| Complementary |
| Range compatibility | Lexium 32; Lexium 15; Lexium 05 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 1.7 A |
| maximum continuous power | 0.97 W |
| Maximum current Irms | 8.7 A for LXM15LD13M3; 8.7 A for LXM15LD10N4; 6.5 A for LXM05AD10M2; 6.5 A for LXM05AD10M3X; 6.5 A for LXM05AD14N4; 6.5 A for LXM05BD10M2; 6.5 A for LXM05BD10M3X; 6.5 A for LXM05BD14N4; 6.5 A for LXM05CD10M2; 6.5 A for LXM05CD10M3X; 6.5 A for LXM05CD14N4; 6 A for LXM32.U60N4 |
| Maximum permanent current | 6.5 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Key width | 12 mm |
| Feedback type | Multiturn SinCos Hiperface |
| Holding torque | 0.8 N.m holding brake |
| Motor flange size | 55 mm |
| Number of motor stacks | 3 |
| Torque constant | 0.7 N.m/A at 120 °C |
| Back emf constant | 41 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.1553 kg.cm² |
| Stator resistance | 10.4 Ohm at 20 °C |
| Stator inductance | 13.02 mH at 20 °C |
| Stator electrical time constant | 2.4 ms at 20 °C |
| Maximum radial force Fr | 190 N at 8000 rpm; 200 N at 7000 rpm; 210 N at 6000 rpm; 230 N at 5000 rpm; 240 N at 4000 rpm; 270 N at 3000 rpm; 310 N at 2000 rpm; 390 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 10 W |
| Type of cooling | Natural convection |
| Length | 203 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.9 kg |
| Sizing reference | BSH0553P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 6.5 A |
| Inertia | 0.021 kg.cm² of brake; 0.134 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 9000 rpm |
| Shaft end | Keyed |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.5 cm |
| Package 1 Width | 19 cm |
| Package 1 Length | 39.5 cm |
| Package 1 Weight | 2.417 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 30 cm |
| Package 2 Width | 40 cm |
| Package 2 Length | 60 cm |
| Package 2 Weight | 14.502 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 12 |
| Package 3 Height | 77 cm |
| Package 3 Width | 80 cm |
| Package 3 Length | 60 cm |
| Package 3 Weight | 37.504 kg |
The BSH0553P32F2A servo motor from Schneider Electric is a three-phase AC servo motor of the Lexium 32 series, designed for dynamic applications in industrial automation. It features a low rotor inertia, enabling high acceleration capability, and combines a compact design with high power density through special winding technology. The motor is designed for use with servo amplifiers from the Lexium series LXM32, LXM15, and LXM05, and is suitable for precise positioning and motion control applications in machine building, packaging technology, or robotics.
Applications
The BSH0553P32F2A is suitable for applications requiring high dynamics, precise positioning, and a robust construction. The maximum mechanical speed is 9000 rpm, with a rated power of up to 970 W at a supply voltage of 480 V. The nominal continuous standstill torque is 1.2 Nm, and the peak torque is 3.5 Nm. The integrated holding brake with a holding torque of 0.8 Nm ensures safe positioning at standstill. The IP65 protection rating provides protection against dust and splashing water, making the motor suitable for use in industrial environments with increased contamination risk. Optionally, the protection rating can be increased to IP67 if the IP 67 set is used.
Features and Equipment in Detail
The motor features an integrated multiturn encoder with SinCos-Hiperface technology, providing a resolution of 131072 points per revolution and 4096 revolutions. This ensures high positioning accuracy with an angular accuracy error of 1.4 °. The electrical connection is made via two rotatable M23 angled connectors, offset by 90°, enabling flexible mounting and cable routing. The drive shaft has a diameter of 9 mm, a length of 20 mm, and is equipped with a keyway. The keyway width is 12 mm. Mounting is done via an international standard flange with a diameter of 55 mm, four mounting holes with a diameter of 5.5 mm, and a bolt circle diameter of 63 mm.
Technology Explained Simply
The motor's winding technology enables higher power density, meaning more power is packed into a more compact housing. The torque constant is 0.7 Nm/A at a copper temperature of 120 °C, describing the motor's efficiency under load. The back-EMF constant is 41 V/krpm, indicating the electrical back reaction during rotation. The stator resistance is 10.4 Ohm at 20 °C, and the stator inductance is 13.02 mH, describing the electrical properties of the stator. Cooling is achieved through natural convection, enabling a maintenance-free operation. The maximum radial force is up to 390 N at 1000 rpm, and the maximum axial force is 0.2 times the radial force.
Compatibility and Accessories
The motor is compatible with servo amplifiers from the Lexium series LXM32, LXM15, and LXM05. Accessories include, for example, brake resistors such as the VW3A7704 or motor cables such as the VW3M5101R150, ensuring safe and reliable power supply and braking function. Additionally, encoder options such as the VW3M3402 Digital Encoder Option Module can be used for extended feedback. Combining the motor with gearboxes such as the GBX060005K allows adaptation of speed and torque to specific requirements.
Mounting and Installation
Mounting is done via the standard flange with a diameter of 55 mm. The four mounting holes with a diameter of 5.5 mm and a bolt circle diameter of 63 mm allow for secure fastening. The rotatable M23 angled connectors facilitate cable routing. The centring rings with a diameter of 40 mm and a depth of 2 mm support precise alignment. The total length of the motor is 203 mm, and the product weight is 1.9 kg.
Operational Advantages
The BSH0553P32F2A offers high dynamics due to low rotor inertia, precise positioning via the multiturn encoder, and a robust construction with IP65 protection rating. The integrated holding brake ensures safe positioning at standstill. Compatibility with various servo amplifiers from the Lexium series enables flexible integration into existing systems. Natural convection cooling reduces maintenance requirements. The high power density in a compact design optimizes space requirements in machines and systems.