| Complementary |
| Output type | Reflex digital output |
| Cycle time | 1 ms |
| Isolation voltage | 1400 V DC for 1 min field/bus or ground; 1000 V DC for 1 min differential interfaces; 1000 V DC for 1 min input/output |
| Input type | High speed |
| Input voltage | 24 V DC; 100 V AC |
| Input voltage limits | 19.2...30 V at 60 °C; 26.4 V at 70 °C |
| Voltage state 1 guaranteed | MPU: 0.3...100 V AC; APU: 2.5...30 V DC |
| Voltage state 0 guaranteed | < 0.3 V |
| Discrete output logic | Positive logic (source) |
| Output voltage | 24 V DC |
| Output voltage limits | 19.2...30 V |
| Maximum load current | 1 A per module; 0.5 A per output |
| Maximum leakage current | 0.1 mA at state 0 |
| Output overload protection | Integrated |
| Output short-circuit protection | 1.5 A integrated |
| Overlap time | 0.2 ms |
| Electrical connection | Connector with 28 pins |
| Module format | Standard |
| Net weight | 0.124 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Ambient air temperature for operation | -25…70 °C |
| Relative humidity | 10…95 % without condensation |
| IP degree of protection | IP20 |
| Protective treatment | Conformal coating |
| Directives | 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive |
| Product certifications | CE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22 |
| Standards | IEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; IEC 61000-6-5, interface type 1 and type 2; IEC 61850-3, location G; IEC 60079-0 |
| Environmental characteristic | Gas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range of product | Modicon X80 |
| Product or component type | Frequency module |
| Product destination | Turbo machine |
| Product compatibility | M340 PLC; M580 PLC |
| Device application | Speed and frequency control |
| Number of channels | 2 |
| Input frequency | 0…500 kHz |
| Type of measurement | Frequency |
| Function available | Compare |
| Number of inputs | 2 (MPU); 2 (APU) |
| Input compatibility | 19.2…30 V incremental encoder; active pick-up sensor, 10...30 V totem pole; magnetic pick-up sensor |
| Number of outputs | 2 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 11.200 cm |
| Package 1 Length | 12.000 cm |
| Package 1 Weight | 165.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 6.170 kg |
This turbomachinery frequency input module is part of the Modicon X80 range, a common input/output offering for Modicon M340 and Modicon M580. The BMXETM0200H frequency input module provides turbine shaft and motor speed monitoring functions for general turbomachinery control applications. This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for deploying I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This turbomachinery frequency module is equipped with 2 discrete inputs and 2 digital reflex outputs. The housing provides IP20 protection for the electronics. This product complies with CE, UL, CSA, RCM and EAC standards and is certified for power generation, merchant marine, railway and hazardous area applications. This adapter is compatible with Modicon M580 BMEP58XX40(S), Modicon M580 BMEH58XX40(S) and Quantum processor. The product must be installed in the module carrier and secured with 2 screws.