Schneider Electric BRS2573A300, EAN: 3606480211133

Schneider Electric BRS2573A300 stepper motor 2-phase

Industrial Material > Engines and accessories

Schneider Electric BRS2573A300 stepper motor 2-phase

Lieske Part No. 718730
Mfg Part No BRS2573A300
EAN-Code 3606480211133
Manufacturer Schneider Electric
Here only 1.442,79 EUR
1.716,92 EUR incl. VAT

Further information for Schneider Electric BRS2573A300 stepper motor 2-phase

Complementary
Maximum mechanical speed1800 rpm
Supply voltage limits12…48 V DC
Mounting supportFlange
Motor flange size56.4 mm
Length76 mm
Number of motor stacks3
Centring collar diameter38 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5 mm
Circle diameter of the mounting holes66.6 mm
Electrical connectionFlying lead
Holding brakeWithout
Shaft endSmooth shaft
Second shaftWithout second shaft end
Shaft diameter6.35 mm
Shaft length19 mm
Holding torque1.69 N.m
Rotor inertia0.46 kg.cm²
Resolution200 steps number of full steps per revolution; 1.8 ° step angle
[In] rated current3 A
Resistance0.95 Ohm (winding)
Contractual warranty
Warranty (in months)18
Environment
Ambient air temperature for operation-25…40 °C
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
IP degree of protectionIP20 conforming to IEC/EN 60034-1
Temperature classB winding conforming to IEC/EN 60034-1
Logistical informations
Country of originUS
Main
Range compatibilityLexium SD2
Product or component typeMotion control motor
Device short nameBRS2
Motor type2-phase stepper motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height20.0 cm
Package 1 Width29.2 cm
Package 1 Length38.4 cm
Package 1 Weight1.109 kg
Unit Type of Package 2CAR
Number of Units in Package 210
Package 2 Height20.0 cm
Package 2 Width29.2 cm
Package 2 Length38.4 cm
Package 2 Weight11.098 kg
Unit Type of Package 3S06
Number of Units in Package 340
Package 3 Height73.5 cm
Package 3 Width60.0 cm
Package 3 Length80.0 cm
Package 3 Weight57.392 kg
Two-phase stepper motor from the Lexium BRS2 series. This motor series is characterized by its robust construction and enables very quiet and almost resonance-free operation. This motor has a holding torque of 1.69 Nm. The flange size is 57 mm. The motor consists of three power levels. The phase current is up to 3 A. Movements are carried out precisely, step by step, which are defined by a Lexium SD2 stepper motor amplifier and are thus perfectly coordinated.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/718730
qrcode für Schneider Electric BRS2573A300 stepper motor 2-phase