| Complementary |
| Range compatibility | Lexium 32; Lexium 15 |
| supply voltage max | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 0.73 A |
| maximum continuous power | 0.45 W |
| Maximum current Irms | 3.5 A for LXM15LD13M3; 3.5 A for LXM15LU60N4; 2.9 A for LXM32.U60N4 |
| Maximum permanent current | 2.9 A |
| Switching frequency | 8 kHz |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Key width | 12 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 0.8 N.m holding brake |
| Motor flange size | 55 mm |
| Number of motor stacks | 1 |
| Torque constant | 0.68 N.m/A at 120 °C |
| Back emf constant | 40 V/krpm at 120 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.083 kg.cm² |
| Stator resistance | 41.8 Ohm at 20 °C |
| Stator inductance | 37.13 mH at 20 °C |
| Stator electrical time constant | 1.09 ms at 20 °C |
| Maximum radial force Fr | 170 N at 8000 rpm; 180 N at 7000 rpm; 190 N at 6000 rpm; 200 N at 5000 rpm; 220 N at 4000 rpm; 240 N at 3000 rpm; 270 N at 2000 rpm; 340 N at 1000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 10 W |
| Type of cooling | Natural convection |
| Length | 159 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.3 kg |
| Sizing reference | BSH0551P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 120 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 2.9 A |
| Inertia | 0.021 kg.cm² of brake; 0.059 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BSH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 9000 rpm |
| Continuous stall torque | 0.5 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.5 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.5 N.m for LXM15LD13M3, 230 V, single phase; 0.5 N.m for LXM15LU60N4, 230 V, three phase |
| Peak stall torque | 1.5 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 1.5 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 1.4 N.m for LXM15LD13M3, 230 V, single phase; 1.4 N.m for LXM15LU60N4, 230 V, three phase |
| Nominal output power | 300 W for LXM32.U60N4 at 1.5 A, 400 V, three phase; 300 W for LXM32.U60N4 at 1.5 A, 480 V, three phase; 170 W for LXM15LD13M3, 230 V, single phase; 170 W for LXM15LU60N4, 230 V, three phase |
| Nominal torque | 0.48 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.48 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.46 N.m for LXM15LD13M3, 230 V, single phase; 0.46 N.m for LXM15LU60N4, 230 V, three phase |
| Nominal speed | 6000 rpm for LXM32.U60N4 at 1.5 A, 400 V, three phase; 6000 rpm for LXM32.U60N4 at 1.5 A, 480 V, three phase; 4000 rpm for LXM15LD13M3, 230 V, single phase; 4000 rpm for LXM15LU60N4, 230 V, three phase |
| Product compatibility | LXM15LD13M3 at 230 V single phase; LXM15LU60N4 at 230 V three phase; LXM32.U60N4 at 400 V three phase; LXM32.U60N4 at 480 V three phase |
| Shaft end | Keyed |
| IP degree of protection | IP50 standard |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Straight connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.5 cm |
| Package 1 Width | 19.0 cm |
| Package 1 Length | 39.5 cm |
| Package 1 Weight | 1.7 kg |
BSH servo motor from the Lexium 32 servo drive series. This BSH series of three-phase AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 440 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is designed with a key and complies with protection class IP54. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.