Further information for Schneider Electric BMXDDI6402K PLC module 64DI 24VDC
Complementary
Discrete input current
0.6 mA at 24 V DC
Voltage state 1 guaranteed
>= 15 V
Input impedance
40000 Ohm
Insulation resistance
> 10 MOhm 500 V DC
DC typical response time
4 ms
DC maximum response time
7 ms
Sensor power supply
: 19…30 V
Typical current consumption
160 mA DC
Power dissipation in W
4.3 W
Isolation between channels and bus
1500 V for 1 minute
MTBF reliability
510000 H
Voltage detection threshold
< 14 V DC sensor fault; > 18 V DC sensor OK
Local signalling
1 LED (green) for +32 channels indicator; 1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height
134.6 mm
Width
32 mm
Depth
86 mm
Net weight
0.145 kg
Paralleling of inputs
Hot swapping fallback
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20
Protective treatment
Standard version
Marking
CE; UKCA; CULus; RCM; EAC
Directives
2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength
1500 V AC at 50/60 Hz 1 minute, primary/secondary; 500 V DC 1 minute, between group of channels
Ambient air temperature for operation
0…60 °C
Ambient air temperature for storage
-40…85 °C
Relative humidity
5…95 % at 55 °C without condensation
Operating altitude
0...2000 m; 2000...5000 m with derating
Pollution degree
2
Vibration resistance
3 gn
Shock resistance
30 gn
Logistical informations
Country of origin
ID
Main
Range of product
Modicon X80
Product or component type
Discrete input module
Discrete input number
64
Discrete input voltage
24 V DC for isolated
Discrete input logic
Positive logic (sink)
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.700 cm
Package 1 Width
11.200 cm
Package 1 Length
11.800 cm
Package 1 Weight
180.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
15
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.420 kg
Unit Type of Package 3
P06
Number of Units in Package 3
240
Package 3 Height
75.000 cm
Package 3 Width
60.000 cm
Package 3 Length
80.000 cm
Package 3 Weight
60.000 kg
This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 64 input channels and is powered by 24V DC (positive). This product meets the TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. It has an external fuse per channel group 0.5A fast blow and without reverse polarity protection. This product has an IP20 protection class and offers an MTBF of 511,375 hours. This product meets the needs of our customers in the Smart Infrastructure, Water and Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Marine and complies with EN 61000-6-5 and EN 61850-3 standards. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with two 40-pin connectors. The product must be installed in the module carrier and secured with 2 screws.