| Complementary |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 6.5 mm |
| Circle diameter of the mounting holes | 98.99 mm |
| Electrical connection | Terminal box |
| Holding brake | Without |
| Shaft end | Woodruff key |
| Second shaft | Without second shaft end |
| Shaft diameter | 14 mm |
| Shaft length | 30 mm |
| Nominal torque | 6 N.m |
| Peak stall torque | 5.78 N.m |
| Continuous stall torque | 5.78 N.m |
| Holding torque | 6.78 N.m |
| Rotor inertia | 3.3 kg.cm² |
| Resolution | 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution |
| Accuracy error | +/- 6 arc min |
| Maximum starting frequency | 5.3 kHz |
| [In] rated current | 2.25 A |
| Resistance | 6.5 Ohm (winding) |
| Time constant | 10 ms |
| Maximum radial force Fr | 110 N (first shaft end); 50 N (second shaft end) |
| Maximum axial force Fa | 175 N (tensile force); 30 N (force pressure) |
| Service life in hours | 20000 h (bearing) |
| Angular acceleration | 200000 rad/s² |
| Net weight | 4.3 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 60072-1; IEC 50347 |
| Type of cooling | Natural convection |
| Ambient air temperature for operation | -25…40 °C |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² maximum; A conforming to IEC 60034-14 |
| IP degree of protection | IP56 shaft bushing: conforming to IEC 60034-5; IP56 total except shaft bushing: conforming to IEC 60034-5 |
| Temperature class | F winding conforming to IEC 60034-1 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | Lexium SD3 |
| Product or component type | Motion control motor |
| Device short name | BRS3 |
| Maximum mechanical speed | 3000 rpm |
| Motor type | 3-phase stepper motor |
| Number of motor poles | 6 |
| Supply voltage limits | 230 V AC; 325 V DC |
| Mounting support | Flange |
| Motor flange size | 85 mm |
| Length | 171 mm |
| Centring collar diameter | 73 mm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 22.0 cm |
| Package 1 Width | 19.5 cm |
| Package 1 Length | 38.5 cm |
| Package 1 Weight | 4.0 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 77.0 cm |
| Package 2 Width | 80.0 cm |
| Package 2 Length | 60.0 cm |
| Package 2 Weight | 56.5 kg |
Three-phase stepper motor from the Lexium BRS3 series. This motor series is characterized by its robust design and optimized internal geometry, which ensure a very powerful stepper motor and minimize maintenance costs. This motor has a holding torque of 6.78 Nm. The flange size is 85 mm, the motor length is 128 mm and the centering collar is 73 mm. The shaft has a diameter of 14 mm and is equipped with a disc spring. The shaft end and the motor housing have protection class IP56. There is no encoder. The nominal supply voltage is 325 VDC and the connection is made via a terminal box. A holding brake is not installed on this motor. Movements are carried out precisely, step by step, which are defined by a Lexium SD326 or SD328 stepper motor amplifier and are thus perfectly coordinated.