Schneider Electric BRS3ACW850ABB, EAN: 3389119224161

Schneider Electric BRS3ACW850ABB stepper motor 3ph 13.5 Nm

Industrial Material > Engines and accessories

Schneider Electric BRS3ACW850ABB stepper motor 3ph 13.5 Nm

Lieske Part No. 1565735
Mfg Part No BRS3ACW850ABB
EAN-Code 3389119224161
Manufacturer Schneider Electric
Here only 1.413,32 EUR
1.681,85 EUR incl. VAT

Further information for Schneider Electric BRS3ACW850ABB stepper motor 3ph 13.5 Nm

Complementary
Centring collar depth3 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes125.86 mm
Electrical connectionTerminal box
Holding brakeWithout
Shaft endParallel key
Second shaftWith second shaft end
Shaft diameter19 mm
Shaft length40 mm
Nominal torque12 N.m
Peak stall torque11.42 N.m
Continuous stall torque11.42 N.m
Holding torque13.5 N.m
Rotor inertia10.5 kg.cm²
Resolution1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
Accuracy error+/- 6 arc min
Maximum starting frequency4.7 kHz
[In] rated current4.1 A
Resistance1.8 Ohm (winding)
Time constant22 ms
Maximum radial force Fr150 N (second shaft end); 300 N (first shaft end)
Maximum axial force Fa330 N (tensile force); 60 N (force pressure)
Service life in hours20000 h (bearing)
Angular acceleration200000 rad/s²
Net weight8.2 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 50347; IEC 60072-1
Type of coolingNatural convection
Ambient air temperature for operation-25…40 °C
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² maximum; A conforming to IEC 60034-14
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP56 total except shaft bushing: conforming to IEC 60034-5
Temperature classF winding conforming to IEC 60034-1
Main
Range compatibilityLexium SD3
Product or component typeMotion control motor
Device short nameBRS3
Maximum mechanical speed3000 rpm
Motor type3-phase stepper motor
Number of motor poles6
Supply voltage limits230 V AC; 325 V DC
Mounting supportFlange
Motor flange size110 mm
Length180 mm
Centring collar diameter56 mm
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height13.0 cm
Package 1 Width19.0 cm
Package 1 Length39.5 cm
Package 1 Weight8.4 kg
Three-phase stepper motor from the Lexium BRS3 series. This motor series is characterized by its robust design and optimized internal geometry, which ensure a very powerful stepper motor and minimize maintenance costs. This motor has a holding torque of 13.5 Nm. The flange size is 110 mm, the motor length is 180 mm and the centering collar is 56 mm. The shaft has a diameter of 19 mm, has a feather key and the shaft end protection class is IP41. The motor housing has protection class IP56. The motor has a second shaft end for the drive coupling. There is no encoder. The nominal supply voltage is 325 VDC and the connection is made via a terminal box. A holding brake is not installed on this motor. Movements are carried out precisely, step by step, which are defined by a Lexium SD326 or SD328 stepper motor amplifier and are thus perfectly coordinated.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1565735
qrcode für Schneider Electric BRS3ACW850ABB stepper motor 3ph 13.5 Nm