| Complementary |
| Range compatibility | Lexium 05; Lexium 15; Lexium 32 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 2.2 A |
| maximum continuous power | 0.67 W |
| Maximum current Irms | 6 A for LXM32.U90M2 at 115 V; 8.8 A for LXM32.U90M2 at 230 V; 10.3 A for LXM15LD13M3; 8.8 A for LXM05AD10F1; 8.8 A for LXM05AD17F1; 8.8 A for LXM05CU70M2; 8.8 A for LXM05AD10M2; 8.8 A for LXM05AD10M3X; 8.8 A for LXM05BD10F1 at 230 V; 8.8 A for LXM05BD17F1; 8.8 A for LXM05BD10M2; 8.8 A for LXM05BD10M3X; 8.8 A for LXM05CD10F1; 8.8 A for LXM05CD17F1; 8.8 A for LXM05CD10M2; 8.8 A for LXM05CD10M3X |
| Maximum permanent current | 8.8 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 0.8 N.m holding brake |
| Motor flange size | 55 mm |
| Number of motor stacks | 2 |
| Torque constant | 0.36 N.m/A at 120 °C |
| Back emf constant | 22 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.1173 kg.cm² |
| Stator resistance | 5.2 Ohm at 20 °C |
| Stator inductance | 5.45 mH at 20 °C |
| Stator electrical time constant | 2.04 ms at 20 °C |
| Maximum radial force Fr | 190 N at 7000 rpm; 190 N at 8000 rpm; 200 N at 6000 rpm; 220 N at 5000 rpm; 230 N at 4000 rpm; 260 N at 3000 rpm; 290 N at 2000 rpm; 370 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 10 W |
| Type of cooling | Natural convection |
| Length | 181 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.6 kg |
| Sizing reference | BSH0552T |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 8.8 A |
| Inertia | 0.021 kg.cm² of brake; 0.096 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 9000 rpm |
| Shaft end | Untapped |
| IP degree of protection | IP50 standard |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Straight connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 12.300 cm |
| Package 1 Width | 12.800 cm |
| Package 1 Length | 37.700 cm |
| Package 1 Weight | 1.250 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 30 cm |
| Package 2 Width | 40 cm |
| Package 2 Length | 60 cm |
| Package 2 Weight | 4.532 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 8 |
| Package 3 Height | 45.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 30.128 kg |
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.8 Nm and achieves a peak torque of 2.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 670 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and compliant with protection class IP54. The motor housing has protection class IP65. A holding brake is integrated. The Lexium LXM32 series servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.