| Complementary |
| Centring collar depth | 3 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 125.86 mm |
| Electrical connection | Connector |
| Feedback type | Index pulse |
| Speed feedback resolution | 10000 points/turn |
| Holding brake | With |
| Shaft end | Parallel key |
| Second shaft | Without second shaft end |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Nominal torque | 12 N.m |
| Peak stall torque | 11.42 N.m |
| Continuous stall torque | 11.42 N.m |
| Holding torque | 13.5 N.m |
| Rotor inertia | 10.5 kg.cm² |
| Resolution | 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution; 1000 points/turn |
| Accuracy error | +/- 6 arc min |
| Maximum starting frequency | 4.7 kHz |
| [In] rated current | 4.1 A |
| Resistance | 1.8 Ohm (winding) |
| Time constant | 22 ms |
| Maximum radial force Fr | 150 N (second shaft end); 300 N (first shaft end) |
| Maximum axial force Fa | 330 N (tensile force); 60 N (force pressure) |
| Service life in hours | 20000 h (bearing) |
| Angular acceleration | 200000 rad/s² |
| Net weight | 8.2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 60072-1; IEC 50347 |
| Type of cooling | Natural convection |
| Ambient air temperature for operation | -25…40 °C |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² maximum; A conforming to IEC 60034-14 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP56 total except shaft bushing: conforming to IEC 60034-5 |
| Temperature class | F winding conforming to IEC 60034-1 |
| Main |
| Range compatibility | Lexium SD3 |
| Product or component type | Motion control motor |
| Device short name | BRS3 |
| Maximum mechanical speed | 3000 rpm |
| Motor type | 3-phase stepper motor |
| Number of motor poles | 6 |
| Supply voltage limits | 230 V AC; 325 V DC |
| Mounting support | Flange |
| Motor flange size | 110 mm |
| Length | 180 mm |
| Centring collar diameter | 56 mm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 19.000 cm |
| Package 1 Width | 22.000 cm |
| Package 1 Length | 40.000 cm |
| Package 1 Weight | 11.338 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 80.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 98.704 kg |
Three-phase stepper motor from the Lexium BRS3 series. This motor series is characterized by its robust design and optimized internal geometry, which ensure a very powerful stepper motor and minimize maintenance costs. This motor has a holding torque of 13.5 Nm. The flange size is 110 mm, the motor length is 180 mm and the centering collar is 56 mm. The shaft has a diameter of 19 mm, has a feather key and the shaft end protection class is IP41. The motor housing has protection class IP56. An encoder with 1000 pulses/revolution is installed. The nominal supply voltage is 325 VDC and the connection is made via connectors. This motor is equipped with a mounted holding brake at the factory. Movements are carried out precisely, step by step, which are defined by a Lexium SD326 or SD328 stepper motor amplifier and are thus perfectly coordinated.