Further information for Schneider Electric BMXDDI3232 input module 32 digital
Complementary
Input wiring mode
2 or 3 wires
Discrete input current
3.3 mA at 12 V DC; 3.3 mA at 24 V DC
Voltage state 1 guaranteed
>= 10 V;
Voltage state 0 guaranteed
= -5 V
Current state 1 guaranteed
>= 2 mA
Input impedance
7270 Ohm
Insulation resistance
> 10 MOhm 500 V DC
DC typical response time
4 ms
DC maximum response time
7 ms
Sensor power supply
: 19…30 V
Typical current consumption
100 mA at 3.3 V DC; 7.6 mA at 24 V DC
Current consumption
130 mA at 3.3 V DC; 11.5 mA at 24 V DC
Power dissipation in W
4.7 W
Isolation between channels and bus
1500 V for 1 minute
MTBF reliability
2200000 H
Voltage detection threshold
< 14 V DC sensor fault; > 19 V DC sensor OK
Local signalling
1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height
134.6 mm
Width
32 mm
Depth
86 mm
Net weight
0.137 kg
Paralleling of outputs
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20
Protective treatment
Standard version
Marking
CE; UKCA; CULus; RCM; EAC
Standards
IEC 61131-2
Directives
2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength
1500 V AC at 50/60 Hz 1 minute, primary/secondary; 1500 V AC at 50/60 Hz 1 minute, between group of channels
Ambient air temperature for operation
0…60 °C
Ambient air temperature for storage
-40…85 °C
Relative humidity
5…95 % at -25…70 °C without condensation
Operating altitude
0...2000 m; 2000...5000 m with derating
Pollution degree
2
Vibration resistance
3 gn
Shock resistance
30 gn
Logistical informations
Country of origin
ID
Main
Range of product
Modicon X80
Product or component type
Discrete input module
Device application
Industrial application
Discrete input number
32
Discrete input voltage
12 V DC for isolated; 24 V DC for isolated
Discrete input logic
Positive logic (sink); Negative logic (source)
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.600 cm
Package 1 Width
18.200 cm
Package 1 Length
25.800 cm
Package 1 Weight
306.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
10
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.780 kg
Dieses digitale Eingangsmodul ist Teil der Modicon X80-Reihe, einem Angebot gemeinsamer Ein-/Ausgangs- und Kommunikationsmodule, Stromversorgungen und Modulträgern für Modicon M340 und Modicon M580. Dieses Produkt besteht aus 32 Eingangskanälen und wird mit 12/24V DC (positive oder negative Logik) gespeist. Dieses Produkt erfüllt die TC-Behandlungsanforderungen (Behandlung für alle Klimazonen) und kann in einem Temperaturbereich von 0°C bis +60°C/32°F bis 140°F betrieben werden. Modicon X80-Module bieten eine einheitliche Umgebung für den Einsatz von E/A-Modulen in Automatisierungsarchitekturen, indem sie den Ersatzteilbestand sowie die Wartungs- und Schulungskosten reduzieren. Dieses Produkt entspricht der Schutzklasse IP20 und bietet eine MTBF von 2.193.030 Stunden. Dieses Produkt erfüllt die Anforderungen unserer Kunden aus den Bereichen Smart Infrastructure, Wasser und Abwasser, verpackte Konsumgüter, Bergbau, Mineralien, Metalle, Rechenzentren und Energieerzeugung. Dieses Produkt ist von CE, UL, CSA, RCM, EAC, UKCA und der Handelsmarine zertifiziert und erfüllt die Normen EN 61000-6-5, EN 61850-3 und EN 61131-2 Typ 3. Dieses Modul ist kompatibel mit Modicon M340, M580 (Lokale oder Remote-E/A) SPSen mit einer abnehmbaren 40-poligen Käfig- oder Federkraftklemme. Das Produkt muss in den Modulträger eingebaut und mit 2 Schrauben befestigt werden.