Schneider Electric BSH0553P11F2A, EAN: 3389118159327

Schneider Electric BSH0553P11F2A AC servomotor 1

Industrial Material > Engines and accessories

Schneider Electric BSH0553P11F2A AC servomotor 1

Lieske Part No. 151276
Mfg Part No BSH0553P11F2A
EAN-Code 3389118159327
Manufacturer Schneider Electric
Here only 1.274,57 EUR
1.516,74 EUR incl. VAT

Further information for Schneider Electric BSH0553P11F2A AC servomotor 1

Complementary
Range compatibilityLexium 05; Lexium 15; Lexium 32
supply voltage max480 V
Network number of phasesThree phase
Continuous stall current1.7 A
maximum continuous power0.97 W
Maximum current Irms8.7 A for LXM15LD13M3; 8.7 A for LXM15LD10N4; 6.5 A for LXM05AD10M2; 6.5 A for LXM05AD10M3X; 6.5 A for LXM05AD14N4; 6.5 A for LXM05BD10M2; 6.5 A for LXM05BD10M3X; 6.5 A for LXM05BD14N4; 6.5 A for LXM05CD10M2; 6.5 A for LXM05CD10M3X; 6.5 A for LXM05CD14N4; 6 A for LXM32.U60N4
Maximum permanent current6.5 A
Switching frequency8 kHz
Second shaftWithout second shaft end
Shaft diameter9 mm
Shaft length20 mm
Key width12 mm
Feedback typeSingle turn SinCos Hiperface
Holding torque0.8 N.m holding brake
Motor flange size55 mm
Number of motor stacks3
Torque constant0.7 N.m/A at 120 °C
Back emf constant41 V/krpm at 120 °C
Number of motor poles3.0
Rotor inertia0.1553 kg.cm²
Stator resistance10.4 Ohm at 20 °C
Stator inductance13.02 mH at 20 °C
Stator electrical time constant2.4 ms at 20 °C
Maximum radial force Fr190 N at 8000 rpm; 200 N at 7000 rpm; 210 N at 6000 rpm; 230 N at 5000 rpm; 240 N at 4000 rpm; 270 N at 3000 rpm; 310 N at 2000 rpm; 390 N at 1000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power10 W
Type of coolingNatural convection
Length203 mm
Centring collar diameter40 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes63 mm
Net weight1.9 kg
Sizing referenceBSH0553P
Accuracy error [angular]1.4 °
Temperature copper hot120 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak6.5 A
Inertia0.021 kg.cm² of brake; 0.134 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBSH
Product or component typeServo motor
Maximum mechanical speed9000 rpm
Shaft endKeyed
IP degree of protectionIP50 standard
Speed feedback resolution131072 points/turn
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height12.3 cm
Package 1 Width12.8 cm
Package 1 Length37.7 cm
Package 1 Weight1.55 kg
The BSH0553P11F2A servo motor from Schneider Electric is a three-phase AC servo motor of the Lexium 32 series, specifically designed for dynamic applications with high demands on acceleration and precision. It features a low rotor inertia, enabling fast response and high acceleration capability. The winding technology ensures high power density in a compact design, allowing the motor to be space-saving despite its performance. With a maximum mechanical speed of 9000 rpm and a rated power of up to 970 W, it is suitable for demanding industrial processes. The integrated holding brake with a holding torque of 0.8 Nm ensures safe positioning of the drive when at rest.

Applications

The motor is suitable for applications in automation technology, particularly in machine building, packaging technology, printing and textile industries, as well as in robotic systems. The combination of high dynamics, precise positioning, and integrated brake makes it ideal for drives requiring high accuracy and rapid motion changes. The IP65 protection rating of the motor housing allows use in environments with increased humidity or dust exposure, while the shaft end with keyway and IP54 protection ensures a secure mechanical connection.

Functions and Equipment in Detail

The motor features an integrated SinCos Hiperface single-turn encoder with a resolution of 131072 points per revolution, enabling high positioning accuracy. The accuracy deviation is 1.4 °, which is sufficient for precise motion control in industrial plants. The electrical connection is made via two rotatable M23 angled connectors, bent at 90°, allowing flexible mounting and cable routing. The drive shaft has a diameter of 9 mm and a length of 20 mm, with the shaft end featuring a keyway. Mounting is done via an international standard flange with a diameter of 55 mm, four mounting holes with 5.5 mm diameter, and a bolt circle diameter of 63 mm.

Technology Explained Simply

The torque constant is 0.7 Nm/A at a temperature of 120 °C, describing the motor's efficiency under load conditions. The back-EMF constant is 41 V/krpm, indicating the electrical feedback during rotation. The stator inductance is 13.02 mH, and the stator resistance is 10.4 Ohm at 20 °C. The electrical time constant of the stator is 2.4 ms, influencing the motor's response speed during load changes. Cooling is achieved through natural convection, eliminating the need for additional fans or cooling devices.

Compatibility and Accessories

The motor is compatible with servo amplifiers from the Lexium 05, Lexium 15, and Lexium 32 product families. Corresponding control devices are required for operation with these drives. As accessories, various motor cables (e.g. VW3M5101R100, VW3M5101R50) and brake resistors (e.g. VW3A7604R30, VW3A7604R07) are available, depending on the application configuration. Additionally, gearboxes such as GBX060003K (PLE060 I=3) or GBX060004K (PLE060 I=4) are mentioned as combination options to reduce speed and increase torque.

Mounting and Installation

Mounting is done via the standard flange with 55 mm diameter and four holes on a bolt circle diameter of 63 mm. The rotatable connectors allow flexible cable connections, facilitating installation in confined spaces. The maximum radial force is up to 390 N at 1000 rpm, with the axial force being up to 0.2 times the radial force. The maximum continuous power is 0.97 W, and the continuous current at standstill is 1.7 A. The maximum supply voltage is 480 V for a 3-phase supply.

Advantages in Operation

The motor is characterised by high dynamics, precise positioning, and an integrated brake. The combination of low rotor inertia and high power density enables fast movements and high accelerations. Natural convection cooling reduces maintenance requirements, and the IP65 protection rating of the housing and IP54 of the shaft end increase operational safety in various environments. Compatibility with the Lexium series ensures easy integration into existing control systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/151276
qrcode für Schneider Electric BSH0553P11F2A AC servomotor 1