Schneider Electric BMXDDO6402K, EAN: 3595863910490

Schneider Electric BMXDDO6402K PLC module 64DO 24 V DC

Industrial Material > Automation > PLC Systems

Schneider Electric BMXDDO6402K PLC module 64DO 24 V DC

Lieske Part No. 603162
Mfg Part No BMXDDO6402K
EAN-Code 3595863910490
Manufacturer Schneider Electric
Here only 715,19 EUR
851,08 EUR incl. VAT

Further information for Schneider Electric BMXDDO6402K PLC module 64DO 24 V DC

Complementary
Response time on output1.2 ms
Insulation resistance> 10 MOhm 500 V DC
Current per channel0.125 A
Maximum current per module6.4 A
Paralleling of outputsYes : 3 maximum
Switching frequency0.5/LI² Hz
Maximum overload time15 ms
Load impedance ohmic>= 220 Ohm
Reverse polarity protectionReverse mounted diode
MTBF reliability150000 H
Protection typeExternal fuse reverse polarity protection; short-circuit protection; overload protection; overvoltage protection
Voltage detection threshold< 14 V DC preactuator fault; > 18 V DC preactuator at state 0
Net weight0.15 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Protective treatmentStandard version
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength1500 V AC at 50/60 Hz 1 minute, output/ground; 1500 V AC at 50/60 Hz 1 minute, output/internal logic; 500 V DC 1 minute, between group of channels
Relative humidity5…95 % at 55 °C without condensation
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typeDiscrete output module
Discrete output logicPositive
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.800 cm
Package 1 Width11.300 cm
Package 1 Length11.300 cm
Package 1 Weight180.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight3.410 kg
Unit Type of Package 3P06
Number of Units in Package 3240
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight62.560 kg
The discrete output module BMXDDO6402K from Schneider Electric belongs to the Modicon X80 product line and serves as a transistor output module for controlling industrial systems. It features 64 output channels and is designed for an operating voltage of 24 V DC with positive logic. The module is part of a modular system that includes common input/output and communication modules, power supplies, and module carriers for the PLC systems Modicon M340 and M580. It enables standardized integration into automation architectures, thereby reducing spare parts inventory as well as maintenance and training efforts.

Applications

The module is used in applications requiring a high number of digital outputs, for example in Smart Infrastructure, water and wastewater treatment, the packaging industry, mining, metalworking, data centers, and power generation. The operating temperature ranges from 0 °C to +60 °C, with the operating environment allowing a relative humidity of 5 % to 95 % at 55 °C, excluding condensation. The TC treatment (treatment for all climate zones) ensures robust functionality under various environmental conditions.

Functions and Features in Detail

Each output channel can supply a current of 0.125 A (125 mA), with the maximum total current per module being 6.4 A. The outputs can be paralleled, with a maximum of three outputs allowed in parallel configuration. The response time at the output is 1.2 ms, ensuring fast signal transmission in control applications. The load impedance must be at least 220 Ohm to ensure correct operation. The voltage detection thresholds are below 14 V DC (pre-activation fault) and above 18 V DC (pre-activation in state 0), enabling safe operational monitoring.

Technology Explained Simply

The module features several integrated protection functions: reverse polarity protection via a blocking diode, short-circuit protection, overload protection, and overvoltage protection. These protection functions safeguard the module and connected loads against damage caused by incorrect operation or disturbances. The insulation resistance is specified as > 10 MΩ at 500 V DC, ensuring high electrical insulation between components. The voltage withstand is 1500 V AC at 50/60 Hz for 1 minute between output and ground, as well as between output and internal logic, and 500 V DC between groups of channels. The MTBF (mean time between failures) is 150,000 hours, indicating high reliability in continuous operation.

Compatibility and Accessories

The module is compatible with the PLC systems Modicon M340 and Modicon M580, both in local and remote I/O configurations. It requires a module carrier and is secured with two screws. The connection connectors are 40-pin. Accessories include various cables (e.g. BMXFCW503, BMXFCC203) and terminal blocks (e.g. ABE7H16C31, ABE7H16F43), enabling flexible wiring and integration into existing systems.

Mounting and Installation

Installation is performed by inserting the module into a module carrier, where it is fixed with two screws. The protection rating IP20 safeguards against contact with moving parts and ingress of solid foreign objects larger than 12.5 mm, but does not protect against water or dust. The operating environment must comply with the specified temperature and humidity limits to ensure reliable operation.

Operational Advantages

The uniform module architecture of the Modicon X80 series enables standardized maintenance and reduces spare parts inventory. The integrated protection functions increase system availability and reduce failure risks. The high MTBF and robust construction ensure a long service life in industrial use. Compatibility with M340 and M580 systems offers flexibility in system selection and expansion.

Certifications and Standards

The module complies with the requirements of the Low Voltage Directive 2014/35/EU and the Electromagnetic Compatibility Directive 2014/30/EU. It is certified to CE, UL, CSA, RCM, EAC, UKCA, and Marine. Standards EN 61000-6-5 (immunity to electromagnetic disturbances), EN 61850-3 (requirements for protection and control systems in power supply installations), and EN 61131-2 (programmable logic controllers) are met. The warranty period is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/603162
qrcode für Schneider Electric BMXDDO6402K PLC module 64DO 24 V DC