| Complementary |
| Maximum mechanical speed | 1800 rpm |
| Supply voltage limits | 12…48 V DC |
| Mounting support | Flange |
| Motor flange size | 86 mm |
| Length | 120 mm |
| Number of motor stacks | 3 |
| Centring collar diameter | 73 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 98.4 mm |
| Electrical connection | Flying lead |
| Holding brake | Without |
| Shaft end | Smooth shaft |
| Second shaft | Without second shaft end |
| Shaft diameter | 14 mm |
| Shaft length | 35 mm |
| Holding torque | 9.2 N.m |
| Rotor inertia | 3.4 kg.cm² |
| Resolution | 200 steps number of full steps per revolution; 1.8 ° step angle |
| [In] rated current | 6.3 A |
| Resistance | 0.5 Ohm (winding) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Ambient air temperature for operation | -25…40 °C |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| IP degree of protection | IP20 conforming to IEC/EN 60034-1 |
| Temperature class | B winding conforming to IEC/EN 60034-1 |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range compatibility | Lexium SD2 |
| Product or component type | Motion control motor |
| Device short name | BRS2 |
| Motor type | 2-phase stepper motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.500 cm |
| Package 1 Width | 8.500 cm |
| Package 1 Length | 16.500 cm |
| Package 1 Weight | 3.704 kg |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 3 |
| Package 2 Height | 17.000 cm |
| Package 2 Width | 27.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 11.689 kg |
| Unit Type of Package 3 | S06 |
| Number of Units in Package 3 | 24 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 103.512 kg |
Two-phase stepper motor from the Lexium BRS2 series. This motor series is characterized by its robust construction and enables very quiet and almost resonance-free operation. This motor has a holding torque of 9.2 Nm. The flange size is 85 mm. The motor consists of three power levels. The phase current is up to 6 A. Movements are carried out precisely, step by step, which are defined by a Lexium SD2 stepper motor amplifier and are thus perfectly coordinated.