copper temperature of 120 °C, describing the motor's efficiency under load conditions. The back-EMF constant is 26 V/krpm, indicating the electrical reaction to rotational movement. The stator resistance is 3.3 Ohm at 20 °C, and the stator inductance is 6.75 mH, defining the motor's electrical characteristics. The electrical time constant is 3.73 ms, describing the motor's response speed to current changes. Cooling is achieved through natural convection, eliminating the need for additional cooling components.

Compatibility and Accessories
The motor is compatible with the Lexium 05, Lexium 15, and Lexium 32 servo amplifier families. For integration into existing systems, suitable accessories such as Hiperface encoder cables (e.g. VW3M8102R50), brake resistors (e.g. VW3A7607R20), or gearboxes (e.g. GBY060012K) can be used. Mounting is done via an international standard flange with a 70 mm diameter, four mounting holes with 5.5 mm diameter, and a circle diameter of 82 mm. The center ring has a diameter of 60 mm and a depth of 2.5 mm.

Mounting and Installation
Mounting is done via the standard flange, enabling universal fastening. The rotatable angled connectors simplify cable connection, especially in tight mounting areas. The maximum radial force is 360 N at 6000 rpm and increases at lower speeds, with the maximum axial force being 0.2 times the radial force. The motor length is 154 mm, and the product weight is 2.2 kg.

Operational Advantages
The motor offers high dynamics due to low inertia and a compact design. The multiturn feedback enables precise positioning over multiple revolutions. The rotatable connectors simplify installation, and natural convection cooling reduces maintenance effort. Compatibility with various Lexium servo amplifiers provides flexibility in system selection. The accuracy deviation is 1.4 °, sufficient for precise applications. The maximum continuous power is 1.06 W, and the continuous current at standstill is 3.2 A. The maximum current is 10.1 A, with the output current for 3 seconds also being 10.1 A. The pulse frequency is 8 kHz, describing the control speed. The magnet temperature is 100 °C during operation and 20 °C at room temperature, while the copper temperature reaches 120 °C during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/150641
qrcode für Schneider Electric BSH0701T02A2A AC servomotor