| Complementary |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 6.5 mm |
| Circle diameter of the mounting holes | 98.99 mm |
| Electrical connection | Connector |
| Holding brake | Without |
| Shaft end | Woodruff key |
| Second shaft | Without second shaft end |
| Shaft diameter | 12 mm |
| Shaft length | 30 mm |
| Nominal torque | 4 N.m |
| Holding torque | 4.8 N.m |
| Rotor inertia | 2.2 kg.cm² |
| Resolution | 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution |
| Accuracy error | +/- 6 arc min |
| Maximum starting frequency | 5.3 kHz |
| [In] rated current | 5.8 A |
| Resistance | 0.55 Ohm (winding) |
| Time constant | 9 ms |
| Maximum radial force Fr | 110 N (first shaft end); 50 N (second shaft end) |
| Maximum axial force Fa | 175 N (tensile force); 30 N (force pressure) |
| Service life in hours | 20000 h (bearing) |
| Angular acceleration | 200000 rad/s² |
| Net weight | 3.2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 60072-1; IEC 50347 |
| Type of cooling | Natural convection |
| Ambient air temperature for operation | -25…40 °C |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² maximum; A conforming to IEC 60034-14 |
| IP degree of protection | IP56 total except shaft bushing: conforming to IEC 60034-5; IP41 shaft bushing without shaft seal ring: conforming to IEC 60034-5 |
| Temperature class | F winding conforming to IEC 60034-1 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range compatibility | Lexium SD3 |
| Product or component type | Motion control motor |
| Device short name | BRS3 |
| Maximum mechanical speed | 3000 rpm |
| Motor type | 3-phase stepper motor |
| Number of motor poles | 6 |
| Supply voltage limits | 230 V AC; 325 V DC |
| Mounting support | Flange |
| Motor flange size | 85 mm |
| Length | 141 mm |
| Centring collar diameter | 60 mm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 22 cm |
| Package 1 Width | 19 cm |
| Package 1 Length | 40 cm |
| Package 1 Weight | 4.18 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 73.5 cm |
| Package 2 Width | 60 cm |
| Package 2 Length | 80 cm |
| Package 2 Weight | 55.912 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 12 |
| Package 3 Height | 77 cm |
| Package 3 Width | 80 cm |
| Package 3 Length | 60 cm |
| Package 3 Weight | 58.66 kg |
Three-phase stepper motor from the Lexium BRS3 series. This motor series is characterized by its robust design and optimized internal geometry, which ensure a very powerful stepper motor and minimize maintenance costs. This motor has a holding torque of 4.52 Nm. The flange size is 85 mm, the motor length is 98 mm and the centering collar is 60 mm. The shaft has a diameter of 12 mm, is equipped with a disc spring and the protection class of the shaft end is IP41. The motor housing has protection class IP56. There is no encoder. The nominal supply voltage is 325 VDC and the connection is made via connectors. A holding brake is not installed on this motor. Movements are carried out precisely, step by step, which are defined by a Lexium SD326 or SD328 stepper motor amplifier and are thus perfectly coordinated.