| Complementary |
| Range compatibility | Lexium 15; Lexium 32; Lexium 05 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 1.7 A |
| maximum continuous power | 0.97 W |
| Maximum current Irms | 8.7 A for LXM15LD13M3; 8.7 A for LXM15LD10N4; 6.5 A for LXM05AD10M2; 6.5 A for LXM05AD10M3X; 6.5 A for LXM05AD14N4; 6.5 A for LXM05BD10M2; 6.5 A for LXM05BD10M3X; 6.5 A for LXM05BD14N4; 6.5 A for LXM05CD10M2; 6.5 A for LXM05CD10M3X; 6.5 A for LXM05CD14N4; 6 A for LXM32.U60N4 |
| Maximum permanent current | 6.5 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Key width | 12 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 0.8 N.m holding brake |
| Motor flange size | 55 mm |
| Number of motor stacks | 3 |
| Torque constant | 0.7 N.m/A at 120 °C |
| Back emf constant | 41 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.1553 kg.cm² |
| Stator resistance | 10.4 Ohm at 20 °C |
| Stator inductance | 13.02 mH at 20 °C |
| Stator electrical time constant | 2.4 ms at 20 °C |
| Maximum radial force Fr | 190 N at 8000 rpm; 200 N at 7000 rpm; 210 N at 6000 rpm; 230 N at 5000 rpm; 240 N at 4000 rpm; 270 N at 3000 rpm; 310 N at 2000 rpm; 390 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 10 W |
| Type of cooling | Natural convection |
| Length | 203 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.9 kg |
| Sizing reference | BSH0553P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 6.5 A |
| Inertia | 0.021 kg.cm² of brake; 0.134 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 9000 rpm |
| Shaft end | Keyed |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 12.3 cm |
| Package 1 Width | 12.8 cm |
| Package 1 Length | 37.7 cm |
| Package 1 Weight | 1.55 kg |
The BSH0553P31F2A servo motor from Schneider Electric is a three-phase AC servo motor of the BSH series, specifically designed for use in industrial drive systems. It is part of the Lexium servo drive series and features a compact design and high power density, achieved through a special winding technology. The motor is designed for dynamic applications requiring high acceleration capability, supported by a low rotor inertia moment of 0.1553 kg.cm². The maximum mechanical speed is 9000 rpm, with the rated power reaching up to 970 W at a supply voltage of 480 V. The motor includes an integrated holding brake with a holding torque of 0.8 Nm, ensuring the load remains held when stationary.
Applications
The BSH0553P31F2A is suitable for applications in automation technology, such as in machine building, packaging technology, or robotics, where precise positioning and high dynamics are required. The integrated holding brake enables safe positioning even in the event of a power failure, which is advantageous in safety-critical processes. The IP65 protection rating provides high protection against dust and splashing water, making the motor suitable for use in industrial environments with increased contamination risk. Optionally, the protection rating can be upgraded to IP67 by using an IP 67 set, enabling use in outdoor or humid environments.
Features and Equipment in Detail
The motor features an integrated SinCos Hiperface single-turn encoder with a resolution of 131072 points per revolution, ensuring high positioning accuracy. The accuracy error is 1.4 °, which is sufficient for precise drive control. The drive shaft has a diameter of 9 mm and is equipped with a keyway, enabling a secure mechanical connection to drive accessories. The shaft length is 20 mm, and the key width is 12 mm. The electrical connection is made via two rotatable angled connectors (M23), bent at 90°, allowing flexible mounting and cable routing.
Technology Explained Simply
The motor's winding technology enables higher power density, meaning the motor can deliver high power despite its compact design. The torque constant is 0.7 Nm/A at a temperature of 120 °C, describing the motor's efficiency under load conditions. The back-EMF constant is 41 V/krpm at 120 °C, describing the electrical back reaction of the rotor during rotation. Cooling is achieved through natural convection, ensuring maintenance-free and reliable operation. The maximum radial force varies with speed between 190 N (at 8000 rpm) and 390 N (at 1000 rpm), with the maximum axial force being 0.2 times the radial force.
Compatibility and Accessories
The servo motor is compatible with servo amplifiers from the Lexium families LXM15, LXM32, and LXM05. No additional adapters or conversions are required for operation with these drives. Available accessories include various motor cables (e.g. VW3M5101R15, VW3M5101R30) and encoder cables (e.g. VW3M8102R250), ensuring secure and interference-free signal transmission. Additionally, brake resistors (e.g. VW3A7608R07, VW3A7601R20) or gearboxes (e.g. GBY060012K) can be used to adapt drive performance to specific requirements.
Mounting and Installation
The motor is mounted using an international standard flange with a diameter of 55 mm. The mounting holes have a diameter of 5.5 mm and are arranged on a circle with a diameter of 63 mm. The number of mounting holes is 4, enabling stable fixation. The motor length is 203 mm, and the motor housing is designed for easy integration into existing machine constructions. The rotatable angled connectors facilitate cable routing and reduce mechanical stress on the connections.
Operational Advantages
The BSH0553P31F2A offers high operational reliability due to the integrated holding brake and robust construction. Natural convection cooling reduces maintenance requirements, and the high power density enables compact integration into machines. Compatibility with various Lexium servo amplifiers provides flexibility in system selection. The IP65 protection rating (optionally IP67) makes the motor suitable for diverse industrial operating conditions, including humid or dusty environments. The maximum continuous power is 0.97 W, and the continuous current at standstill is 1.7 A, describing energy efficiency under load and in standby operation.