Schneider Electric BMXMSP0200, EAN: 3595863998634

Schneider Electric BMXMSP0200 PTO-Motion module 2-channel

Industrial Material > Automation > Industrial bus systems

Schneider Electric BMXMSP0200 PTO-Motion module 2-channel

Lieske Part No. 832731
Mfg Part No BMXMSP0200
EAN-Code 3595863998634
Manufacturer Schneider Electric
Here only 929,43 EUR
1.106,02 EUR incl. VAT

Further information for Schneider Electric BMXMSP0200 PTO-Motion module 2-channel

Complementary
Operating threshold> 12 V no error supply voltage; > 8 V error supply voltage
Input voltage24 V DC
Input current4.3 mA
Voltage state 1 guaranteed>= 11 V
Current consumption35 mA at 24 V DC preactuator; 150 mA at 3.3 V DC typical; 200 mA at 3.3 V DC maximum
Current state 1 guaranteed>= 2 mA
Voltage state 0 guaranteed5 V
Response time< 200 µs for position completed input and drive ready input; < 60 µs for origin input and proximity input
Number of outputs1 pulse output; 2 auxiliary output
Preactuator voltage detection threshold< 8 V error preactuator voltage auxiliary output; < 8 V no error preactuator voltage auxiliary output; > 14 V error preactuator voltage pulse output; > 14 V no error preactuator voltage pulse output
Output voltage24 V DC
Output voltage limits19...30 V
Discrete output current50 mA
Current per channel0.4 A
Maximum leakage current0.05 mA at state 0
[Ures] residual voltage0.15 V at state 1
Response time on output1.2...1.5 ms on appearance; 1.2...1.5 ms on disappearance
Load impedance ohmic15000 Ohm
Output overload protectionBy current limiter and electronic circuit breaker
Output short-circuit protectionBy current limiter and electronic circuit breaker
Reverse polarity protectionBy reverse mounting diode on output; Integrated on input
Insulation between channelsNo insulated
Insul btwn prim and second1500 Vrms
Insulation resistance> 10 MOhm
Local signalling1 LED (green) for module operating (RUN); 1 LED (red) for external fault (I/O); 1 LED (red) for internal fault, module failure (ERR); 1 LED (green) for download (DL); 8 LEDs (green) for channel status (CH00); 8 LEDs (green) for channel status (CH01)
Electrical connection2 connectors with 28 pins
Module formatStandard
Product certificationsCE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22
Contractual warranty
Warranty (in months)18
Environment
Ambient air temperature for operation-25…70 °C
Derating factorWithout
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive
StandardsIEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; IEC 61000-6-5, interface type 1 and type 2; IEC 61850-3, location G; IEC 60079-0
Environmental characteristicHazardous location class I division 2
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typePTO module
Number of channels2
Number of inputs4
Discrete input typeCurrent sink yes origin input conforming to IEC 61131-2 type 3; Current sink yes proximity input and limit switch input conforming to IEC 61131-2 type 3; Current sink or source counter in position input conforming to IEC 61131-2 type 3; Current sink or source drive ready, emergency input conforming to IEC 61131-2 type 3
Input compatibility2-wire/3-wire proximity sensor 19.2…30 V conforming to IEC 947-5-2
Output compatibilitySignal converter (USIC); RS422, 7 mA input; Source input, 5 V to 24 V
Output frequency200 kHz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.400 cm
Package 1 Width11.500 cm
Package 1 Length11.700 cm
Package 1 Weight147.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.527 kg
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This PTO module has 2 channels, 4 inputs with discrete logic (positive). It is a PTO module with an input/output voltage of 24V DC, an output current of 50mA and a maximum current consumption of 200mA at 3.3V DC. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing the costs of spare parts inventory, maintenance and training. It is equipped with two 28-pin connectors for electrical connection. There is no isolation between the channels. It complies with the standards EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201. This output is compatible with signal converter (USIC), RS422, 7mA input and source input, 5V to 24V. The input is compatible with a 2-wire/3-wire proximity sensor 19.2V to 30V according to IEC 947-5-2. The product must be installed in the module carrier and fixed with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/832731
qrcode für Schneider Electric BMXMSP0200 PTO-Motion module 2-channel