Complementary
Counter functions	Up/down counter; 32-bit counter counting; Frequency meter; Loop (modulo) counting; Count events; Down counting
Cycle time	5 ms
Isolation voltage	1500 V for 60 s
Input type	High speed
Input voltage limits	24 V DC
Input current	4.5 mA
Voltage state 1 guaranteed	11...30 V DC
Current state 1 guaranteed	> 2 mA (for U >= 11V)
Voltage state 0 guaranteed	< 5 V DC
Current state 0 guaranteed	< 1.5 mA
Electrical connection	1 connector with 20 pins
Current consumption	200 mA at 3.3 V DC bus; 80 mA at 24 V DC sensor
Module format	Standard
Net weight	0.113 kg
Contractual warranty
Warranty (in months)	18
Environment
Ambient air temperature for operation	0…60 °C
Relative humidity	10…95 % without condensation
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Protective treatment	Standard version
Logistical informations
Country of origin	FR
Main
Range of product	Modicon M340 automation platform
Product or component type	Counter module
Number of channels	8
Maximum counting frequency	10000 Hz
Number of inputs	2 (single mode); 3 (special dual phase mode)
Input compatibility	19.2…30 V 2-wire/3-wire proximity sensor; incremental encoder with push-pull outputs, 10...30 V totem pole
Input voltage	24 V DC type 3
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.2 cm
Package 1 Width	11.0 cm
Package 1 Length	11.8 cm
Package 1 Weight	143.0 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.0 cm
Package 2 Width	30.0 cm
Package 2 Length	40.0 cm
Package 2 Weight	2.39 kg

This counter module is part of the Modicon X80 range, a common input/output offering for Modicon M340 and Modicon M580. This high-speed counter module has 8 channels, 2 single-mode inputs and 3 dedicated dual-phase mode inputs. The Modicon X80 automation platform meets the requirements of TC treatment (all climatic zones treatment) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a unified environment for the deployment of I/O modules in automation architectures by reducing the costs of spare parts inventory, maintenance and training. It is a counter module with an input voltage of 24V DC and a current consumption of 200mA at 3.3V DC bus, 80mA at 24V DC sensor. Counter functions are loop (modulo) counting, down counting, event counting, 32-bit counter counting, etc. The enclosure provides IP20 protection for the electronics. This product meets CE, UL, CSA, RCM and EAC standards and is certified for power generation, merchant marine, railway and hazardous area applications. This input is compatible with 19.2V to 30V 2-wire/3-wire proximity sensors, incremental encoders with push-pull outputs, 10V to 30V. The product must be installed in the module carrier and secured with 2 screws.