Schneider Electric BMXEHC0200H, EAN: 3595864010410

Schneider Electric BMXEHC0200H counter module 2-channel 6 inputs

Industrial Material > Automation > Industrial bus systems

Schneider Electric BMXEHC0200H counter module 2-channel 6 inputs

Lieske Part No. 749012
Mfg Part No BMXEHC0200H
EAN-Code 3595864010410
Manufacturer Schneider Electric
Here only 602,37 EUR
716,82 EUR incl. VAT

Further information for Schneider Electric BMXEHC0200H counter module 2-channel 6 inputs

Complementary
Counter functionsRatio count; Frequency meter; Down counting; 32-bit counter counting; Loop (modulo) counting; Measure time periods; Count events; Width modulation
Cycle time1 ms
Isolation voltage1500 V for 60 s
Input type3 auxiliary input; 3 high speed
Input voltage limits24 V DC
Input current2 mA at 11 V
Voltage state 1 guaranteed11...30 V DC
Current state 1 guaranteed> 2 mA (for U >= 11V)
Voltage state 0 guaranteed< 5 V DC
Current state 0 guaranteed< 1.5 mA
Discrete output logicPositive or negative configurable
Maximum output current2 A per module; 0.5 A per output
Output voltage limits19.2...30 V
Maximum load current1 A per module; 0.5 A per output
Maximum leakage current0.1 mA at state 0
Output overload protectionIntegrated
Output short-circuit protection1.5 A integrated
Overlap time0.2 ms
Electrical connection1 connector with 10 pins for wiring auxiliary input and sensor power supply; 1 connector with 16 pins for wiring the sensors of counter 0; 1 connector with 16 pins for wiring the sensors of counter 1
Current consumption200 mA at 3.3 V DC bus; 40 mA at 24 V DC rack; 80 mA at 24 V DC sensor
Module formatStandard
Net weight0.112 kg
Contractual warranty
Warranty (in months)18
Environment
Ambient air temperature for operation-25…70 °C
Relative humidity10…95 % without condensation
IP degree of protectionIP20
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certificationsCE; UL; CSA; RCM; EAC; Merchant Navy
StandardsIEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; EN/IEC 61000-6-5, interface type 1 and type 2; EN/IEC 61850-3, location G
Environmental characteristicGas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2
Protective treatmentConformal coating
Logistical informations
Country of originFR
Main
Range of productModicon M340 automation platform
Product or component typeCounter module
Product specific applicationFor severe environments
Number of channels2
Maximum counting frequency60000 Hz
Number of inputs6
Input compatibility19.2…30 V 2-wire/3-wire proximity sensor; incremental encoder with push-pull outputs, 10...30 V totem pole
Input voltage24 V DC type 3
Number of outputs2
Output voltage24 V DC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width11.500 cm
Package 1 Length11.800 cm
Package 1 Weight145.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.534 kg
This counter module is part of the Modicon X80 range, a common input/output offering for Modicon M340 and Modicon M580. This harsh environment counter module is equipped with 2 high-speed channels. This robust product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing the cost of spare parts inventory, maintenance and training. The enclosure provides IP20 protection for the electronics. This product complies with CE, UL, CSA, RCM and EAC standards and is certified for power generation, merchant marine, railway and hazardous area applications. This input is compatible with 19.2V to 30V 2-wire/3-wire proximity sensors, incremental encoders with push-pull outputs, 10V to 30V. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/749012
qrcode für Schneider Electric BMXEHC0200H counter module 2-channel 6 inputs