Complementary
Response time on output	1.2 ms
Insulation resistance	> 10 MOhm 500 V DC
Current per channel	0.625 A
Maximum current per module	10 A
Paralleling of outputs	Yes : 2 maximum
Switching frequency	0.5/LI² Hz
Load impedance ohmic	>= 48 Ohm
Reverse polarity protection	Reverse mounted diode
MTBF reliability	383000 H
Protection type	reverse polarity protection; overload protection; overvoltage protection; short-circuit protection
Voltage detection threshold	< 14 V DC sensor fault; > 18 V DC sensor OK
Net weight	0.12 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Protective treatment	Conformal coating
Dielectric strength	1500 V AC at 50/60 Hz 1 minute, output/ground; 1500 V AC at 50/60 Hz 1 minute, output/internal logic
Relative humidity	5…95 % at 55 °C without condensation
Environmental characteristic	Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Product or component type	Discrete output module
Discrete output logic	Positive
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	18.000 cm
Package 1 Length	26.000 cm
Package 1 Weight	352.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	8
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	3.278 kg

This discrete safety output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and subracks for Modicon M340 and Modicon M580. This product consists of 8 non-isolated output channels and is supplied with 24 V DC (positive). This safety module can be used in harsher environments and operates in an extended temperature range of -25°C to +60°C and requires the Modicon M580 Safety Processor. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 382,097 hours. This module is certified by TÜV Rheinland up to SIL2/SIL3 according to IEC 61508/61511 for processes. It has been certified up to SILCL3 according to IEC 62061 and up to Cat. 4/Ple according to ISO 13849 for machinery and up to SIL4 according to EN 50126/502128/50129 for rail. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2. This module is compatible with Safety PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The height of the I/O module is greater than the height of a standard rack (Ethernet or X-Bus) and should be taken into account before installing the rack. The product must be installed in the module carrier and secured with 2 screws.