| Complementary |
| Range compatibility | Lexium 05; Lexium 15; Lexium 32 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 1.7 A |
| maximum continuous power | 0.97 W |
| Maximum current Irms | 8.7 A for LXM15LD13M3; 8.7 A for LXM15LD10N4; 6.5 A for LXM05AD10M2; 6.5 A for LXM05AD10M3X; 6.5 A for LXM05AD14N4; 6.5 A for LXM05BD10M2; 6.5 A for LXM05BD10M3X; 6.5 A for LXM05BD14N4; 6.5 A for LXM05CD10M2; 6.5 A for LXM05CD10M3X; 6.5 A for LXM05CD14N4; 6 A for LXM32.U60N4 |
| Maximum permanent current | 6.5 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Key width | 12 mm |
| Feedback type | Multiturn SinCos Hiperface |
| Holding torque | 0.8 N.m holding brake |
| Motor flange size | 55 mm |
| Number of motor stacks | 3 |
| Torque constant | 0.7 N.m/A at 120 °C |
| Back emf constant | 41 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.1553 kg.cm² |
| Stator resistance | 10.4 Ohm at 20 °C |
| Stator inductance | 13.02 mH at 20 °C |
| Stator electrical time constant | 2.4 ms at 20 °C |
| Maximum radial force Fr | 190 N at 8000 rpm; 200 N at 7000 rpm; 210 N at 6000 rpm; 230 N at 5000 rpm; 240 N at 4000 rpm; 270 N at 3000 rpm; 310 N at 2000 rpm; 390 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 10 W |
| Type of cooling | Natural convection |
| Length | 203 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.9 kg |
| Sizing reference | BSH0553P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 6.5 A |
| Inertia | 0.021 kg.cm² of brake; 0.134 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 9000 rpm |
| Shaft end | Keyed |
| IP degree of protection | IP50 standard |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 12.3 cm |
| Package 1 Width | 12.8 cm |
| Package 1 Length | 37.7 cm |
| Package 1 Weight | 1.55 kg |
The BSH0553P12F2A servo motor from Schneider Electric is a three-phase AC servo motor of the BSH series, specifically designed for use in industrial drive systems. It is part of the Lexium 32 servo drive series and features a compact design and high power density, achieved through a special winding technology. The motor is suitable for dynamic applications requiring high acceleration capability, supported by a low rotor inertia of 0.1553 kg.cm². The maximum mechanical speed is 9000 rpm, with a rated power of up to 970 W at a supply voltage of 480 V. The motor includes an integrated holding brake with a holding torque of 0.8 Nm, ensuring the shaft remains positioned when stationary.
Applications
The BSH0553P12F2A is suitable for use in automated production systems, machine building, and material handling technology, where precise positioning and high dynamics are required. The combination of low inertia and high power density makes it particularly suitable for applications with fast motion cycles and high accelerations. The integrated holding brake enables safe positioning even in the event of a power failure, which is advantageous in safety-critical installations.
Functions and Equipment in Detail
The motor features a multiturn encoder with SinCos Hiperface technology, providing a resolution of 131072 points per revolution and 4096 revolutions. This ensures high positioning accuracy and enables precise feedback of angular position over multiple revolutions. The angular error accuracy is 1.4 °, which is sufficient for precise drive control. The electrical connection is made via two rotatable angled connectors with M23 connectors, bent at 90°, allowing flexible mounting and cable routing.
Technology Explained Simply
The motor's winding technology provides higher power density, meaning the motor can deliver more power in a compact form. The torque constant is 0.7 Nm/A at a copper temperature of 120 °C, describing the motor's efficiency under load conditions. The back-EMF constant is 41 V/krpm, indicating the electrical feedback from rotational movement. Cooling is achieved through natural convection, increasing maintenance friendliness. The maximum radial force varies with speed between 190 N (at 8000 rpm) and 390 N (at 1000 rpm), while the maximum axial force is 20 % of the radial force.
Compatibility and Accessories
The motor is compatible with servo amplifiers from the Lexium series, particularly models LXM05, LXM15, and LXM32. For connection to the drive system, various motor cables are available, such as VW3M5101R150 (15 m) or VW3M5101R30 (3 m), equipped with a cross-section of 4x1.5+2x1. Additionally, safety cables such as VW3M8801R30 or signal cables such as VW3M8223R30 are available to facilitate integration into existing control systems. For mechanical adaptation, gearboxes such as GBX060015K (PLE060, I=15) or right-angle gearboxes such as GBY060012K (reduction ratio 12:1) can be used.
Mounting and Installation
The motor is mounted via an international standard flange with a diameter of 55 mm. The mounting holes have a diameter of 5.5 mm and are arranged on a circle with a diameter of 63 mm. The drive shaft has a diameter of 9 mm and a length of 20 mm, with the shaft end equipped with a keyway (width 12 mm). The protection rating of the motor housing is IP65, which is dust- and water-tight, making it suitable for outdoor use. The protection rating of the shaft end is IP54, providing protection against dust and splashing water.
Operational Advantages
The motor offers high operational reliability due to the integrated holding brake and robust construction. Natural convection cooling reduces maintenance effort, and the rotatable angled connectors allow flexible cable routing. The high positioning accuracy provided by the multiturn encoder and the high acceleration capability due to the low rotor inertia make the motor a reliable solution for demanding drive tasks. Compatibility with the Lexium series ensures easy integration into existing control systems.