Schneider Electric BSH0553T21A2A, EAN: 3389118159754

Schneider Electric BSH0553T21A2A AC servomotor 1

Industrial Material > Engines and accessories

Schneider Electric BSH0553T21A2A AC servomotor 1

Lieske Part No. 291108
Mfg Part No BSH0553T21A2A
EAN-Code 3389118159754
Manufacturer Schneider Electric
Here only 1.057,37 EUR
1.258,27 EUR incl. VAT

Further information for Schneider Electric BSH0553T21A2A AC servomotor 1

Complementary
Range compatibilityLexium 32; Lexium 05
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current3.1 A
maximum continuous power0.97 W
Maximum current Irms11.9 A for LXM05AD17F1; 11.9 A for LXM05AD17M2; 11.9 A for LXM05AD17M3X; 11.9 A for LXM05BD17F1; 11.9 A for LXM05BD17M2; 11.9 A for LXM05BD17M3X; 11.9 A for LXM05CD17F1; 11.9 A for LXM05CD17M2; 11.9 A for LXM05CD17M3X; 10 A for LXM32.D18M2; 9 A for LXM32.U90M2
Maximum permanent current11.9 A
Switching frequency8 kHz
Second shaftWithout second shaft end
Shaft diameter9 mm
Shaft length20 mm
Feedback typeSingle turn SinCos Hiperface
Motor flange size55 mm
Number of motor stacks3
Torque constant0.39 N.m/A at 120 °C
Back emf constant22 V/krpm at 120 °C
Number of motor poles3.0
Rotor inertia0.134 kg.cm²
Stator resistance3.1 Ohm at 20 °C
Stator inductance3.9 mH at 20 °C
Stator electrical time constant2.39 ms at 20 °C
Maximum radial force Fr190 N at 8000 rpm; 200 N at 7000 rpm; 210 N at 6000 rpm; 230 N at 5000 rpm; 240 N at 4000 rpm; 270 N at 3000 rpm; 310 N at 2000 rpm; 390 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Type of coolingNatural convection
Length176.5 mm
Centring collar diameter40 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes63 mm
Net weight1.76 kg
Sizing referenceBSH0553T
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak11.9 A
Inertia0.0 kg.cm² of brake; 0.134 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed9000 rpm
Product compatibilityLXM05AD17F1 at 110...120 V single phase; LXM05AD17M2 at 200...240 V single phase; LXM05BD17F1 at 110...120 V single phase; LXM05BD17M2 at 200...240 V single phase; LXM05CD17F1 at 110...120 V single phase; LXM05CD17M2 at 200...240 V single phase; LXM32.U90M2 at 230 V single phase; LXM32.D18M2 at 115 V single phase; LXM05AD17M3X at 200...240 V three phase; LXM05BD17M3X at 200...240 V three phase; LXM05CD17M3X at 200...240 V three phase
Shaft endUntapped
IP degree of protectionIP65 standard; IP67 with IP67 kit
Speed feedback resolution131072 points/turn
Holding brakeWithout
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height12.3 cm
Package 1 Width12.8 cm
Package 1 Length37.7 cm
Package 1 Weight1.4 kg
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.2 Nm and achieves a peak torque of 3.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 970 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing conforms to protection class IP65. There is no holding brake. The Lexium LXM32 series servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/291108
qrcode für Schneider Electric BSH0553T21A2A AC servomotor 1