Complementary
Discrete input current	0.6 mA at 24 V DC
Voltage state 1 guaranteed	>= 15 V
Input impedance	40000 Ohm
Insulation resistance	> 10 MOhm 500 V DC
DC typical response time	4 ms
DC maximum response time	7 ms
Sensor power supply	: 19…30 V
Typical current consumption	160 mA at 3.3 V DC
Current consumption	226 mA at 3.3 V DC
Power dissipation in W	4.3 W
Isolation between channels and bus	1500 V for 1 minute
MTBF reliability	510000 H
Voltage detection threshold	< 14 V DC sensor fault; > 18 V DC sensor OK
Local signalling	1 LED (green) for +32 channels indicator; 1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height	134.6 mm
Width	32 mm
Depth	86 mm
Net weight	0.145 kg
Paralleling of inputs
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Protective treatment	Conformal coating
Marking	CE; UKCA; CULus; RCM; EAC
Product certifications	ATEX zone 2; IECEx zone 2; CCC Ex zone 2 (pending); CULus HazLoc
Standards	IEC 61131-2
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength	1500 V AC at 50/60 Hz 1 minute, primary/secondary; 500 V DC 1 minute, between group of channels
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-40…85 °C
Relative humidity	5…95 % at -25…70 °C without condensation
Operating altitude	0...2000 m; 2000...5000 m with derating
Pollution degree	2
Environmental characteristic	Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2
Vibration resistance	3 gn
Shock resistance	30 gn
Main
Range of product	Modicon X80
Product or component type	Discrete input module
Device application	Industrial application in severe environment
Discrete input number	64
Discrete input voltage	24 V DC for isolated
Discrete input logic	Positive logic (sink)
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	12.000 cm
Package 1 Length	11.000 cm
Package 1 Weight	191.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	3.130 kg
Unit Type of Package 3	P06
Number of Units in Package 3	240
Package 3 Height	90.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	58.550 kg

This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 64 input channels and is powered by 24V DC (positive). This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 511,375 hours. This product meets the needs of our customers in the Smart Infrastructure, Water & Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with two 40-pin connectors. The product must be installed in the module carrier and secured with 2 screws.