Complementary
Counter functions	Count events; Up/down counter; Loop (modulo) counting; Frequency meter; Down counting; 32-bit counter counting
Cycle time	5 ms
Isolation voltage	1500 V for 60 s
Input type	High speed
Input voltage limits	24 V DC
Input current	4.5 mA
Voltage state 1 guaranteed	11...30 V DC
Current state 1 guaranteed	> 2 mA (for U >= 11V)
Voltage state 0 guaranteed	< 5 V DC
Current state 0 guaranteed	< 1.5 mA
Electrical connection	1 connector with 20 pins
Current consumption	200 mA at 3.3 V DC bus; 80 mA at 24 V DC sensor
Module format	Standard
Net weight	0.113 kg
Contractual warranty
Warranty (in months)	18
Environment
Ambient air temperature for operation	-25…70 °C
Relative humidity	10…95 % without condensation
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive
Product certifications	CE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22
Standards	IEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; EN/IEC 61000-6-5, interface type 1 and type 2; EN/IEC 61850-3, location G; IEC 60079-0
Environmental characteristic	Gas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2
Protective treatment	Conformal coating
Main
Range of product	Modicon M340 automation platform
Product or component type	Counter module
Product specific application	For severe environments
Number of channels	8
Maximum counting frequency	10000 Hz
Number of inputs	2 (single mode); 3 (special dual phase mode)
Input compatibility	19.2…30 V 2-wire/3-wire proximity sensor; incremental encoder with push-pull outputs, 10...30 V totem pole
Input voltage	24 V DC type 3
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	11.500 cm
Package 1 Length	11.700 cm
Package 1 Weight	148.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.533 kg

This counter module is part of the Modicon X80 range, a common input/output offering for Modicon M340 and Modicon M580. This harsh environment counter module is equipped with 8 high-speed channels. This robust product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing the cost of spare parts inventory, maintenance and training. The housing provides IP20 protection for the electronics. This product complies with CE, UL, CSA, RCM and EAC standards and is certified for power generation, merchant marine, railway and hazardous area applications. This input is compatible with 19.2V to 30V 2-wire/3-wire proximity sensors, incremental encoders with push-pull outputs, 10V to 30V. The product must be installed in the module carrier and secured with 2 screws.