| Complementary |
| Maximum mechanical speed | 1800 rpm |
| Supply voltage limits | 12…48 V DC |
| Mounting support | Flange |
| Motor flange size | 42.3 mm |
| Length | 48 mm |
| Number of motor stacks | 3 |
| Centring collar diameter | 22 mm |
| Centring collar depth | 2.03 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 3 mm |
| Circle diameter of the mounting holes | 43.84 mm |
| Electrical connection | Flying lead |
| Holding brake | Without |
| Shaft end | Smooth shaft |
| Second shaft | Without second shaft end |
| Shaft diameter | 5 mm |
| Shaft length | 21.85 mm |
| Holding torque | 0.53 N.m |
| Rotor inertia | 0.082 kg.cm² |
| Resolution | 200 steps number of full steps per revolution; 1.8 ° step angle |
| [In] rated current | 1.5 A |
| Resistance | 2 Ohm (winding) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Ambient air temperature for operation | -25…40 °C |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| IP degree of protection | IP20 conforming to IEC/EN 60034-1 |
| Temperature class | B winding conforming to IEC/EN 60034-1 |
| Main |
| Range compatibility | Lexium SD2 |
| Product or component type | Motion control motor |
| Device short name | BRS2 |
| Motor type | 2-phase stepper motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 20 cm |
| Package 1 Width | 25.5 cm |
| Package 1 Length | 32.5 cm |
| Package 1 Weight | 402 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 20 |
| Package 2 Height | 20 cm |
| Package 2 Width | 25.5 cm |
| Package 2 Length | 32.5 cm |
| Package 2 Weight | 8.04 kg |
| Unit Type of Package 3 | S06 |
| Number of Units in Package 3 | 160 |
| Package 3 Height | 73.5 cm |
| Package 3 Width | 60 cm |
| Package 3 Length | 80 cm |
| Package 3 Weight | 77.32 kg |
Two-phase stepper motor from the Lexium BRS2 series. This motor series is characterized by its robust construction and enables very quiet and almost resonance-free operation. This motor has a holding torque of 0.53 Nm. The flange size is 42 mm. The motor consists of three power levels. The phase current is up to 1.5 A. Movements are carried out precisely, step by step, which are defined by a Lexium SD2 stepper motor amplifier and are thus perfectly coordinated.